[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210924124333.159067703@linuxfoundation.org>
Date: Fri, 24 Sep 2021 14:44:16 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Petr Oros <poros@...hat.com>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Macpaul Lin <macpaul.lin@...iatek.com>
Subject: [PATCH 5.4 27/50] phy: avoid unnecessary link-up delay in polling mode
From: Petr Oros <poros@...hat.com>
commit e96bd2d3b1f83170d1d5c1a99e439b39a22a5b58 upstream.
commit 93c0970493c71f ("net: phy: consider latched link-down status in
polling mode") removed double-read of latched link-state register for
polling mode from genphy_update_link(). This added extra ~1s delay into
sequence link down->up.
Following scenario:
- After boot link goes up
- phy_start() is called triggering an aneg restart, hence link goes
down and link-down info is latched.
- After aneg has finished link goes up. In phy_state_machine is checked
link state but it is latched "link is down". The state machine is
scheduled after one second and there is detected "link is up". This
extra delay can be avoided when we keep link-state register double read
in case when link was down previously.
With this solution we don't miss a link-down event in polling mode and
link-up is faster.
Details about this quirky behavior on Realtek phy:
Without patch:
T0: aneg is started, link goes down, link-down status is latched
T0+3s: state machine runs, up-to-date link-down is read
T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1),
here i read link-down (BMSR_LSTATUS==0),
T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1),
up-to-date link-up is read (BMSR_LSTATUS==1),
phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING
With patch:
T0: aneg is started, link goes down, link-down status is latched
T0+3s: state machine runs, up-to-date link-down is read
T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1),
first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0,
second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1,
phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING
Signed-off-by: Petr Oros <poros@...hat.com>
Reviewed-by: Heiner Kallweit <hkallweit1@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Cc: Macpaul Lin <macpaul.lin@...iatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/phy/phy-c45.c | 5 +++--
drivers/net/phy/phy_device.c | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -239,9 +239,10 @@ int genphy_c45_read_link(struct phy_devi
/* The link state is latched low so that momentary link
* drops can be detected. Do not double-read the status
- * in polling mode to detect such short link drops.
+ * in polling mode to detect such short link drops except
+ * the link was already down.
*/
- if (!phy_polling_mode(phydev)) {
+ if (!phy_polling_mode(phydev) || !phydev->link) {
val = phy_read_mmd(phydev, devad, MDIO_STAT1);
if (val < 0)
return val;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1766,9 +1766,10 @@ int genphy_update_link(struct phy_device
/* The link state is latched low so that momentary link
* drops can be detected. Do not double-read the status
- * in polling mode to detect such short link drops.
+ * in polling mode to detect such short link drops except
+ * the link was already down.
*/
- if (!phy_polling_mode(phydev)) {
+ if (!phy_polling_mode(phydev) || !phydev->link) {
status = phy_read(phydev, MII_BMSR);
if (status < 0)
return status;
Powered by blists - more mailing lists