[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5212d8d7-7e77-b874-8f85-7948c03b5748@samsung.com>
Date: Thu, 23 Sep 2021 07:52:38 +0900
From: Jaehoon Chung <jh80.chung@...sung.com>
To: Christian Löhle <CLoehle@...erstone.com>,
"ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] mmc: dw_mmc: Dont wait for DRTO on Write RSP error
Hi Chritstian,
On 9/16/21 2:59 PM, Christian Löhle wrote:
> Only wait for DRTO on reads, otherwise the driver hangs.
>
> The driver prevents sending CMD12 on response errors like CRCs.
> According to the comment this is because some cards have problems
> with this during the UHS tuning sequence.
> Unfortunately this workaround currently also applies for any command
> with data.
> On reads this will set the drto timer which then triggers after a while.
> On writes this will not set any timer and the tasklet will not be
> scheduled again.
> I cannot attest for the UHS workarounds need, but even if so, it should
> at most apply to reads.
> I have observed many hangs when CMD25 response contained a CRC error.
> This patch fixes this without touching the actual UHS tuning workaround.
Sorry for reply too late. I'm checking your patch on my target.
I will share the result.
Best Regards,
Jaehoon Chung
>
> Signed-off-by: Christian Loehle <cloehle@...erstone.com>
> ---
> drivers/mmc/host/dw_mmc.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 6578cc64ae9e..22cf13dc799b 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2081,7 +2081,8 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
> * delayed. Allowing the transfer to take place
> * avoids races and keeps things simple.
> */
> - if (err != -ETIMEDOUT) {
> + if (err != -ETIMEDOUT &&
> + host->dir_status == DW_MCI_RECV_STATUS) {
> state = STATE_SENDING_DATA;
> continue;
> }
>
Powered by blists - more mailing lists