[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210920095218.1108151-3-horatiu.vultur@microchip.com>
Date: Mon, 20 Sep 2021 11:52:08 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <davem@...emloft.net>, <kuba@...nel.org>, <robh+dt@...nel.org>,
<andrew@...n.ch>, <linux@...linux.org.uk>, <f.fainelli@...il.com>,
<alexandre.belloni@...tlin.com>, <vladimir.oltean@....com>,
<UNGLinuxDriver@...rochip.com>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <linux-pm@...r.kernel.org>
CC: Horatiu Vultur <horatiu.vultur@...rochip.com>
Subject: [RFC PATCH net-next 02/12] net: phy: mchp: Add support for LAN8804 PHY
The LAN8804 SKY has same features as that of LAN8804 SKY except that it
doesn't support 1588, SyncE or Q-USGMII.
This PHY is found inside the LAN966X switches.
Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
drivers/net/phy/micrel.c | 73 ++++++++++++++++++++++++++++++++++++++
include/linux/micrel_phy.h | 1 +
2 files changed, 74 insertions(+)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5c928f827173..34800b547004 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1537,6 +1537,65 @@ static int ksz886x_cable_test_get_status(struct phy_device *phydev,
return ret;
}
+#define LAN_EXT_PAGE_ACCESS_CONTROL 0x16
+#define LAN_EXT_PAGE_ACCESS_ADDRESS_DATA 0x17
+#define LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC 0x4000
+
+#define LAN8804_ALIGN_SWAP 0x4a
+#define LAN8804_ALIGN_TX_A_B_SWAP 0x1
+#define LAN8804_ALIGN_TX_A_B_SWAP_MASK GENMASK(2, 0)
+#define LAN8814_CLOCK_MANAGEMENT 0xd
+#define LAN8814_LINK_QUALITY 0x8e
+
+static int lanphy_read_page_reg(struct phy_device *phydev, int page, u32 addr)
+{
+ u32 data;
+
+ phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
+ phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
+ phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
+ (page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC));
+ data = phy_read(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA);
+
+ return data;
+}
+
+static int lanphy_write_page_reg(struct phy_device *phydev, int page, u16 addr,
+ u16 val)
+{
+ phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL, page);
+ phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, addr);
+ phy_write(phydev, LAN_EXT_PAGE_ACCESS_CONTROL,
+ (page | LAN_EXT_PAGE_ACCESS_CTRL_EP_FUNC));
+
+ val = phy_write(phydev, LAN_EXT_PAGE_ACCESS_ADDRESS_DATA, val);
+ if (val) {
+ phydev_err(phydev, "Error: phy_write has returned error %d\n",
+ val);
+ return val;
+ }
+ return 0;
+}
+
+static int lan8804_config_init(struct phy_device *phydev)
+{
+ int val;
+
+ /* MDI-X setting for swap A,B transmit */
+ val = lanphy_read_page_reg(phydev, 2, LAN8804_ALIGN_SWAP);
+ val &= ~LAN8804_ALIGN_TX_A_B_SWAP_MASK;
+ val |= LAN8804_ALIGN_TX_A_B_SWAP;
+ lanphy_write_page_reg(phydev, 2, LAN8804_ALIGN_SWAP, val);
+
+ /* Make sure that the PHY will not stop generating the clock when the
+ * link partner goes down
+ */
+ lanphy_write_page_reg(phydev, 31, LAN8814_CLOCK_MANAGEMENT, 0x27e);
+ lanphy_read_page_reg(phydev, 1, LAN8814_LINK_QUALITY);
+
+ return 0;
+}
+
static struct phy_driver ksphy_driver[] = {
{
.phy_id = PHY_ID_KS8737,
@@ -1718,6 +1777,20 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
.resume = kszphy_resume,
+}, {
+ .phy_id = PHY_ID_LAN8804,
+ .phy_id_mask = MICREL_PHY_ID_MASK,
+ .name = "Microchip LAN966X Gigabit PHY",
+ .config_init = lan8804_config_init,
+ .driver_data = &ksz9021_type,
+ .probe = kszphy_probe,
+ .soft_reset = genphy_soft_reset,
+ .read_status = ksz9031_read_status,
+ .get_sset_count = kszphy_get_sset_count,
+ .get_strings = kszphy_get_strings,
+ .get_stats = kszphy_get_stats,
+ .suspend = genphy_suspend,
+ .resume = kszphy_resume,
}, {
.phy_id = PHY_ID_KSZ9131,
.phy_id_mask = MICREL_PHY_ID_MASK,
diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h
index 3d43c60b49fa..1f7c33b2f5a3 100644
--- a/include/linux/micrel_phy.h
+++ b/include/linux/micrel_phy.h
@@ -28,6 +28,7 @@
#define PHY_ID_KSZ9031 0x00221620
#define PHY_ID_KSZ9131 0x00221640
#define PHY_ID_LAN8814 0x00221660
+#define PHY_ID_LAN8804 0x00221670
#define PHY_ID_KSZ886X 0x00221430
#define PHY_ID_KSZ8863 0x00221435
--
2.31.1
Powered by blists - more mailing lists