| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_Jsq+khyhbwJ5-GPZ5ZGkY4nX_obq4t92Z0V6sZH3Oyj4Fow@mail.gmail.com>
Date: Wed, 22 Sep 2021 12:28:41 -0500
From: Rob Herring <robh+dt@...nel.org>
To: Rakesh Pillai <pillair@...eaurora.org>
Cc: "Gross, Andy" <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Ohad Ben-Cohen <ohad@...ery.com>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Stephen Boyd <swboyd@...omium.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
sibis <sibis@...eaurora.org>, mpubbise@...eaurora.org,
kuabhs@...omium.org
Subject: Re: [PATCH v4 1/2] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support
On Fri, Sep 17, 2021 at 5:36 AM Rakesh Pillai <pillair@...eaurora.org> wrote:
>
> Add WPSS PIL loading support for SC7280 SoCs.
>
> Signed-off-by: Rakesh Pillai <pillair@...eaurora.org>
> ---
> .../bindings/remoteproc/qcom,sc7280-wpss-pil.yaml | 198 +++++++++++++++++++++
> 1 file changed, 198 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
What happened to converting the existing binding? Given you already
did that, please don't drop it.
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> new file mode 100644
> index 0000000..896d5f47
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
> @@ -0,0 +1,198 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 WPSS Peripheral Image Loader
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@...aro.org>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. WPSS.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sc7280-wpss-pil
> +
> + reg:
> + maxItems: 1
> + description:
> + The base address and size of the qdsp6ss register
> +
> + interrupts-extended:
Use 'interrupts'. The tooling supports either.
> + minItems: 6
Don't need minItems unless it is less than 'items' length.
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> + - description: Shutdown acknowledge interrupt
> +
> + interrupt-names:
> + minItems: 6
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> + - const: shutdown-ack
> +
> + clocks:
> + minItems: 4
> + items:
> + - description: GCC WPSS AHB BDG Master clock
> + - description: GCC WPSS AHB clock
> + - description: GCC WPSS RSCP clock
> + - description: XO clock
> +
> + clock-names:
> + minItems: 4
> + items:
> + - const: gcc_wpss_ahb_bdg_mst_clk
> + - const: gcc_wpss_ahb_clk
> + - const: gcc_wpss_rscp_clk
ahb_bdg, ahb, rscp is sufficient. Or use the same names as prior
versions (did the h/w clocks change?).
> + - const: xo
> +
> + power-domains:
> + minItems: 2
> + items:
> + - description: CX power domain
> + - description: MX power domain
> +
> + power-domain-names:
> + minItems: 2
> + items:
> + - const: cx
> + - const: mx
> +
> + resets:
> + minItems: 2
> + items:
> + - description: AOSS restart
> + - description: PDC SYNC
> +
> + reset-names:
> + minItems: 2
> + items:
> + - const: restart
> + - const: pdc_sync
> +
> + memory-region:
> + maxItems: 1
> + description: Reference to the reserved-memory for the Hexagon core
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
> +
> + qcom,qmp:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: Reference to the AOSS side-channel message RAM.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string-array
string or string-array?
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
This says only 1 entry, so 'string'.
> +
> + glink-edge:
> + type: object
> + description:
> + Qualcomm G-Link subnode which represents communication edge, channels
> + and devices related to the ADSP.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts-extended
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - power-domain-names
> + - reset
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,qmp
> + - qcom,smem-states
> + - qcom,smem-state-names
> + - glink-edge
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> + #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> + #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> + #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> + #include <dt-bindings/mailbox/qcom-ipcc.h>
> + remoteproc@...0000 {
> + compatible = "qcom,sc7280-wpss-pil";
> + reg = <0x08a00000 0x10000>;
> +
> + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> + "stop-ack", "shutdown-ack";
> +
> + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
> + <&gcc GCC_WPSS_AHB_CLK>,
> + <&gcc GCC_WPSS_RSCP_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "gcc_wpss_ahb_bdg_mst_clk",
> + "gcc_wpss_ahb_clk",
> + "gcc_wpss_rscp_clk",
> + "xo";
> +
> + power-domains = <&rpmhpd SC7280_CX>,
> + <&rpmhpd SC7280_MX>;
> + power-domain-names = "cx", "mx";
> +
> + memory-region = <&wpss_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&wpss_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
> + <&pdc_reset PDC_WPSS_SYNC_RESET>;
> + reset-names = "restart", "pdc_sync";
> +
> + qcom,halt-regs = <&tcsr_mutex 0x37000>;
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_WPSS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + label = "wpss";
> + qcom,remote-pid = <13>;
> + };
> + };
> --
> 2.7.4
>
Powered by blists - more mailing lists