| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210924083410.12332-8-olivier.moysan@foss.st.com>
Date: Fri, 24 Sep 2021 10:34:10 +0200
From: Olivier Moysan <olivier.moysan@...s.st.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Fabrice Gasnier <fabrice.gasnier@...com>,
Jonathan Cameron <jic23@...nel.org>,
"Lars-Peter Clausen" <lars@...afoo.de>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Olivier Moysan <olivier.moysan@...s.st.com>,
Rob Herring <robh+dt@...nel.org>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-iio@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: [PATCH v3 7/7] iio: adc: stm32-adc: use generic binding for sample-time
Add st,min-sample-time-nsecs to channel generic binding.
Sample time can be defined par channel node. If a channel
is configured as differential, the same sample time applies
for both inputs.
Keep support of legacy st,min-sample-time-nsecs property
for backward compatibility.
Signed-off-by: Olivier Moysan <olivier.moysan@...s.st.com>
---
drivers/iio/adc/stm32-adc.c | 70 ++++++++++++++++++++++---------------
1 file changed, 41 insertions(+), 29 deletions(-)
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index d89115809b37..3f1739b0a7b6 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1809,6 +1809,13 @@ static void stm32_adc_smpr_init(struct stm32_adc *adc, int channel, u32 smp_ns)
u32 period_ns, shift = smpr->shift, mask = smpr->mask;
unsigned int smp, r = smpr->reg;
+ /*
+ * For vrefint channel, ensure that the sampling time cannot
+ * be lower than the one specified in the datasheet
+ */
+ if (channel == adc->int_ch[STM32_ADC_INT_CH_VREFINT])
+ smp_ns = max(smp_ns, adc->cfg->ts_vrefint_ns);
+
/* Determine sampling time (ADC clock cycles) */
period_ns = NSEC_PER_SEC / adc->common->rate;
for (smp = 0; smp <= STM32_ADC_MAX_SMP; smp++)
@@ -1885,6 +1892,13 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
num_channels += ret;
}
+ /* Optional sample time is provided either for each, or all channels */
+ ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
+ if (ret > 1 && ret != num_channels) {
+ dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
+ return -EINVAL;
+ }
+
return num_channels;
}
@@ -1900,6 +1914,7 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
int scan_index = 0, val, ret, i;
struct property *prop;
const __be32 *cur;
+ u32 smp = 0;
if (num_diff) {
ret = of_property_read_u32_array(node, "st,adc-diff-channels",
@@ -1942,6 +1957,19 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
scan_index++;
}
+ for (i = 0; i < scan_index; i++) {
+ /*
+ * Using of_property_read_u32_index(), smp value will only be
+ * modified if valid u32 value can be decoded. This allows to
+ * get either no value, 1 shared value for all indexes, or one
+ * value per channel.
+ */
+ of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
+
+ /* Prepare sampling time settings */
+ stm32_adc_smpr_init(adc, channels[i].channel, smp);
+ }
+
return scan_index;
}
@@ -2034,6 +2062,19 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
vin[1], scan_index, differential);
+
+ ret = of_property_read_u32(child, "st,min-sample-time-nsecs", &val);
+ /* st,min-sample-time-nsecs is optional */
+ if (!ret) {
+ stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
+ if (differential)
+ stm32_adc_smpr_init(adc, vin[1], val);
+ } else if (ret != -EINVAL) {
+ dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs property %d\n",
+ ret);
+ goto err;
+ }
+
scan_index++;
}
@@ -2052,7 +2093,6 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
struct iio_chan_spec *channels;
int scan_index = 0, num_channels = 0, ret, i;
- u32 smp = 0;
bool legacy = false;
for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
@@ -2080,13 +2120,6 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
return -EINVAL;
}
- /* Optional sample time is provided either for each, or all channels */
- ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
- if (ret > 1 && ret != num_channels) {
- dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
- return -EINVAL;
- }
-
if (timestamping)
num_channels++;
@@ -2103,27 +2136,6 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
return ret;
scan_index = ret;
- for (i = 0; i < scan_index; i++) {
- /*
- * Using of_property_read_u32_index(), smp value will only be
- * modified if valid u32 value can be decoded. This allows to
- * get either no value, 1 shared value for all indexes, or one
- * value per channel.
- */
- of_property_read_u32_index(node, "st,min-sample-time-nsecs",
- i, &smp);
-
- /*
- * For vrefint channel, ensure that the sampling time cannot
- * be lower than the one specified in the datasheet
- */
- if (channels[i].channel == adc->int_ch[STM32_ADC_INT_CH_VREFINT])
- smp = max(smp, adc->cfg->ts_vrefint_ns);
-
- /* Prepare sampling time settings */
- stm32_adc_smpr_init(adc, channels[i].channel, smp);
- }
-
if (timestamping) {
struct iio_chan_spec *timestamp = &channels[scan_index];
--
2.17.1
Powered by blists - more mailing lists