[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210922203027.3229474-1-kieran.bingham@ideasonboard.com>
Date: Wed, 22 Sep 2021 21:30:27 +0100
From: Kieran Bingham <kieran.bingham@...asonboard.com>
To: linux-renesas-soc@...r.kernel.org,
Geert Uytterhoeven <geert@...der.be>
Cc: Kieran Bingham <kieran.bingham@...asonboard.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH] arm64: dts: renesas: r8a779a0: falcon-cpu: Add SW46 switch support
Add support for SW46-1 and SW46-2 as switches using the gpio-keys
framework.
Signed-off-by: Kieran Bingham <kieran.bingham@...asonboard.com>
---
SW_LID and SW_DOCK are selected as low-impact switch events for the
default configuration. Would SW_RFKILL_ALL, and SW_MUTE_DEVICE be
preferred as more 'functional' defaults? (I have otherwise avoided these
to hopefully prevent unwanted / undocumented effects occuring on
development hardware running a full interface which may parse these)
I'd expect them to be overridden by any platform using them anyway.
Testing of these switches (and the buttons) shown at:
https://paste.debian.net/1212884/
---
.../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 21 ++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index d595fbad4589..5d188a7d6e73 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -52,6 +52,24 @@ keys {
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
+ sw-1 {
+ gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ label = "SW46-1";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
+ sw-2 {
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_DOCK>;
+ linux,input-type = <EV_SW>;
+ label = "SW46-2";
+ wakeup-source;
+ debounce-interval = <20>;
+ };
+
key-1 {
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
@@ -193,7 +211,8 @@ i2c6_pins: i2c6 {
};
keys_pins: keys {
- pins = "GP_6_18", "GP_6_19", "GP_6_20";
+ pins = "GP_1_28", "GP_1_29",
+ "GP_6_18", "GP_6_19", "GP_6_20";
bias-pull-up;
};
--
2.30.2
Powered by blists - more mailing lists