lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 23 Sep 2021 16:07:11 +0200 From: Horatiu Vultur <horatiu.vultur@...rochip.com> To: Vladimir Oltean <vladimir.oltean@....com> CC: Xiaoliang Yang <xiaoliang.yang_1@....com>, "davem@...emloft.net" <davem@...emloft.net>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "netdev@...r.kernel.org" <netdev@...r.kernel.org>, "allan.nielsen@...rochip.com" <allan.nielsen@...rochip.com>, "joergen.andreasen@...rochip.com" <joergen.andreasen@...rochip.com>, "UNGLinuxDriver@...rochip.com" <UNGLinuxDriver@...rochip.com>, "vinicius.gomes@...el.com" <vinicius.gomes@...el.com>, "michael.chan@...adcom.com" <michael.chan@...adcom.com>, "vishal@...lsio.com" <vishal@...lsio.com>, "saeedm@...lanox.com" <saeedm@...lanox.com>, "jiri@...lanox.com" <jiri@...lanox.com>, "idosch@...lanox.com" <idosch@...lanox.com>, "alexandre.belloni@...tlin.com" <alexandre.belloni@...tlin.com>, "kuba@...nel.org" <kuba@...nel.org>, Po Liu <po.liu@....com>, Leo Li <leoyang.li@....com>, "f.fainelli@...il.com" <f.fainelli@...il.com>, "andrew@...n.ch" <andrew@...n.ch>, "vivien.didelot@...il.com" <vivien.didelot@...il.com>, Claudiu Manoil <claudiu.manoil@....com> Subject: Re: [PATCH v4 net-next 7/8] net: mscc: ocelot: use index to set vcap policer The 09/23/2021 09:22, Vladimir Oltean wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Thu, Sep 23, 2021 at 09:30:59AM +0200, Horatiu Vultur wrote: > > > In commit commit b596229448dd ("net: mscc: ocelot: Add support for tcam"), Horatiu Vultur define the max number of policers as 383: > > > +#define OCELOT_POLICER_DISCARD 0x17f > > > VCAP IS2 use this policer to set drop action. I did not change this and set the VCAP policers with 128-191 according to the VSC7514 document. > > > > > > I don't know why 383 was used as the maximum value of policer in the original code. Can Microchip people check the code or the documentation for errors? > > > > It was defined as 383 because the HW actually support this number of > > policers. But for this SKU it is recomended to use 191, but no one will > > stop you from using 383. > > So if it is recommended to use 191, why did you use 383? Should Xiaoliang > change that to 191, or leave it alone? I think is better to leave it alone. I am not aware of doing any hard if the value is 383. > > > > > Also, FWIW, Seville has this policer allocation: > > > > > > > > 0 ----+----------------------+ > > > > | Port Policers (11) | > > > > 11 ----+----------------------+ > > > > | VCAP Policers (21) | > > > > 32 ----+----------------------+ > > > > | QoS Policers (88) | > > > > 120 ----+----------------------+ > > > > | VCAP Policers (43) | > > > > 162 ----+----------------------+ > > > > > > I didn't find Seville's document, if this allocation is right, I will add it in Seville driver. > > Strange enough, I don't remember having reports about the VCAP IS2 > policers on Seville not working, and of course being in the common code, > we'd start with a count of 384 policers for that hardware too, and > counting from the end. I think I even tested the policers when adding > the VCAP IS2 constants, and they worked. Is there any sort of index > wraparound that takes place? I don't think there is any wraparound. -- /Horatiu
Powered by blists - more mailing lists