| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 Sep 2021 10:31:55 +0530
From: <pillair@...eaurora.org>
To: "'Rob Herring'" <robh@...nel.org>,
"'Stephen Boyd'" <swboyd@...omium.org>
Cc: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<mathieu.poirier@...aro.org>, <ohad@...ery.com>,
<p.zabel@...gutronix.de>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<sibis@...eaurora.org>, <mpubbise@...eaurora.org>,
<kuabhs@...omium.org>, "'Rakesh Pillai'" <pillair@....qualcomm.com>
Subject: RE: [PATCH v3 1/3] dt-bindings: remoteproc: qcom: adsp: Convert binding to YAML
> -----Original Message-----
> From: Rob Herring <robh@...nel.org>
> Sent: Wednesday, September 22, 2021 4:59 AM
> To: Stephen Boyd <swboyd@...omium.org>
> Cc: Rakesh Pillai <pillair@...eaurora.org>; agross@...nel.org;
> bjorn.andersson@...aro.org; mathieu.poirier@...aro.org; ohad@...ery.com;
> p.zabel@...gutronix.de; linux-arm-msm@...r.kernel.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org;
> sibis@...eaurora.org; mpubbise@...eaurora.org; kuabhs@...omium.org;
> Rakesh Pillai <pillair@....qualcomm.com>
> Subject: Re: [PATCH v3 1/3] dt-bindings: remoteproc: qcom: adsp: Convert
> binding to YAML
>
> On Thu, Sep 16, 2021 at 11:24:10PM -0700, Stephen Boyd wrote:
> > Quoting Rakesh Pillai (2021-09-16 09:55:51)
> > > diff --git
> > > a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-
> v56.yaml
> > > b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-
> v56.yaml
> > > new file mode 100644
> > > index 0000000..051da43
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-
> v56.
> > > +++ yaml
> > > @@ -0,0 +1,267 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > > +---
> > > +$id:
> > > +http://devicetree.org/schemas/remoteproc/qcom,hexagon-v56.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Qualcomm Hexagon v56 Peripheral Image Loader
> > > +
> > > +maintainers:
> > > + - Bjorn Andersson <bjorn.andersson@...aro.org>
> > > +
> > > +description:
> > > + This document defines the binding for a component that loads and
> > > +boots firmware
> > > + on the Qualcomm Technology Inc. Hexagon v56 core.
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - qcom,qcs404-cdsp-pil
> > > + - qcom,sdm845-adsp-pil
> > > +
> > > + reg:
> > > + maxItems: 1
> > > + description:
> > > + The base address and size of the qdsp6ss register
> > > +
> > > + interrupts-extended:
> > > + minItems: 5
> > > + items:
> > > + - description: Watchdog interrupt
> > > + - description: Fatal interrupt
> > > + - description: Ready interrupt
> > > + - description: Handover interrupt
> > > + - description: Stop acknowledge interrupt
> > > +
> > > + interrupt-names:
> > > + minItems: 5
> > > + items:
> > > + - const: wdog
> > > + - const: fatal
> > > + - const: ready
> > > + - const: handover
> > > + - const: stop-ack
> > > +
> > > + clocks:
> > > + minItems: 7
> > > + maxItems: 8
> > > + description:
> > > + List of phandles and clock specifier pairs for the Hexagon,
> > > + per clock-names below.
> > > +
> > > + clock-names:
> > > + minItems: 7
> > > + maxItems: 8
> > > +
> > > + power-domains:
> > > + minItems: 1
> > > + items:
> > > + - description: CX power domain
> > > +
> > > + resets:
> > > + minItems: 1
> > > + maxItems: 2
> > > + description:
> > > + reference to the list of resets for the Hexagon.
> > > +
> > > + reset-names:
> > > + minItems: 1
> > > + maxItems: 2
> > > +
> > > + memory-region:
> > > + maxItems: 1
> > > + description: Reference to the reserved-memory for the Hexagon
> > > + core
> > > +
> > > + qcom,halt-regs:
> > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > + description:
> > > + Phandle reference to a syscon representing TCSR followed by the
> > > + three offsets within syscon for q6, modem and nc halt
registers.
> > > +
> > > + qcom,smem-states:
> > > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > > + description: States used by the AP to signal the Hexagon core
> > > + items:
> > > + - description: Stop the modem
> > > +
> > > + qcom,smem-state-names:
> > > + $ref: /schemas/types.yaml#/definitions/string-array
> > > + description: The names of the state bits used for SMP2P output
> > > + items:
> > > + - const: stop
> > > +
> > > + glink-edge:
> > > + type: object
> > > + description:
> > > + Qualcomm G-Link subnode which represents communication edge,
> channels
> > > + and devices related to the ADSP.
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - interrupts-extended
> > > + - interrupt-names
> > > + - clocks
> > > + - clock-names
> > > + - power-domains
> > > + - qcom,halt-regs
> > > + - memory-region
> > > + - qcom,smem-states
> > > + - qcom,smem-state-names
> >
> > Is there some way to make sure that 'resets' and 'reset-names' is
> > present when the compatible that defines them is used and not required
> > otherwise?
>
> Yes, plenty of examples of that.
>
> >
> > > +
> > > +additionalProperties: false
> > > +
> > > +allOf:
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + enum:
> > > + - qcom,sdm845-adsp-pil
> > > + then:
> > > + properties:
> > > + clocks:
> > > + items:
> > > + - description: XO clock
> > > + - description: SWAY clock
> > > + - description: LPASS AHBS AON clock
> > > + - description: LPASS AHBM AON clock
> > > + - description: QDSP6SS XO clock
> > > + - description: QDSP6SS SLEEP clock
> > > + - description: QDSP6SS CORE clock
> > > + clock-names:
> > > + items:
> > > + - const: xo
> > > + - const: sway_cbcr
> > > + - const: lpass_ahbs_aon_cbcr
> > > + - const: lpass_ahbm_aon_cbcr
> > > + - const: qdsp6ss_xo
> > > + - const: qdsp6ss_sleep
> > > + - const: qdsp6ss_core
> > > +
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + enum:
> > > + - qcom,qcs404-cdsp-pil
> > > + then:
> > > + properties:
> > > + clocks:
> > > + items:
> > > + - description: XO clock
> > > + - description: SWAY clock
> > > + - description: TBU clock
> > > + - description: BIMC clock
> > > + - description: AHB AON clock
> > > + - description: Q6SS SLAVE clock
> > > + - description: Q6SS MASTER clock
> > > + - description: Q6 AXIM clock
> > > + clock-names:
> > > + items:
> > > + - const: xo
> > > + - const: sway
> > > + - const: tbu
> > > + - const: bimc
> > > + - const: ahb_aon
> > > + - const: q6ss_slave
> > > + - const: q6ss_master
> > > + - const: q6_axim
> > > +
> > > + - if:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + enum:
> > > + - qcom,sc7280-wpss-pil
> >
> > This should be documented above in the compatible list?
> >
> > > + then:
> > > + properties:
> > > + clocks:
> > > + items:
> > > + - description: GCC WPSS AHB BDG Master clock
> > > + - description: GCC WPSS AHB clock
> > > + - description: GCC WPSS RSCP clock
> > > + clock-names:
> > > + items:
> > > + - const: gcc_wpss_ahb_bdg_mst_clk
> > > + - const: gcc_wpss_ahb_clk
> > > + - const: gcc_wpss_rscp_clk
> >
> > Is the 'gcc_wpss' prefix important? It would be shorter if it wasn't
> > there.
>
> Yes, and adding this new platform should be a separate patch.
>
> Rob
Hi Rob,
I have posted v4 for this patch series, where the dt-bindings for wpss has
been moved to a separate file.
Can you please review v4 ?
Thanks,
Rakesh Pillai
Powered by blists - more mailing lists