[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <e7f228bc-d8d5-5857-a892-df1deee4be3e@collabora.com>
Date: Mon, 27 Sep 2021 13:20:08 +0200
From: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
To: Ezequiel Garcia <ezequiel@...guardiasur.com.ar>
Cc: linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-staging@...ts.linux.dev,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Boris Brezillon <boris.brezillon@...labora.com>,
Fabio Estevam <festevam@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Heiko Stuebner <heiko@...ech.de>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Nicolas Dufresne <nicolas.dufresne@...labora.com>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Philipp Zabel <p.zabel@...gutronix.de>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, kernel@...labora.com,
Ezequiel Garcia <ezequiel@...labora.com>,
Adrian Ratiu <adrian.ratiu@...labora.com>,
Daniel Almeida <daniel.almeida@...labora.com>
Subject: Re: [PATCH v5 05/10] media: uapi: Add VP9 stateless decoder controls
Hi Ezequiel,
Thank you for looking into the patch.
W dniu 24.09.2021 o 18:23, Ezequiel Garcia pisze:
> Hi Andrzej,
>
> On Wed, Sep 22, 2021 at 12:11:41PM +0200, Andrzej Pietrasiewicz wrote:
>> Add the VP9 stateless decoder controls plus the documentation that goes
>> with it.
>>
>> Signed-off-by: Boris Brezillon <boris.brezillon@...labora.com>
>> Co-developed-by: Ezequiel Garcia <ezequiel@...labora.com>
>> Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
>> Signed-off-by: Adrian Ratiu <adrian.ratiu@...labora.com>
>> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
>> Co-developed-by: Daniel Almeida <daniel.almeida@...labora.com>
>> Signed-off-by: Daniel Almeida <daniel.almeida@...labora.com>
>> ---
> [snip]
>> +
>> +#define V4L2_VP9_FRAME_FLAG_KEY_FRAME 0x001
>> +#define V4L2_VP9_FRAME_FLAG_SHOW_FRAME 0x002
>> +#define V4L2_VP9_FRAME_FLAG_ERROR_RESILIENT 0x004
>> +#define V4L2_VP9_FRAME_FLAG_INTRA_ONLY 0x008
>> +#define V4L2_VP9_FRAME_FLAG_ALLOW_HIGH_PREC_MV 0x010
>> +#define V4L2_VP9_FRAME_FLAG_REFRESH_FRAME_CTX 0x020
>> +#define V4L2_VP9_FRAME_FLAG_PARALLEL_DEC_MODE 0x040
>> +#define V4L2_VP9_FRAME_FLAG_X_SUBSAMPLING 0x080
>> +#define V4L2_VP9_FRAME_FLAG_Y_SUBSAMPLING 0x100
>> +#define V4L2_VP9_FRAME_FLAG_COLOR_RANGE_FULL_SWING 0x200
>> +
>> +#define V4L2_VP9_SIGN_BIAS_LAST 0x1
>> +#define V4L2_VP9_SIGN_BIAS_GOLDEN 0x2
>> +#define V4L2_VP9_SIGN_BIAS_ALT 0x4
>> +
>> +#define V4L2_VP9_RESET_FRAME_CTX_NONE 0
>> +#define V4L2_VP9_RESET_FRAME_CTX_SPEC 1
>> +#define V4L2_VP9_RESET_FRAME_CTX_ALL 2
>> +
>> +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP 0
>> +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SMOOTH 1
>> +#define V4L2_VP9_INTERP_FILTER_EIGHTTAP_SHARP 2
>> +#define V4L2_VP9_INTERP_FILTER_BILINEAR 3
>> +#define V4L2_VP9_INTERP_FILTER_SWITCHABLE 4
>> +
>> +#define V4L2_VP9_REFERENCE_MODE_SINGLE_REFERENCE 0
>> +#define V4L2_VP9_REFERENCE_MODE_COMPOUND_REFERENCE 1
>> +#define V4L2_VP9_REFERENCE_MODE_SELECT 2
>> +
>> +#define V4L2_VP9_PROFILE_MAX 3
>> +
>> +#define V4L2_CID_STATELESS_VP9_FRAME (V4L2_CID_CODEC_STATELESS_BASE + 300)
>> +/**
>> + * struct v4l2_ctrl_vp9_frame - VP9 frame decoding control
>> + *
>> + * @lf: loop filter parameters. See &v4l2_vp9_loop_filter for more details
>
> Seems these documentation is missing an ending period for many fields.
Thanks for catching punctuation mistakes :)
>
>> + * @quant: quantization parameters. See &v4l2_vp9_quantization for more details
>> + * @seg: segmentation parameters. See &v4l2_vp9_segmentation for more details
>> + * @flags: combination of V4L2_VP9_FRAME_FLAG_* flags
>> + * @compressed_header_size: compressed header size in bytes
>> + * @uncompressed_header_size: uncompressed header size in bytes
>> + * @frame_width_minus_1: add 1 to it and you'll get the frame width expressed in pixels
>> + * @frame_height_minus_1: add 1 to it and you'll get the frame height expressed in pixels
>> + * @render_width_minus_1: add 1 to it and you'll get the expected render width expressed in
>> + * pixels. This is not used during the decoding process but might be used by HW scalers
>> + * to prepare a frame that's ready for scanout
>> + * @render_height_minus_1: add 1 to it and you'll get the expected render height expressed in
>> + * pixels. This is not used during the decoding process but might be used by HW scalers
>> + * to prepare a frame that's ready for scanout
>> + * @last_frame_ts: "last" reference buffer timestamp.
>> + * The timestamp refers to the timestamp field in struct v4l2_buffer.
>> + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
>> + * @golden_frame_ts: "golden" reference buffer timestamp.
>> + * The timestamp refers to the timestamp field in struct v4l2_buffer.
>> + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
>> + * @alt_frame_ts: "alt" reference buffer timestamp.
>> + * The timestamp refers to the timestamp field in struct v4l2_buffer.
>> + * Use v4l2_timeval_to_ns() to convert the struct timeval to a __u64.
>> + * @ref_frame_sign_bias: a bitfield specifying whether the sign bias is set for a given
>> + * reference frame. Either of V4L2_VP9_SIGN_BIAS_*.
>> + * @reset_frame_context: specifies whether the frame context should be reset to default values.
>> + * Either of V4L2_VP9_RESET_FRAME_CTX_*.
>> + * @frame_context_idx: frame context that should be used/updated
>> + * @profile: VP9 profile. Can be 0, 1, 2 or 3
>> + * @bit_depth: bits per components. Can be 8, 10 or 12. Note that not all profiles support
>> + * 10 and/or 12 bits depths
>> + * @interpolation_filter: specifies the filter selection used for performing inter prediction.
>> + * Either of V4L2_VP9_INTERP_FILTER_*
>> + * @tile_cols_log2: specifies the base 2 logarithm of the width of each tile (where the width
>> + * is measured in units of 8x8 blocks). Shall be less than or equal to 6
>> + * @tile_rows_log2: specifies the base 2 logarithm of the height of each tile (where the height
>> + * is measured in units of 8x8 blocks)
>> + * @reference_mode: specifies the type of inter prediction to be used. See
>
> See what? :-)
>
>> + * Either of V4L2_VP9_REFERENCE_MODE_*
>
> Other controls use V4L2_VP9_REFERENCE_MODE_{}, {} instead of *.
> The same applies to all the documentation.
Will update in v6.
>
>> + * @reserved: padding field. Should be zeroed by applications.
>> + */
>> +struct v4l2_ctrl_vp9_frame {
>> + struct v4l2_vp9_loop_filter lf;
>> + struct v4l2_vp9_quantization quant;
>> + struct v4l2_vp9_segmentation seg;
>> + __u32 flags;
>> + __u16 compressed_header_size;
>> + __u16 uncompressed_header_size;
>> + __u16 frame_width_minus_1;
>> + __u16 frame_height_minus_1;
>> + __u16 render_width_minus_1;
>> + __u16 render_height_minus_1;
>> + __u64 last_frame_ts;
>> + __u64 golden_frame_ts;
>> + __u64 alt_frame_ts;
>> + __u8 ref_frame_sign_bias;
>> + __u8 reset_frame_context;
>> + __u8 frame_context_idx;
>> + __u8 profile;
>> + __u8 bit_depth;
>> + __u8 interpolation_filter;
>> + __u8 tile_cols_log2;
>> + __u8 tile_rows_log2;
>> + __u8 reference_mode;
>> + __u8 reserved[7];
>> +};
>> +
>
> Also, have you checked html and pdf docs and make sure
> it looks as you expect?
>
Yes I did and it looks as I expected.
> Thanks,
> Ezequiel
>
Powered by blists - more mailing lists