[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210924115152.GC2694238@roeck-us.net>
Date: Fri, 24 Sep 2021 04:51:52 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Cc: Rob Herring <robh@...nel.org>, Jean Delvare <jdelvare@...e.com>,
Jiri Kosina <trivial@...nel.org>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>,
linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 6/6] dt-bindings: hwmon: jedec,jc42: add nxp,se97b
On Fri, Sep 24, 2021 at 08:57:44AM +0200, Krzysztof Kozlowski wrote:
> On 23/09/2021 23:16, Rob Herring wrote:
> > On Mon, Sep 20, 2021 at 08:21:14PM +0200, Krzysztof Kozlowski wrote:
> >> Document bindings for NXP SE97B, a DDR memory module temperature sensor
> >> with integrated SPD and EEPROM via Atmel's AT24 interface.
> >>
> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
> >> ---
> >> Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml | 9 +++++++++
> >> 1 file changed, 9 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> >> index a7bb4e3a1c46..0e49b3901161 100644
> >> --- a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> >> +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
> >> @@ -10,6 +10,14 @@ maintainers:
> >> - Jean Delvare <jdelvare@...e.com>
> >> - Guenter Roeck <linux@...ck-us.net>
> >>
> >> +select:
> >> + properties:
> >> + compatible:
> >> + const: jedec,jc-42.4-temp
> >> +
> >> + required:
> >> + - compatible
> >> +
> >
> > Is this supposed to be in the last patch? And why is it needed?
>
> Yes, this is here on purpose because of nxp,se97b which is sensor with
> at24-compatible EEPROM.
>
> arch/arm/boot/dts/at91-nattis-2-natte-2.dts:
> 169 temp@18 {
> 170 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
>
> 171 reg = <0x18>;
> 172 smbus-timeout-disable;
> 173 };
> 174
> 175 eeprom@50 {
> 176 compatible = "nxp,se97b", "atmel,24c02";
How would that be handled anyway ? Yes, the chip includes both a temperature
sensor and an eeprom, but this node should most definitely not instantiate as
temperature sensor.
Guenter
> 177 reg = <0x50>;
> 178 pagesize = <16>;
>
> Without the select, dtbs_check was complaining about the second node:
>
> eeprom@50: compatible: 'oneOf' conditional failed, one must be fixed:
> ['nxp,se97b', 'atmel,24c02'] is too long
> Additional items are not allowed ('atmel,24c02' was unexpected)
> 'jedec,jc-42.4-temp' was expected
> From schema:
> /home/dev/linux/linux/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
>
> eeprom@50: 'pagesize' does not match any of the regexes: 'pinctrl-[0-9]+'
> From schema:
> /home/dev/linux/linux/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
>
>
> >> properties:
> >> compatible:
> >> oneOf:
> >> @@ -31,6 +39,7 @@ properties:
> >> - microchip,mcp98244
> >> - microchip,mcp9843
> >> - nxp,se97
> >> + - nxp,se97b
> >> - nxp,se98
> >> - onnn,cat6095
> >> - onnn,cat34ts02
> >> --
> >> 2.30.2
> >>
> >>
>
>
> Best regards,
> Krzysztof
Powered by blists - more mailing lists