linux-kernel - Re: [PATCH] mmc: sdhci-sprd: Wait until DLL locked after being configured

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <2ba7f698-f16f-0999-53aa-dccb4411de8f@intel.com>
Date:   Fri, 24 Sep 2021 15:30:49 +0300
From:   Adrian Hunter <adrian.hunter@...el.com>
To:     Chunyan Zhang <zhang.lyra@...il.com>,
        Ulf Hansson <ulf.hansson@...aro.org>
Cc:     linux-mmc@...r.kernel.org, Baolin Wang <baolin.wang7@...il.com>,
        Orson Zhai <orsonzhai@...il.com>,
        Chunyan Zhang <chunyan.zhang@...soc.com>,
        zhenxiong.lai@...soc.com, yuelin.tang@...soc.com,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] mmc: sdhci-sprd: Wait until DLL locked after being
 configured

On 23/09/21 11:57 am, Chunyan Zhang wrote:
> From: Zhenxiong Lai <zhenxiong.lai@...soc.com>
> 
> According to the specification, DLL status has to be locked before using it.
> 
> Signed-off-by: Zhenxiong Lai <zhenxiong.lai@...soc.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@...soc.com>
> ---
>  drivers/mmc/host/sdhci-sprd.c | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> index 11e375579cfb..83749c7a6db4 100644
> --- a/drivers/mmc/host/sdhci-sprd.c
> +++ b/drivers/mmc/host/sdhci-sprd.c
> @@ -39,6 +39,9 @@
>  #define  SDHCI_SPRD_BIT_POSRD_DLY_INV		BIT(21)
>  #define  SDHCI_SPRD_BIT_NEGRD_DLY_INV		BIT(29)
>  
> +#define SDHCI_SPRD_REG_32_DLL_STS0	0x210
> +#define SDHCI_SPRD_DLL_LOCKED		BIT(18)
> +
>  #define SDHCI_SPRD_REG_32_BUSY_POSI		0x250
>  #define  SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN	BIT(25)
>  #define  SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN	BIT(24)
> @@ -236,7 +239,7 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host,
>  
>  static void sdhci_sprd_enable_phy_dll(struct sdhci_host *host)
>  {
> -	u32 tmp;
> +	u32 tmp, timeout = 1000;
>  
>  	tmp = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_CFG);
>  	tmp &= ~(SDHCI_SPRD_DLL_EN | SDHCI_SPRD_DLL_ALL_CPST_EN);
> @@ -256,6 +259,21 @@ static void sdhci_sprd_enable_phy_dll(struct sdhci_host *host)
>  	sdhci_writel(host, tmp, SDHCI_SPRD_REG_32_DLL_CFG);
>  	/* wait 1ms */
>  	usleep_range(1000, 1250);
> +
> +	while (--timeout) {
> +		if ((sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_STS0) &
> +		     SDHCI_SPRD_DLL_LOCKED))
> +			break;
> +		usleep_range(1000, 1250);
> +	}
> +
> +	if (!timeout) {

This could use read_poll_timeout() instead e.g.

	if (read_poll_timeout(sdhci_readl, tmp, (tmp & SDHCI_SPRD_DLL_LOCKED),
	    2000, USEC_PER_SEC, false, host, SDHCI_SPRD_REG_32_DLL_STS0)) {




> +		pr_err("%s: DLL locked fail!\n", mmc_hostname(host->mmc));
> +		pr_info("%s: DLL_STS0 : 0x%x, DLL_CFG : 0x%x\n",
> +			 mmc_hostname(host->mmc),
> +			 sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_STS0),
> +			 sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_CFG));
> +	}
>  }
>  
>  static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock)
>