lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210925054407.944225-1-y.oudjana@protonmail.com>
Date:   Sat, 25 Sep 2021 05:45:21 +0000
From:   Yassine Oudjana <y.oudjana@...tonmail.com>
To:     MyungJoo Ham <myungjoo.ham@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Yassine Oudjana <y.oudjana@...tonmail.com>,
        Michael Auchter <michael.auchter@...com>,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH v5 0/3] extcon: usbc-tusb320: Initial TUSB320L support

The TUSB320L is a newer chip with additional features. It is close enough to TUSB320 so it works
to some extent out-of-the-box, but for some reason it can start in UFP mode which is not desirable.

This series adds support for reset and mode setting for both chips, and does that while probing
to ensure the chip starts with the default mode of following the PORT pin.

Changes since v4:
 - Use ops struct instead of type enum.
Changes since v3:
 - Remove unused tusb_modes.
 - Remove extra blank line.
Changes since v2:
 - Read state before setting default mode, then update it again after resetting.
 - Remove mode tracing from irq handler
 - Add a delay after reset to handle tSOFT_RESET
 - Use a separate mode setting function for each of TUSB320 and TUSB320L.
Changes since v1:
 - Split first patch into two patches, one adding support for mode setting and reset on TUSB320,
   and the other adding support for TUSB320L.
 - Fix dt_binding_check warning:
   ../Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml:15:6: [warning] wrong indentation: expected 6 but found 5 (indentation)

Yassine Oudjana (3):
  extcon: usbc-tusb320: Add support for mode setting and reset
  extcon: usbc-tusb320: Add support for TUSB320L
  dt-bindings: extcon: usbc-tusb320: Add TUSB320L compatible string

 .../bindings/extcon/extcon-usbc-tusb320.yaml  |   4 +-
 drivers/extcon/extcon-usbc-tusb320.c          | 163 +++++++++++++++++-
 2 files changed, 161 insertions(+), 6 deletions(-)

-- 
2.33.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ