lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <YUyxuIVcjS5h+3cT@robh.at.kernel.org>
Date:   Thu, 23 Sep 2021 11:56:24 -0500
From:   Rob Herring <robh@...nel.org>
To:     Paweł Anikiel <pan@...ihalf.com>
Cc:     miquel.raynal@...tlin.com, richard@....at, vigneshr@...com,
        arnd@...db.de, olof@...om.net, soc@...nel.org, dinguyen@...nel.org,
        p.zabel@...gutronix.de, linux-mtd@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, tn@...ihalf.com,
        ka@...ihalf.com, jam@...ihalf.com,
        Joanna Brozek <jbrozek@...micro.com>,
        Mariusz Glebocki <mglebocki@...micro.com>,
        Tomasz Gorochowik <tgorochowik@...micro.com>,
        Maciej Mikunda <mmikunda@...micro.com>
Subject: Re: [PATCH 2/3] dts: socfpga: Add Mercury+ AA1 devicetree

On Mon, Sep 20, 2021 at 02:41:40PM +0200, Paweł Anikiel wrote:
> Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.
> 
> Signed-off-by: Paweł Anikiel <pan@...ihalf.com>
> Signed-off-by: Joanna Brozek <jbrozek@...micro.com>
> Signed-off-by: Mariusz Glebocki <mglebocki@...micro.com>
> Signed-off-by: Tomasz Gorochowik <tgorochowik@...micro.com>
> Signed-off-by: Maciej Mikunda <mmikunda@...micro.com>
> ---
>  arch/arm/boot/dts/Makefile                    |   1 +
>  .../boot/dts/socfpga_arria10_mercury_aa1.dts  | 127 ++++++++++++++++++
>  2 files changed, 128 insertions(+)
>  create mode 100644 arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7e0934180724..0a7809eb3795 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1078,6 +1078,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
>  	socfpga_arria10_socdk_nand.dtb \
>  	socfpga_arria10_socdk_qspi.dtb \
>  	socfpga_arria10_socdk_sdmmc.dtb \
> +	socfpga_arria10_mercury_aa1.dtb \
>  	socfpga_cyclone5_chameleon96.dtb \
>  	socfpga_cyclone5_mcvevk.dtb \
>  	socfpga_cyclone5_socdk.dtb \
> diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
> new file mode 100644
> index 000000000000..c13f16afa72f
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
> @@ -0,0 +1,127 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/dts-v1/;
> +
> +#include "socfpga_arria10.dtsi"
> +
> +/ {
> +
> +	model = "Enclustra Mercury AA1";
> +	compatible = "altr,socfpga-arria10", "altr,socfpga";
> +
> +	aliases {
> +		ethernet0 = &gmac0;
> +		serial1 = &uart1;
> +	};
> +
> +	memory {

memory@0

> +		name = "memory";
> +		device_type = "memory";
> +		reg = <0x0 0x80000000>; /* 2GB */
> +	};
> +
> +	chosen {
> +		stdout-path = "serial1:115200n8";
> +	};
> +};
> +
> +&osc1 {
> +	clock-frequency = <33330000>;
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +/* Following mappings are taken from arria10 socdk dts */
> +&mmc {
> +	status = "okay";
> +	cap-sd-highspeed;
> +	broken-cd;
> +	bus-width = <4>;
> +};
> +
> +&eccmgr {
> +	sdmmca-ecc@...c2c00 {
> +		compatible = "altr,socfpga-sdmmc-ecc";
> +		reg = <0xff8c2c00 0x400>;
> +		altr,ecc-parent = <&mmc>;
> +		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
> +			     <47 IRQ_TYPE_LEVEL_HIGH>,
> +			     <16 IRQ_TYPE_LEVEL_HIGH>,
> +			     <48 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +};
> +
> +&gmac0 {
> +	phy-mode = "rgmii";
> +	phy-addr = <0xffffffff>; /* probe for phy addr */
> +
> +	max-frame-size = <3800>;
> +	status = "okay";
> +
> +	phy-handle = <&phy3>;
> +
> +	mdio0 {

'mdio' doesn't work?

> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +		phy3: ethernet-phy@3 {
> +			txd0-skew-ps = <0>; /* -420ps */
> +			txd1-skew-ps = <0>; /* -420ps */
> +			txd2-skew-ps = <0>; /* -420ps */
> +			txd3-skew-ps = <0>; /* -420ps */
> +			rxd0-skew-ps = <420>; /* 0ps */
> +			rxd1-skew-ps = <420>; /* 0ps */
> +			rxd2-skew-ps = <420>; /* 0ps */
> +			rxd3-skew-ps = <420>; /* 0ps */
> +			txen-skew-ps = <0>; /* -420ps */
> +			txc-skew-ps = <1860>; /* 960ps */
> +			rxdv-skew-ps = <420>; /* 0ps */
> +			rxc-skew-ps = <1680>; /* 780ps */
> +			reg = <3>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	isl12022: isl12022@6f {
> +		status = "okay";
> +		compatible = "isil,isl12022";
> +		reg = <0x6f>;
> +	};
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&qspi {
> +	status = "disabled";
> +
> +	flash0: n25q00@0 {

flash@0

> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "n25q00";
> +		reg = <0>;
> +		spi-max-frequency = <50000000>;
> +		cdns,page-size = <256>;
> +		cdns,block-size = <16>;
> +		m25p,fast-read;
> +		cdns,read-delay = <4>;
> +		cdns,tshsl-ns = <200>;
> +		cdns,tsd2d-ns = <255>;
> +		cdns,tchsh-ns = <20>;
> +		cdns,tslch-ns = <20>;
> +
> +		part0: qspi-boot@0 {

Put these under a 'partitions' node.

> +			label = "Flash 0 Raw Data";
> +			reg = <0x0 0x01340000>;
> +		};
> +		part1: qspi-rootfs@...0000 {
> +			label = "Flash 1 jffs2 Filesystem";
> +			reg = <0x01340000 0x2cc0000>;
> +		};
> +	};
> +};
> -- 
> 2.25.1
> 
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ