[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210920065946.15090-3-manivannan.sadhasivam@linaro.org>
Date: Mon, 20 Sep 2021 12:29:45 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: kishon@...com, lorenzo.pieralisi@....com, bhelgaas@...gle.com,
robh@...nel.org
Cc: devicetree@...r.kernel.org, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
hemantk@...eaurora.org, bjorn.andersson@...aro.org,
sallenki@...eaurora.org, skananth@...eaurora.org,
vpernami@...eaurora.org, vbadigan@...eaurora.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Siddartha Mohanadoss <smohanad@...eaurora.org>
Subject: [PATCH v8 2/3] PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver
Add driver support for Qualcomm PCIe Endpoint controller driver based on
the Designware core with added Qualcomm specific wrapper around the
core. The driver support is very basic such that it supports only
enumeration, PCIe read/write, and MSI. There is no ASPM and PM support
for now but these will be added later.
The driver is capable of using the PERST# and WAKE# side-band GPIOs for
operation and written on top of the DWC PCI framework.
Reviewed-by: Rob Herring <robh@...nel.org>
Co-developed-by: Siddartha Mohanadoss <smohanad@...eaurora.org>
Signed-off-by: Siddartha Mohanadoss <smohanad@...eaurora.org>
[mani: restructured the driver and fixed several bugs for upstream]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
drivers/pci/controller/dwc/Kconfig | 10 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-qcom-ep.c | 710 ++++++++++++++++++++++
3 files changed, 721 insertions(+)
create mode 100644 drivers/pci/controller/dwc/pcie-qcom-ep.c
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 76c0a63a3f64..49bcbe18a575 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -180,6 +180,16 @@ config PCIE_QCOM
PCIe controller uses the DesignWare core plus Qualcomm-specific
hardware wrappers.
+config PCIE_QCOM_EP
+ tristate "Qualcomm PCIe controller - Endpoint mode"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ help
+ Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
+ to work in endpoint mode. The PCIe controller uses the DesignWare core
+ plus Qualcomm-specific hardware wrappers.
+
config PCIE_ARMADA_8K
bool "Marvell Armada-8K PCIe controller"
depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 73244409792c..8ba7b67f5e50 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
+obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
obj-$(CONFIG_PCIE_ROCKCHIP_DW_HOST) += pcie-dw-rockchip.o
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
new file mode 100644
index 000000000000..e379065b6aca
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -0,0 +1,710 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Qualcomm PCIe Endpoint controller driver
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Author: Siddartha Mohanadoss <smohanad@...eaurora.org
+ *
+ * Copyright (c) 2021, Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "pcie-designware.h"
+
+/* PARF registers */
+#define PARF_SYS_CTRL 0x00
+#define PARF_DB_CTRL 0x10
+#define PARF_PM_CTRL 0x20
+#define PARF_MHI_BASE_ADDR_LOWER 0x178
+#define PARF_MHI_BASE_ADDR_UPPER 0x17c
+#define PARF_DEBUG_INT_EN 0x190
+#define PARF_AXI_MSTR_RD_HALT_NO_WRITES 0x1a4
+#define PARF_AXI_MSTR_WR_ADDR_HALT 0x1a8
+#define PARF_Q2A_FLUSH 0x1ac
+#define PARF_LTSSM 0x1b0
+#define PARF_CFG_BITS 0x210
+#define PARF_INT_ALL_STATUS 0x224
+#define PARF_INT_ALL_CLEAR 0x228
+#define PARF_INT_ALL_MASK 0x22c
+#define PARF_SLV_ADDR_MSB_CTRL 0x2c0
+#define PARF_DBI_BASE_ADDR 0x350
+#define PARF_DBI_BASE_ADDR_HI 0x354
+#define PARF_SLV_ADDR_SPACE_SIZE 0x358
+#define PARF_SLV_ADDR_SPACE_SIZE_HI 0x35c
+#define PARF_ATU_BASE_ADDR 0x634
+#define PARF_ATU_BASE_ADDR_HI 0x638
+#define PARF_SRIS_MODE 0x644
+#define PARF_DEVICE_TYPE 0x1000
+#define PARF_BDF_TO_SID_CFG 0x2c00
+
+/* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */
+#define PARF_INT_ALL_LINK_DOWN BIT(1)
+#define PARF_INT_ALL_BME BIT(2)
+#define PARF_INT_ALL_PM_TURNOFF BIT(3)
+#define PARF_INT_ALL_DEBUG BIT(4)
+#define PARF_INT_ALL_LTR BIT(5)
+#define PARF_INT_ALL_MHI_Q6 BIT(6)
+#define PARF_INT_ALL_MHI_A7 BIT(7)
+#define PARF_INT_ALL_DSTATE_CHANGE BIT(8)
+#define PARF_INT_ALL_L1SUB_TIMEOUT BIT(9)
+#define PARF_INT_ALL_MMIO_WRITE BIT(10)
+#define PARF_INT_ALL_CFG_WRITE BIT(11)
+#define PARF_INT_ALL_BRIDGE_FLUSH_N BIT(12)
+#define PARF_INT_ALL_LINK_UP BIT(13)
+#define PARF_INT_ALL_AER_LEGACY BIT(14)
+#define PARF_INT_ALL_PLS_ERR BIT(15)
+#define PARF_INT_ALL_PME_LEGACY BIT(16)
+#define PARF_INT_ALL_PLS_PME BIT(17)
+
+/* PARF_BDF_TO_SID_CFG register fields */
+#define PARF_BDF_TO_SID_BYPASS BIT(0)
+
+/* PARF_DEBUG_INT_EN register fields */
+#define PARF_DEBUG_INT_PM_DSTATE_CHANGE BIT(1)
+#define PARF_DEBUG_INT_CFG_BUS_MASTER_EN BIT(2)
+#define PARF_DEBUG_INT_RADM_PM_TURNOFF BIT(3)
+
+/* PARF_DEVICE_TYPE register fields */
+#define PARF_DEVICE_TYPE_EP 0x0
+
+/* PARF_PM_CTRL register fields */
+#define PARF_PM_CTRL_REQ_EXIT_L1 BIT(1)
+#define PARF_PM_CTRL_READY_ENTR_L23 BIT(2)
+#define PARF_PM_CTRL_REQ_NOT_ENTR_L1 BIT(5)
+
+/* PARF_AXI_MSTR_RD_HALT_NO_WRITES register fields */
+#define PARF_AXI_MSTR_RD_HALT_NO_WRITE_EN BIT(0)
+
+/* PARF_AXI_MSTR_WR_ADDR_HALT register fields */
+#define PARF_AXI_MSTR_WR_ADDR_HALT_EN BIT(31)
+
+/* PARF_Q2A_FLUSH register fields */
+#define PARF_Q2A_FLUSH_EN BIT(16)
+
+/* PARF_SYS_CTRL register fields */
+#define PARF_SYS_CTRL_AUX_PWR_DET BIT(4)
+#define PARF_SYS_CTRL_CORE_CLK_CGC_DIS BIT(6)
+#define PARF_SYS_CTRL_SLV_DBI_WAKE_DISABLE BIT(11)
+
+/* PARF_DB_CTRL register fields */
+#define PARF_DB_CTRL_INSR_DBNCR_BLOCK BIT(0)
+#define PARF_DB_CTRL_RMVL_DBNCR_BLOCK BIT(1)
+#define PARF_DB_CTRL_DBI_WKP_BLOCK BIT(4)
+#define PARF_DB_CTRL_SLV_WKP_BLOCK BIT(5)
+#define PARF_DB_CTRL_MST_WKP_BLOCK BIT(6)
+
+/* PARF_CFG_BITS register fields */
+#define PARF_CFG_BITS_REQ_EXIT_L1SS_MSI_LTR_EN BIT(1)
+
+/* ELBI registers */
+#define ELBI_SYS_STTS 0x08
+
+/* DBI registers */
+#define DBI_CON_STATUS 0x44
+
+/* DBI register fields */
+#define DBI_CON_STATUS_POWER_STATE_MASK GENMASK(1, 0)
+
+#define XMLH_LINK_UP 0x400
+#define CORE_RESET_TIME_US_MIN 1000
+#define CORE_RESET_TIME_US_MAX 1005
+#define WAKE_DELAY_US 2000 /* 2 ms */
+
+#define to_pcie_ep(x) dev_get_drvdata((x)->dev)
+
+enum qcom_pcie_ep_link_status {
+ QCOM_PCIE_EP_LINK_DISABLED,
+ QCOM_PCIE_EP_LINK_ENABLED,
+ QCOM_PCIE_EP_LINK_UP,
+ QCOM_PCIE_EP_LINK_DOWN,
+};
+
+static struct clk_bulk_data qcom_pcie_ep_clks[] = {
+ { .id = "cfg" },
+ { .id = "aux" },
+ { .id = "bus_master" },
+ { .id = "bus_slave" },
+ { .id = "ref" },
+ { .id = "sleep" },
+ { .id = "slave_q2a" },
+};
+
+struct qcom_pcie_ep {
+ struct dw_pcie pci;
+
+ void __iomem *parf;
+ void __iomem *elbi;
+ struct regmap *perst_map;
+ struct resource *mmio_res;
+
+ struct reset_control *core_reset;
+ struct gpio_desc *reset;
+ struct gpio_desc *wake;
+ struct phy *phy;
+
+ u32 perst_en;
+ u32 perst_sep_en;
+
+ enum qcom_pcie_ep_link_status link_status;
+ int global_irq;
+ int perst_irq;
+};
+
+static int qcom_pcie_ep_core_reset(struct qcom_pcie_ep *pcie_ep)
+{
+ struct dw_pcie *pci = &pcie_ep->pci;
+ struct device *dev = pci->dev;
+ int ret;
+
+ ret = reset_control_assert(pcie_ep->core_reset);
+ if (ret) {
+ dev_err(dev, "Cannot assert core reset\n");
+ return ret;
+ }
+
+ usleep_range(CORE_RESET_TIME_US_MIN, CORE_RESET_TIME_US_MAX);
+
+ ret = reset_control_deassert(pcie_ep->core_reset);
+ if (ret) {
+ dev_err(dev, "Cannot de-assert core reset\n");
+ return ret;
+ }
+
+ usleep_range(CORE_RESET_TIME_US_MIN, CORE_RESET_TIME_US_MAX);
+
+ return 0;
+}
+
+/*
+ * Delatch PERST_EN and PERST_SEPARATION_ENABLE with TCSR to avoid
+ * device reset during host reboot and hibernation. The driver is
+ * expected to handle this situation.
+ */
+static void qcom_pcie_ep_configure_tcsr(struct qcom_pcie_ep *pcie_ep)
+{
+ regmap_write(pcie_ep->perst_map, pcie_ep->perst_en, 0);
+ regmap_write(pcie_ep->perst_map, pcie_ep->perst_sep_en, 0);
+}
+
+static int qcom_pcie_dw_link_up(struct dw_pcie *pci)
+{
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+ u32 reg;
+
+ reg = readl_relaxed(pcie_ep->elbi + ELBI_SYS_STTS);
+
+ return reg & XMLH_LINK_UP;
+}
+
+static int qcom_pcie_dw_start_link(struct dw_pcie *pci)
+{
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+
+ enable_irq(pcie_ep->perst_irq);
+
+ return 0;
+}
+
+static void qcom_pcie_dw_stop_link(struct dw_pcie *pci)
+{
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+
+ disable_irq(pcie_ep->perst_irq);
+}
+
+static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
+{
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+ struct device *dev = pci->dev;
+ u32 val, offset;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(qcom_pcie_ep_clks), qcom_pcie_ep_clks);
+ if (ret)
+ return ret;
+
+ ret = qcom_pcie_ep_core_reset(pcie_ep);
+ if (ret)
+ goto err_disable_clk;
+
+ ret = phy_init(pcie_ep->phy);
+ if (ret)
+ goto err_disable_clk;
+
+ ret = phy_power_on(pcie_ep->phy);
+ if (ret)
+ goto err_phy_exit;
+
+ /* Assert WAKE# to RC to indicate device is ready */
+ gpiod_set_value_cansleep(pcie_ep->wake, 1);
+ usleep_range(WAKE_DELAY_US, WAKE_DELAY_US + 500);
+ gpiod_set_value_cansleep(pcie_ep->wake, 0);
+
+ qcom_pcie_ep_configure_tcsr(pcie_ep);
+
+ /* Disable BDF to SID mapping */
+ val = readl_relaxed(pcie_ep->parf + PARF_BDF_TO_SID_CFG);
+ val |= PARF_BDF_TO_SID_BYPASS;
+ writel_relaxed(val, pcie_ep->parf + PARF_BDF_TO_SID_CFG);
+
+ /* Enable debug IRQ */
+ val = readl_relaxed(pcie_ep->parf + PARF_DEBUG_INT_EN);
+ val |= PARF_DEBUG_INT_RADM_PM_TURNOFF | PARF_DEBUG_INT_CFG_BUS_MASTER_EN |
+ PARF_DEBUG_INT_PM_DSTATE_CHANGE;
+ writel_relaxed(val, pcie_ep->parf + PARF_DEBUG_INT_EN);
+
+ /* Configure PCIe to endpoint mode */
+ writel_relaxed(PARF_DEVICE_TYPE_EP, pcie_ep->parf + PARF_DEVICE_TYPE);
+
+ /* Allow entering L1 state */
+ val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
+ val &= ~PARF_PM_CTRL_REQ_NOT_ENTR_L1;
+ writel_relaxed(val, pcie_ep->parf + PARF_PM_CTRL);
+
+ /* Read halts write */
+ val = readl_relaxed(pcie_ep->parf + PARF_AXI_MSTR_RD_HALT_NO_WRITES);
+ val &= ~PARF_AXI_MSTR_RD_HALT_NO_WRITE_EN;
+ writel_relaxed(val, pcie_ep->parf + PARF_AXI_MSTR_RD_HALT_NO_WRITES);
+
+ /* Write after write halt */
+ val = readl_relaxed(pcie_ep->parf + PARF_AXI_MSTR_WR_ADDR_HALT);
+ val |= PARF_AXI_MSTR_WR_ADDR_HALT_EN;
+ writel_relaxed(val, pcie_ep->parf + PARF_AXI_MSTR_WR_ADDR_HALT);
+
+ /* Q2A flush disable */
+ val = readl_relaxed(pcie_ep->parf + PARF_Q2A_FLUSH);
+ val &= ~PARF_Q2A_FLUSH_EN;
+ writel_relaxed(val, pcie_ep->parf + PARF_Q2A_FLUSH);
+
+ /* Disable DBI Wakeup, core clock CGC and enable AUX power */
+ val = readl_relaxed(pcie_ep->parf + PARF_SYS_CTRL);
+ val |= PARF_SYS_CTRL_SLV_DBI_WAKE_DISABLE | PARF_SYS_CTRL_CORE_CLK_CGC_DIS |
+ PARF_SYS_CTRL_AUX_PWR_DET;
+ writel_relaxed(val, pcie_ep->parf + PARF_SYS_CTRL);
+
+ /* Disable the debouncers */
+ val = readl_relaxed(pcie_ep->parf + PARF_DB_CTRL);
+ val |= PARF_DB_CTRL_INSR_DBNCR_BLOCK | PARF_DB_CTRL_RMVL_DBNCR_BLOCK |
+ PARF_DB_CTRL_DBI_WKP_BLOCK | PARF_DB_CTRL_SLV_WKP_BLOCK |
+ PARF_DB_CTRL_MST_WKP_BLOCK;
+ writel_relaxed(val, pcie_ep->parf + PARF_DB_CTRL);
+
+ /* Request to exit from L1SS for MSI and LTR MSG */
+ val = readl_relaxed(pcie_ep->parf + PARF_CFG_BITS);
+ val |= PARF_CFG_BITS_REQ_EXIT_L1SS_MSI_LTR_EN;
+ writel_relaxed(val, pcie_ep->parf + PARF_CFG_BITS);
+
+ dw_pcie_dbi_ro_wr_en(pci);
+
+ /* Set the L0s Exit Latency to 2us-4us = 0x6 */
+ offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+ val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+ val &= ~PCI_EXP_LNKCAP_L0SEL;
+ val |= FIELD_PREP(PCI_EXP_LNKCAP_L0SEL, 0x6);
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, val);
+
+ /* Set the L1 Exit Latency to be 32us-64 us = 0x6 */
+ offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
+ val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+ val &= ~PCI_EXP_LNKCAP_L1EL;
+ val |= FIELD_PREP(PCI_EXP_LNKCAP_L1EL, 0x6);
+ dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, val);
+
+ dw_pcie_dbi_ro_wr_dis(pci);
+
+ writel_relaxed(0, pcie_ep->parf + PARF_INT_ALL_MASK);
+ val = PARF_INT_ALL_LINK_DOWN | PARF_INT_ALL_BME | PARF_INT_ALL_PM_TURNOFF |
+ PARF_INT_ALL_DSTATE_CHANGE | PARF_INT_ALL_LINK_UP;
+ writel_relaxed(val, pcie_ep->parf + PARF_INT_ALL_MASK);
+
+ ret = dw_pcie_ep_init_complete(&pcie_ep->pci.ep);
+ if (ret) {
+ dev_err(dev, "Failed to complete initialization: %d\n", ret);
+ goto err_phy_power_off;
+ }
+
+ /*
+ * The physical address of the MMIO region which is exposed as the BAR
+ * should be written to MHI BASE registers.
+ */
+ writel_relaxed(pcie_ep->mmio_res->start, pcie_ep->parf + PARF_MHI_BASE_ADDR_LOWER);
+ writel_relaxed(0, pcie_ep->parf + PARF_MHI_BASE_ADDR_UPPER);
+
+ dw_pcie_ep_init_notify(&pcie_ep->pci.ep);
+
+ /* Enable LTSSM */
+ val = readl_relaxed(pcie_ep->parf + PARF_LTSSM);
+ val |= BIT(8);
+ writel_relaxed(val, pcie_ep->parf + PARF_LTSSM);
+
+ return 0;
+
+err_phy_power_off:
+ phy_power_off(pcie_ep->phy);
+err_phy_exit:
+ phy_exit(pcie_ep->phy);
+err_disable_clk:
+ clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), qcom_pcie_ep_clks);
+
+ return ret;
+}
+
+static void qcom_pcie_perst_assert(struct dw_pcie *pci)
+{
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+ struct device *dev = pci->dev;
+
+ if (pcie_ep->link_status == QCOM_PCIE_EP_LINK_DISABLED) {
+ dev_dbg(dev, "Link is already disabled\n");
+ return;
+ }
+
+ phy_power_off(pcie_ep->phy);
+ phy_exit(pcie_ep->phy);
+ clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), qcom_pcie_ep_clks);
+ pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED;
+}
+
+/* Common DWC controller ops */
+static const struct dw_pcie_ops pci_ops = {
+ .link_up = qcom_pcie_dw_link_up,
+ .start_link = qcom_pcie_dw_start_link,
+ .stop_link = qcom_pcie_dw_stop_link,
+};
+
+static int qcom_pcie_ep_get_io_resources(struct platform_device *pdev,
+ struct qcom_pcie_ep *pcie_ep)
+{
+ struct device *dev = &pdev->dev;
+ struct dw_pcie *pci = &pcie_ep->pci;
+ struct device_node *syscon;
+ struct resource *res;
+ int ret;
+
+ pcie_ep->parf = devm_platform_ioremap_resource_byname(pdev, "parf");
+ if (IS_ERR(pcie_ep->parf))
+ return PTR_ERR(pcie_ep->parf);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+ pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
+ if (IS_ERR(pci->dbi_base))
+ return PTR_ERR(pci->dbi_base);
+ pci->dbi_base2 = pci->dbi_base;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
+ pcie_ep->elbi = devm_pci_remap_cfg_resource(dev, res);
+ if (IS_ERR(pcie_ep->elbi))
+ return PTR_ERR(pcie_ep->elbi);
+
+ pcie_ep->mmio_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mmio");
+
+ syscon = of_parse_phandle(dev->of_node, "qcom,perst-regs", 0);
+ if (!syscon) {
+ dev_err(dev, "Failed to parse qcom,perst-regs\n");
+ return -EINVAL;
+ }
+
+ pcie_ep->perst_map = syscon_node_to_regmap(syscon);
+ of_node_put(syscon);
+ if (IS_ERR(pcie_ep->perst_map))
+ return PTR_ERR(pcie_ep->perst_map);
+
+ ret = of_property_read_u32_index(dev->of_node, "qcom,perst-regs",
+ 1, &pcie_ep->perst_en);
+ if (ret < 0) {
+ dev_err(dev, "No Perst Enable offset in syscon\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32_index(dev->of_node, "qcom,perst-regs",
+ 2, &pcie_ep->perst_sep_en);
+ if (ret < 0) {
+ dev_err(dev, "No Perst Separation Enable offset in syscon\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int qcom_pcie_ep_get_resources(struct platform_device *pdev,
+ struct qcom_pcie_ep *pcie_ep)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ ret = qcom_pcie_ep_get_io_resources(pdev, pcie_ep);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to get io resources %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_clk_bulk_get(dev, ARRAY_SIZE(qcom_pcie_ep_clks),
+ qcom_pcie_ep_clks);
+ if (ret)
+ return ret;
+
+ pcie_ep->core_reset = devm_reset_control_get_exclusive(dev, "core");
+ if (IS_ERR(pcie_ep->core_reset))
+ return PTR_ERR(pcie_ep->core_reset);
+
+ pcie_ep->reset = devm_gpiod_get(dev, "reset", GPIOD_IN);
+ if (IS_ERR(pcie_ep->reset))
+ return PTR_ERR(pcie_ep->reset);
+
+ pcie_ep->wake = devm_gpiod_get_optional(dev, "wake", GPIOD_OUT_LOW);
+ if (IS_ERR(pcie_ep->wake))
+ return PTR_ERR(pcie_ep->wake);
+
+ pcie_ep->phy = devm_phy_optional_get(&pdev->dev, "pciephy");
+ if (IS_ERR(pcie_ep->phy))
+ ret = PTR_ERR(pcie_ep->phy);
+
+ return ret;
+}
+
+/* TODO: Notify clients about PCIe state change */
+static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
+{
+ struct qcom_pcie_ep *pcie_ep = data;
+ struct dw_pcie *pci = &pcie_ep->pci;
+ struct device *dev = pci->dev;
+ u32 status = readl_relaxed(pcie_ep->parf + PARF_INT_ALL_STATUS);
+ u32 mask = readl_relaxed(pcie_ep->parf + PARF_INT_ALL_MASK);
+ u32 dstate, val;
+
+ writel_relaxed(status, pcie_ep->parf + PARF_INT_ALL_CLEAR);
+ status &= mask;
+
+ if (FIELD_GET(PARF_INT_ALL_LINK_DOWN, status)) {
+ dev_dbg(dev, "Received Linkdown event\n");
+ pcie_ep->link_status = QCOM_PCIE_EP_LINK_DOWN;
+ } else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
+ dev_dbg(dev, "Received BME event. Link is enabled!\n");
+ pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
+ } else if (FIELD_GET(PARF_INT_ALL_PM_TURNOFF, status)) {
+ dev_dbg(dev, "Received PM Turn-off event! Entering L23\n");
+ val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
+ val |= PARF_PM_CTRL_READY_ENTR_L23;
+ writel_relaxed(val, pcie_ep->parf + PARF_PM_CTRL);
+ } else if (FIELD_GET(PARF_INT_ALL_DSTATE_CHANGE, status)) {
+ dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) &
+ DBI_CON_STATUS_POWER_STATE_MASK;
+ dev_dbg(dev, "Received D%d state event\n", dstate);
+ if (dstate == 3) {
+ val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
+ val |= PARF_PM_CTRL_REQ_EXIT_L1;
+ writel_relaxed(val, pcie_ep->parf + PARF_PM_CTRL);
+ }
+ } else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
+ dev_dbg(dev, "Received Linkup event. Enumeration complete!\n");
+ dw_pcie_ep_linkup(&pci->ep);
+ pcie_ep->link_status = QCOM_PCIE_EP_LINK_UP;
+ } else {
+ dev_dbg(dev, "Received unknown event: %d\n", status);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t qcom_pcie_ep_perst_irq_thread(int irq, void *data)
+{
+ struct qcom_pcie_ep *pcie_ep = data;
+ struct dw_pcie *pci = &pcie_ep->pci;
+ struct device *dev = pci->dev;
+ u32 perst;
+
+ perst = gpiod_get_value(pcie_ep->reset);
+ if (perst) {
+ dev_dbg(dev, "PERST asserted by host. Shutting down the PCIe link!\n");
+ qcom_pcie_perst_assert(pci);
+ } else {
+ dev_dbg(dev, "PERST de-asserted by host. Starting link training!\n");
+ qcom_pcie_perst_deassert(pci);
+ }
+
+ irq_set_irq_type(gpiod_to_irq(pcie_ep->reset),
+ (perst ? IRQF_TRIGGER_HIGH : IRQF_TRIGGER_LOW));
+
+ return IRQ_HANDLED;
+}
+
+static int qcom_pcie_ep_enable_irq_resources(struct platform_device *pdev,
+ struct qcom_pcie_ep *pcie_ep)
+{
+ int irq, ret;
+
+ irq = platform_get_irq_byname(pdev, "global");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Failed to get Global IRQ\n");
+ return irq;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ qcom_pcie_ep_global_irq_thread,
+ IRQF_ONESHOT,
+ "global_irq", pcie_ep);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request Global IRQ\n");
+ return ret;
+ }
+
+ pcie_ep->perst_irq = gpiod_to_irq(pcie_ep->reset);
+ irq_set_status_flags(pcie_ep->perst_irq, IRQ_NOAUTOEN);
+ ret = devm_request_threaded_irq(&pdev->dev, pcie_ep->perst_irq, NULL,
+ qcom_pcie_ep_perst_irq_thread,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "perst_irq", pcie_ep);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request PERST IRQ\n");
+ disable_irq(irq);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int qcom_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+ enum pci_epc_irq_type type, u16 interrupt_num)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+ switch (type) {
+ case PCI_EPC_IRQ_LEGACY:
+ return dw_pcie_ep_raise_legacy_irq(ep, func_no);
+ case PCI_EPC_IRQ_MSI:
+ return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+ default:
+ dev_err(pci->dev, "Unknown IRQ type\n");
+ return -EINVAL;
+ }
+}
+
+static const struct pci_epc_features qcom_pcie_epc_features = {
+ .linkup_notifier = true,
+ .core_init_notifier = true,
+ .msi_capable = true,
+ .msix_capable = false,
+};
+
+static const struct pci_epc_features *
+qcom_pcie_epc_get_features(struct dw_pcie_ep *pci_ep)
+{
+ return &qcom_pcie_epc_features;
+}
+
+static void qcom_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ enum pci_barno bar;
+
+ for (bar = BAR_0; bar <= BAR_5; bar++)
+ dw_pcie_ep_reset_bar(pci, bar);
+}
+
+static struct dw_pcie_ep_ops pci_ep_ops = {
+ .ep_init = qcom_pcie_ep_init,
+ .raise_irq = qcom_pcie_ep_raise_irq,
+ .get_features = qcom_pcie_epc_get_features,
+};
+
+static int qcom_pcie_ep_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct qcom_pcie_ep *pcie_ep;
+ int ret;
+
+ pcie_ep = devm_kzalloc(dev, sizeof(*pcie_ep), GFP_KERNEL);
+ if (!pcie_ep)
+ return -ENOMEM;
+
+ pcie_ep->pci.dev = dev;
+ pcie_ep->pci.ops = &pci_ops;
+ pcie_ep->pci.ep.ops = &pci_ep_ops;
+ platform_set_drvdata(pdev, pcie_ep);
+
+ ret = qcom_pcie_ep_get_resources(pdev, pcie_ep);
+ if (ret)
+ return ret;
+
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(qcom_pcie_ep_clks), qcom_pcie_ep_clks);
+ if (ret)
+ return ret;
+
+ ret = qcom_pcie_ep_core_reset(pcie_ep);
+ if (ret)
+ goto err_disable_clk;
+
+ ret = phy_init(pcie_ep->phy);
+ if (ret)
+ goto err_disable_clk;
+
+ /* PHY needs to be powered on for dw_pcie_ep_init() */
+ ret = phy_power_on(pcie_ep->phy);
+ if (ret)
+ goto err_phy_exit;
+
+ ret = dw_pcie_ep_init(&pcie_ep->pci.ep);
+ if (ret) {
+ dev_err(dev, "Failed to initialize endpoint:%d\n", ret);
+ goto err_phy_power_off;
+ }
+
+ ret = qcom_pcie_ep_enable_irq_resources(pdev, pcie_ep);
+ if (ret)
+ goto err_phy_power_off;
+
+ return 0;
+
+err_phy_power_off:
+ phy_power_off(pcie_ep->phy);
+err_phy_exit:
+ phy_exit(pcie_ep->phy);
+err_disable_clk:
+ clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), qcom_pcie_ep_clks);
+
+ return ret;
+}
+
+static int qcom_pcie_ep_remove(struct platform_device *pdev)
+{
+ struct qcom_pcie_ep *pcie_ep = platform_get_drvdata(pdev);
+
+ if (pcie_ep->link_status == QCOM_PCIE_EP_LINK_DISABLED)
+ return 0;
+
+ phy_power_off(pcie_ep->phy);
+ phy_exit(pcie_ep->phy);
+ clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), qcom_pcie_ep_clks);
+
+ return 0;
+}
+
+static const struct of_device_id qcom_pcie_ep_match[] = {
+ { .compatible = "qcom,sdx55-pcie-ep", },
+ { }
+};
+
+static struct platform_driver qcom_pcie_ep_driver = {
+ .probe = qcom_pcie_ep_probe,
+ .remove = qcom_pcie_ep_remove,
+ .driver = {
+ .name = "qcom-pcie-ep",
+ .of_match_table = qcom_pcie_ep_match,
+ },
+};
+builtin_platform_driver(qcom_pcie_ep_driver);
+
+MODULE_AUTHOR("Siddartha Mohanadoss <smohanad@...eaurora.org>");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>");
+MODULE_DESCRIPTION("Qualcomm PCIe Endpoint controller driver");
+MODULE_LICENSE("GPL v2");
--
2.25.1
Powered by blists - more mailing lists