linux-kernel - [PATCH v2 1/2] mmc: sdhci-of-at91: wait for calibration done before proceed

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 24 Sep 2021 11:28:50 +0300
From:   Claudiu Beznea <claudiu.beznea@...rochip.com>
To:     <eugen.hristev@...rochip.com>, <adrian.hunter@...el.com>,
        <ulf.hansson@...aro.org>, <nicolas.ferre@...rochip.com>,
        <alexandre.belloni@...tlin.com>, <ludovic.desroches@...rochip.com>
CC:     <linux-mmc@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH v2 1/2] mmc: sdhci-of-at91: wait for calibration done before proceed

Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN
bit will be cleared. No commands should be send before calibration is
done.

Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten")
Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset")
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---

Hi Nicolas,

I haven't added your tag from previous version as I changed the
implementation to use read_poll_timeout().

Thank you,
Claudiu Beznea

 drivers/mmc/host/sdhci-of-at91.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 5564d7b23e7c..134ba01d3063 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -11,6 +11,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/slot-gpio.h>
@@ -114,6 +115,7 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
+	unsigned int tmp;
 
 	sdhci_reset(host, mask);
 
@@ -126,6 +128,10 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
 
 		sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
 			     SDMMC_CALCR);
+
+		if (read_poll_timeout(sdhci_readl, tmp, !(tmp & SDMMC_CALCR_EN),
+				      10, 20000, false, host, SDMMC_CALCR))
+			dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");
 	}
 }
 
-- 
2.25.1