| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210920163935.773644592@linuxfoundation.org>
Date: Mon, 20 Sep 2021 18:42:35 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Luiz Augusto von Dentz <luiz.von.dentz@...el.com>,
Marcel Holtmann <marcel@...tmann.org>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.4 137/260] Bluetooth: Fix handling of LE Enhanced Connection Complete
From: Luiz Augusto von Dentz <luiz.von.dentz@...el.com>
[ Upstream commit cafae4cd625502f65d1798659c1aa9b62d38cc56 ]
LE Enhanced Connection Complete contains the Local RPA used in the
connection which must be used when set otherwise there could problems
when pairing since the address used by the remote stack could be the
Local RPA:
BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 4, Part E
page 2396
'Resolvable Private Address being used by the local device for this
connection. This is only valid when the Own_Address_Type (from the
HCI_LE_Create_Connection, HCI_LE_Set_Advertising_Parameters,
HCI_LE_Set_Extended_Advertising_Parameters, or
HCI_LE_Extended_Create_Connection commands) is set to 0x02 or
0x03, and the Controller generated a resolvable private address for the
local device using a non-zero local IRK. For other Own_Address_Type
values, the Controller shall return all zeros.'
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@...el.com>
Signed-off-by: Marcel Holtmann <marcel@...tmann.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
net/bluetooth/hci_event.c | 93 ++++++++++++++++++++++++++-------------
1 file changed, 62 insertions(+), 31 deletions(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 82e42d8e2ea0..31469ff084cd 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4920,9 +4920,64 @@ static void hci_disconn_phylink_complete_evt(struct hci_dev *hdev,
}
#endif
+static void le_conn_update_addr(struct hci_conn *conn, bdaddr_t *bdaddr,
+ u8 bdaddr_type, bdaddr_t *local_rpa)
+{
+ if (conn->out) {
+ conn->dst_type = bdaddr_type;
+ conn->resp_addr_type = bdaddr_type;
+ bacpy(&conn->resp_addr, bdaddr);
+
+ /* Check if the controller has set a Local RPA then it must be
+ * used instead or hdev->rpa.
+ */
+ if (local_rpa && bacmp(local_rpa, BDADDR_ANY)) {
+ conn->init_addr_type = ADDR_LE_DEV_RANDOM;
+ bacpy(&conn->init_addr, local_rpa);
+ } else if (hci_dev_test_flag(conn->hdev, HCI_PRIVACY)) {
+ conn->init_addr_type = ADDR_LE_DEV_RANDOM;
+ bacpy(&conn->init_addr, &conn->hdev->rpa);
+ } else {
+ hci_copy_identity_address(conn->hdev, &conn->init_addr,
+ &conn->init_addr_type);
+ }
+ } else {
+ conn->resp_addr_type = conn->hdev->adv_addr_type;
+ /* Check if the controller has set a Local RPA then it must be
+ * used instead or hdev->rpa.
+ */
+ if (local_rpa && bacmp(local_rpa, BDADDR_ANY)) {
+ conn->resp_addr_type = ADDR_LE_DEV_RANDOM;
+ bacpy(&conn->resp_addr, local_rpa);
+ } else if (conn->hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) {
+ /* In case of ext adv, resp_addr will be updated in
+ * Adv Terminated event.
+ */
+ if (!ext_adv_capable(conn->hdev))
+ bacpy(&conn->resp_addr,
+ &conn->hdev->random_addr);
+ } else {
+ bacpy(&conn->resp_addr, &conn->hdev->bdaddr);
+ }
+
+ conn->init_addr_type = bdaddr_type;
+ bacpy(&conn->init_addr, bdaddr);
+
+ /* For incoming connections, set the default minimum
+ * and maximum connection interval. They will be used
+ * to check if the parameters are in range and if not
+ * trigger the connection update procedure.
+ */
+ conn->le_conn_min_interval = conn->hdev->le_conn_min_interval;
+ conn->le_conn_max_interval = conn->hdev->le_conn_max_interval;
+ }
+}
+
static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
- bdaddr_t *bdaddr, u8 bdaddr_type, u8 role, u16 handle,
- u16 interval, u16 latency, u16 supervision_timeout)
+ bdaddr_t *bdaddr, u8 bdaddr_type,
+ bdaddr_t *local_rpa, u8 role, u16 handle,
+ u16 interval, u16 latency,
+ u16 supervision_timeout)
{
struct hci_conn_params *params;
struct hci_conn *conn;
@@ -4970,32 +5025,7 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
cancel_delayed_work(&conn->le_conn_timeout);
}
- if (!conn->out) {
- /* Set the responder (our side) address type based on
- * the advertising address type.
- */
- conn->resp_addr_type = hdev->adv_addr_type;
- if (hdev->adv_addr_type == ADDR_LE_DEV_RANDOM) {
- /* In case of ext adv, resp_addr will be updated in
- * Adv Terminated event.
- */
- if (!ext_adv_capable(hdev))
- bacpy(&conn->resp_addr, &hdev->random_addr);
- } else {
- bacpy(&conn->resp_addr, &hdev->bdaddr);
- }
-
- conn->init_addr_type = bdaddr_type;
- bacpy(&conn->init_addr, bdaddr);
-
- /* For incoming connections, set the default minimum
- * and maximum connection interval. They will be used
- * to check if the parameters are in range and if not
- * trigger the connection update procedure.
- */
- conn->le_conn_min_interval = hdev->le_conn_min_interval;
- conn->le_conn_max_interval = hdev->le_conn_max_interval;
- }
+ le_conn_update_addr(conn, bdaddr, bdaddr_type, local_rpa);
/* Lookup the identity address from the stored connection
* address and address type.
@@ -5089,7 +5119,7 @@ static void hci_le_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type,
- ev->role, le16_to_cpu(ev->handle),
+ NULL, ev->role, le16_to_cpu(ev->handle),
le16_to_cpu(ev->interval),
le16_to_cpu(ev->latency),
le16_to_cpu(ev->supervision_timeout));
@@ -5103,7 +5133,7 @@ static void hci_le_enh_conn_complete_evt(struct hci_dev *hdev,
BT_DBG("%s status 0x%2.2x", hdev->name, ev->status);
le_conn_complete_evt(hdev, ev->status, &ev->bdaddr, ev->bdaddr_type,
- ev->role, le16_to_cpu(ev->handle),
+ &ev->local_rpa, ev->role, le16_to_cpu(ev->handle),
le16_to_cpu(ev->interval),
le16_to_cpu(ev->latency),
le16_to_cpu(ev->supervision_timeout));
@@ -5134,7 +5164,8 @@ static void hci_le_ext_adv_term_evt(struct hci_dev *hdev, struct sk_buff *skb)
if (conn) {
struct adv_info *adv_instance;
- if (hdev->adv_addr_type != ADDR_LE_DEV_RANDOM)
+ if (hdev->adv_addr_type != ADDR_LE_DEV_RANDOM ||
+ bacmp(&conn->resp_addr, BDADDR_ANY))
return;
if (!hdev->cur_adv_instance) {
--
2.30.2
Powered by blists - more mailing lists