[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210923201804.15733-1-asmaa@nvidia.com>
Date: Thu, 23 Sep 2021 16:18:02 -0400
From: Asmaa Mnebhi <asmaa@...dia.com>
To: andy.shevchenko@...il.com, linux-gpio@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-acpi@...r.kernel.org
Cc: Asmaa Mnebhi <asmaa@...dia.com>, andrew@...n.ch, kuba@...nel.org,
linus.walleij@...aro.org, bgolaszewski@...libre.com,
davem@...emloft.net, rjw@...ysocki.net, davthompson@...dia.com
Subject: [PATCH v3 0/2] gpio: mlxbf2: Introduce proper interrupt handling
This is a follow up on a discussion regarding
proper handling of GPIO interrupts within the
gpio-mlxbf2.c driver.
Link to discussion:
https://lore.kernel.org/netdev/20210816115953.72533-7-andriy.shevchenko@linux.intel.com/T/
Patch 1 adds support to a GPIO IRQ handler in gpio-mlxbf2.c.
Patch 2 is a follow up removal of custom GPIO IRQ handling
from the mlxbf_gige driver and replacing it with a simple
IRQ request. The ACPI table for the mlxbf_gige driver is
responsible for instantiating the PHY GPIO interrupt via
GpioInt.
Andy Shevchenko, could you please review this patch series.
v3 vs. v2 patch:
- Add IRQ_TYPE_LEVEL* back to mlxbf2_gpio_irq_set_type.
YU_GPIO_CAUSE_FALL_EN and YU_GPIO_CAUSE_RISE_EN
are configured in Both level and edge interrupts cases.
Asmaa Mnebhi (2):
gpio: mlxbf2: Introduce IRQ support
net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
drivers/gpio/gpio-mlxbf2.c | 150 ++++++++++++-
.../net/ethernet/mellanox/mlxbf_gige/Makefile | 1 -
.../ethernet/mellanox/mlxbf_gige/mlxbf_gige.h | 12 -
.../mellanox/mlxbf_gige/mlxbf_gige_gpio.c | 212 ------------------
.../mellanox/mlxbf_gige/mlxbf_gige_main.c | 22 +-
5 files changed, 157 insertions(+), 240 deletions(-)
delete mode 100644 drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c
--
2.30.1
Powered by blists - more mailing lists