[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210923065500.2284347-1-daniel@0x0f.com>
Date: Thu, 23 Sep 2021 15:54:49 +0900
From: Daniel Palmer <daniel@...f.com>
To: devicetree@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-leds@...r.kernel.org
Cc: linus.walleij@...aro.org, bgolaszewski@...libre.com,
robh+dt@...nel.org, pavel@....cz,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Daniel Palmer <daniel@...f.com>
Subject: [PATCH v2 00/11] gpio: msc313: Add gpio support for ssd20xd
This is a little series to add a compatible string for the Sigmastar
SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
for the pins on these chips, and then a bunch of DT wiring stuff so
that the LEDs on the M5 stack unitv2 work and it can control the
power switch for the USB connected.
Changes since v1:
- Add a fix for the led binding to squash the warning about the
activity trigger in the unitv2 dts.
- Fix up the regulator node names so they pass dtb check
Daniel Palmer (11):
dt-bindings: gpio: msc313: Add compatible for ssd20xd
dt-bindings: gpio: msc313: Add offsets for ssd20xd
dt-bindings: leds: Document "activity" trigger
gpio: msc313: Code clean ups
gpio: msc313: Add support for SSD201 and SSD202D
ARM: dts: mstar: Set gpio compatible for ssd20xd
ARM: dts: mstar: unitv2: Wire up LEDs
ARM: dts: mstar: unitv2: Add core regulator
ARM: dts: mstar: unitv2: Add io regulator
ARM: dts: mstar: unitv2: Add DRAM regulator
ARM: dts: mstar: unitv2: Add wifi switch
.../bindings/gpio/mstar,msc313-gpio.yaml | 4 +-
.../devicetree/bindings/leds/common.yaml | 2 +
.../dts/mstar-infinity2m-ssd202d-unitv2.dts | 46 +++
.../boot/dts/mstar-infinity2m-ssd20xd.dtsi | 5 +
drivers/gpio/gpio-msc313.c | 266 +++++++++++++++++-
include/dt-bindings/gpio/msc313-gpio.h | 71 +++++
6 files changed, 389 insertions(+), 5 deletions(-)
--
2.33.0
Powered by blists - more mailing lists