linux-kernel - Re: [v7 00/11] Add support for ast2600 ADC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20210926122734.2fccf55a@jic23-huawei>
Date:   Sun, 26 Sep 2021 12:27:34 +0100
From:   Jonathan Cameron <jic23@...nel.org>
To:     Billy Tsai <billy_tsai@...eedtech.com>
Cc:     <lars@...afoo.de>, <pmeerw@...erw.net>, <robh+dt@...nel.org>,
        <joel@....id.au>, <andrew@...id.au>, <p.zabel@...gutronix.de>,
        <lgirdwood@...il.com>, <broonie@...nel.org>,
        <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-aspeed@...ts.ozlabs.org>, <linux-kernel@...r.kernel.org>,
        <BMC-SW@...eedtech.com>
Subject: Re: [v7 00/11] Add support for ast2600 ADC

On Wed, 22 Sep 2021 16:15:09 +0800
Billy Tsai <billy_tsai@...eedtech.com> wrote:

> This patch serials make aspeed_adc.c can support ast2600 and backward
> compatible.

Hi Billy,

Series applied to the togreg branch of iio.git and pushed out as testing for
0-day to poke at it.

Note the fix for platform_set_drvdata() is in the fixes branch so there will
be a bit of mess around context for patch 1 but that should all resolve in
a trivial fashion.

Thanks,

Jonathan

> 
> Change since v6:
> aspeed_adc.c:
>  - Fix the parameter error for aspeed_adc_unregister_fixed_divider.
> 
> Change since v5:
> aspeed_adc.c:
>   - Use devm_clk_hw_register_divider()
>   - Enabling and setting the ADC to normal mode is a necessary flow, so
>   take it out of the condition.
> 
> Change since v4:
> dt-bindings:
>   - Add clocks maxItems.
>   - Rename the property to meet the property-units.yaml.
>   - Add the description for the difference between adc0 and adc1.
> aspeed_adc.c:
>   - Use new property name to get internal reference voltage: units from mv
>   to uv.
>   - Fix -Wnonnull warning caused by snprintf parameters.
>   - Add suffix mv to the vref parameters.
>   - Use ARRAY_SIZE instead of 32.
>   - Add a reset action for ADC power down and Use devm_iio_device_register.
>   - Fix typo error.
>   - Separate the offset interface of ch7 when battery sensing enable
> 
> Change since v3:
> dt-bindings:
>   - Fix properties:aspeed,int_vref_mv type error.
> 
> Change since v2:
> dt-bindings:
>   - Create a new dt-bindings for ast2600 adc
> aspeed_adc.c:
>   - Splits the patch for more details
>   - Remove version enum and use the flags in model data to distinguish
>   hardware feature
>   - Support trimming data get and set.
>   - Use devm_add_action_or_reset to simplify probe error handling.
> 
> Changes since v1:
> dt-bindings:
>   - Fix the aspeed,adc.yaml check error.
>   - Add battery-sensing property.
> aspeed_adc.c:
>   - Change the init flow:
>     Clock and reference voltage setting should be completed before adc
>     engine enable.
>   - Change the default sampling rate to meet most user case.
>   - Add patch #8 to suppoert battery sensing mode.
> 
> Billy Tsai (11):
>   iio: adc: aspeed: Keep model data to driver data.
>   iio: adc: aspeed: Restructure the model data
>   iio: adc: aspeed: Add vref config function
>   iio: adc: aspeed: Use model_data to set clk scaler.
>   iio: adc: aspeed: Use devm_add_action_or_reset.
>   iio: adc: aspeed: Support ast2600 adc.
>   iio: adc: aspeed: Fix the calculate error of clock.
>   iio: adc: aspeed: Add func to set sampling rate.
>   iio: adc: aspeed: Add compensation phase.
>   iio: adc: aspeed: Support battery sensing.
>   iio: adc: aspeed: Get and set trimming data.
> 
>  drivers/iio/adc/aspeed_adc.c | 554 +++++++++++++++++++++++++++++------
>  1 file changed, 459 insertions(+), 95 deletions(-)
>