linux-kernel - Re: [RFT PATCH 8/9] usb: typec: tipd: Switch power state to S0 for Apple variant

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 21 Sep 2021 16:46:54 +0300
From:   Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To:     Sven Peter <sven@...npeter.dev>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Guido Günther <agx@...xcpu.org>,
        Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Hector Martin <marcan@...can.st>,
        Mohamed Mediouni <mohamed.mediouni@...amail.com>,
        Stan Skowronek <stan@...ellium.com>,
        Mark Kettenis <mark.kettenis@...all.nl>,
        Alexander Graf <graf@...zon.com>,
        Alyssa Rosenzweig <alyssa@...enzweig.io>
Subject: Re: [RFT PATCH 8/9] usb: typec: tipd: Switch power state to S0 for
 Apple variant

On Sat, Sep 18, 2021 at 02:09:33PM +0200, Sven Peter wrote:
> The Apple CD321x comes up in a low-power state after boot. Usually, the
> bootloader will already power it up to S0 but let's do it here as well
> in case that didn't happen.
> 
> Suggested-by: Stan Skowronek <stan@...ellium.com>
> Signed-off-by: Sven Peter <sven@...npeter.dev>
> ---
>  drivers/usb/typec/tipd/core.c     | 44 +++++++++++++++++++++++++++++++
>  drivers/usb/typec/tipd/tps6598x.h |  6 +++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> index e96b17fe6af6..26807c050662 100644
> --- a/drivers/usb/typec/tipd/core.c
> +++ b/drivers/usb/typec/tipd/core.c
> @@ -30,6 +30,7 @@
>  #define TPS_REG_INT_MASK2		0x17
>  #define TPS_REG_INT_CLEAR1		0x18
>  #define TPS_REG_INT_CLEAR2		0x19
> +#define TPS_REG_SYSTEM_POWER_STATE	0x20
>  #define TPS_REG_STATUS			0x1a
>  #define TPS_REG_SYSTEM_CONF		0x28
>  #define TPS_REG_CTRL_CONF		0x29
> @@ -84,6 +85,8 @@ struct tps6598x_hw {
>  	unsigned int irq_data_status_update;
>  	unsigned int irq_plug_event;
>  	void (*irq_trace)(u64 event1, u64 event2);
> +
> +	bool supports_spss;
>  };
>  static const struct tps6598x_hw ti_tps6598x_data;
>  
> @@ -161,6 +164,11 @@ static int tps6598x_block_write(struct tps6598x *tps, u8 reg,
>  	return regmap_raw_write(tps->regmap, reg, data, sizeof(data));
>  }
>  
> +static inline int tps6598x_read8(struct tps6598x *tps, u8 reg, u8 *val)
> +{
> +	return tps6598x_block_read(tps, reg, val, sizeof(u8));
> +}
> +
>  static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val)
>  {
>  	return tps6598x_block_read(tps, reg, val, sizeof(u16));
> @@ -572,6 +580,35 @@ static int tps6598x_psy_get_prop(struct power_supply *psy,
>  	return ret;
>  }
>  
> +static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state)
> +{
> +	u8 state;
> +	int ret;
> +
> +	if (!tps->hw->supports_spss)
> +		return 0;
> +
> +	ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
> +	if (ret)
> +		return ret;
> +
> +	if (state == target_state)
> +		return 0;
> +
> +	ret = tps6598x_exec_cmd(tps, "SPSS", sizeof(u8), &target_state, 0, NULL);
> +	if (ret)
> +		return ret;
> +
> +	ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
> +	if (ret)
> +		return ret;
> +
> +	if (state != target_state)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  static int devm_tps6598_psy_register(struct tps6598x *tps)
>  {
>  	struct power_supply_config psy_cfg = {};
> @@ -648,6 +685,11 @@ static int tps6598x_probe(struct i2c_client *client)
>  	if (ret)
>  		return ret;
>  
> +	/* Switch Apple chips to the correct system power state */
> +	ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
> +	if (ret)
> +		return ret;

If you call this from the same quirk where you set the mask for your
board, you don't need that supports_spss flag at all, right?

>  	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
>  	if (ret < 0)
>  		return ret;
> @@ -786,6 +828,7 @@ static const struct tps6598x_hw ti_tps6598x_data = {
>  	.irq_data_status_update = TPS_REG_INT_DATA_STATUS_UPDATE,
>  	.irq_plug_event = TPS_REG_INT_PLUG_EVENT,
>  	.irq_trace = trace_tps6598x_irq,
> +	.supports_spss = false,
>  };
>  
>  static const struct tps6598x_hw apple_cd321x_data = {
> @@ -795,6 +838,7 @@ static const struct tps6598x_hw apple_cd321x_data = {
>  	.irq_data_status_update = APPLE_TPS_REG_INT_DATA_STATUS_UPDATE,
>  	.irq_plug_event = APPLE_TPS_REG_INT_PLUG_EVENT,
>  	.irq_trace = trace_cd321x_irq,
> +	.supports_spss = true,
>  };

thanks,

-- 
heikki