linux-kernel - [PATCH 4.9 114/175] usb: gadget: composite: Allow bMaxPower=0 if self-powered

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210920163921.802866031@linuxfoundation.org>
Date:   Mon, 20 Sep 2021 18:42:43 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Felipe Balbi <balbi@...nel.org>,
        Ronak Vijay Raheja <rraheja@...eaurora.org>,
        Jack Pham <jackp@...eaurora.org>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.9 114/175] usb: gadget: composite: Allow bMaxPower=0 if self-powered

From: Jack Pham <jackp@...eaurora.org>

[ Upstream commit bcacbf06c891374e7fdd7b72d11cda03b0269b43 ]

Currently the composite driver encodes the MaxPower field of
the configuration descriptor by reading the c->MaxPower of the
usb_configuration only if it is non-zero, otherwise it falls back
to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW.
However, there are cases when a configuration must explicitly set
bMaxPower to 0, particularly if its bmAttributes also has the
Self-Powered bit set, which is a valid combination.

This is specifically called out in the USB PD specification section
9.1, in which a PDUSB device "shall report zero in the bMaxPower
field after negotiating a mutually agreeable Contract", and also
verified by the USB Type-C Functional Test TD.4.10.2 Sink Power
Precedence Test.

The fix allows the c->MaxPower to be used for encoding the bMaxPower
even if it is 0, if the self-powered bit is also set.  An example
usage of this would be for a ConfigFS gadget to be dynamically
updated by userspace when the Type-C connection is determined to be
operating in Power Delivery mode.

Co-developed-by: Ronak Vijay Raheja <rraheja@...eaurora.org>
Acked-by: Felipe Balbi <balbi@...nel.org>
Signed-off-by: Ronak Vijay Raheja <rraheja@...eaurora.org>
Signed-off-by: Jack Pham <jackp@...eaurora.org>
Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/usb/gadget/composite.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f33635ab967f..438efa36552c 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -481,7 +481,7 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
 {
 	unsigned val;

-	if (c->MaxPower)
+	if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
 		val = c->MaxPower;
 	else
 		val = CONFIG_USB_GADGET_VBUS_DRAW;
@@ -886,7 +886,11 @@ static int set_config(struct usb_composite_dev *cdev,
 	}

 	/* when we return, be sure our power usage is valid */
-	power = c->MaxPower ? c->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
+	if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
+		power = c->MaxPower;
+	else
+		power = CONFIG_USB_GADGET_VBUS_DRAW;
+
 	if (gadget->speed < USB_SPEED_SUPER)
 		power = min(power, 500U);
 	else
-- 
2.30.2