| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210920163926.957566751@linuxfoundation.org>
Date: Mon, 20 Sep 2021 18:44:59 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Rafał Miłecki <rafal@...ecki.pl>,
"David S. Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.14 161/168] net: dsa: b53: Fix IMP port setup on BCM5301x
From: Rafał Miłecki <rafal@...ecki.pl>
[ Upstream commit 63f8428b4077de3664eb0b252393c839b0b293ec ]
Broadcom's b53 switches have one IMP (Inband Management Port) that needs
to be programmed using its own designed register. IMP port may be
different than CPU port - especially on devices with multiple CPU ports.
For that reason it's required to explicitly note IMP port index and
check for it when choosing a register to use.
This commit fixes BCM5301x support. Those switches use CPU port 5 while
their IMP port is 8. Before this patch b53 was trying to program port 5
with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5).
It may be possible to also replace "cpu_port" usages with
dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/dsa/b53/b53_common.c | 28 +++++++++++++++++++++++++---
drivers/net/dsa/b53/b53_priv.h | 1 +
2 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 5646eb8afe38..604f54112665 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1144,7 +1144,7 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
u8 reg, val, off;
/* Override the port settings */
- if (port == dev->cpu_port) {
+ if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
} else {
@@ -1168,7 +1168,7 @@ static void b53_force_port_config(struct b53_device *dev, int port,
u8 reg, val, off;
/* Override the port settings */
- if (port == dev->cpu_port) {
+ if (port == dev->imp_port) {
off = B53_PORT_OVERRIDE_CTRL;
val = PORT_OVERRIDE_EN;
} else {
@@ -1236,7 +1236,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
b53_force_link(dev, port, phydev->link);
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
- if (port == 8)
+ if (port == dev->imp_port)
off = B53_RGMII_CTRL_IMP;
else
off = B53_RGMII_CTRL_P(port);
@@ -2280,6 +2280,7 @@ struct b53_chip_data {
const char *dev_name;
u16 vlans;
u16 enabled_ports;
+ u8 imp_port;
u8 cpu_port;
u8 vta_regs[3];
u8 arl_bins;
@@ -2304,6 +2305,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 2,
.arl_buckets = 1024,
+ .imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
@@ -2314,6 +2316,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 2,
.arl_buckets = 1024,
+ .imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
@@ -2324,6 +2327,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2337,6 +2341,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2350,6 +2355,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2363,6 +2369,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x7f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2377,6 +2384,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.vta_regs = B53_VTA_REGS,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -2389,6 +2397,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0xff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2402,6 +2411,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2415,6 +2425,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0, /* pdata must provide them */
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_63XX,
.duplex_reg = B53_DUPLEX_STAT_63XX,
@@ -2428,6 +2439,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2441,6 +2453,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2454,6 +2467,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2467,6 +2481,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2480,6 +2495,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1f,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2493,6 +2509,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2506,6 +2523,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x103,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2520,6 +2538,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 256,
+ .imp_port = 8,
.cpu_port = 8, /* TODO: ports 4, 5, 8 */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2533,6 +2552,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2546,6 +2566,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 256,
+ .imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2571,6 +2592,7 @@ static int b53_switch_init(struct b53_device *dev)
dev->vta_regs[1] = chip->vta_regs[1];
dev->vta_regs[2] = chip->vta_regs[2];
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+ dev->imp_port = chip->imp_port;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
dev->num_arl_bins = chip->arl_bins;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 9bf8319342b0..5d068acf7cf8 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -123,6 +123,7 @@ struct b53_device {
/* used ports mask */
u16 enabled_ports;
+ unsigned int imp_port;
unsigned int cpu_port;
/* connect specific data */
--
2.30.2
Powered by blists - more mailing lists