[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210927170702.on243lp24fcfdhbj@gilmour>
Date: Mon, 27 Sep 2021 19:07:02 +0200
From: maxime@...no.tech
To: "H. Nikolaus Schaller" <hns@...delico.com>
Cc: Paul Cercueil <paul@...pouillou.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Kees Cook <keescook@...omium.org>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Andrzej Hajda <a.hajda@...sung.com>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
Harry Wentland <harry.wentland@....com>,
Sam Ravnborg <sam@...nborg.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Paul Boddie <paul@...die.org.uk>, devicetree@...r.kernel.org,
linux-mips@...r.kernel.org, linux-kernel@...r.kernel.org,
letux-kernel@...nphoenux.org, Jonas Karlman <jonas@...boo.se>,
dri-devel@...ts.freedesktop.org, Rob Herring <robh@...nel.org>
Subject: Re: [PATCH v4 03/10] dt-bindings: display: Add
ingenic,jz4780-dw-hdmi DT Schema
Hi,
On Mon, Sep 27, 2021 at 06:44:21PM +0200, H. Nikolaus Schaller wrote:
> From: Sam Ravnborg <sam@...nborg.org>
>
> Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
> Based on .txt binding from Zubair Lutfullah Kakakhel
>
> Signed-off-by: Sam Ravnborg <sam@...nborg.org>
> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
> Cc: Rob Herring <robh@...nel.org>
> Cc: devicetree@...r.kernel.org
> ---
> .../bindings/display/ingenic-jz4780-hdmi.yaml | 85 +++++++++++++++++++
> 1 file changed, 85 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> new file mode 100644
> index 000000000000..5e60cdac4f63
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> @@ -0,0 +1,85 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/ingenic-jz4780-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Ingenic JZ4780 HDMI Transmitter
> +
> +maintainers:
> + - H. Nikolaus Schaller <hns@...delico.com>
> +
> +description: |
> + The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
> + TX controller IP with accompanying PHY IP.
> +
> +allOf:
> + - $ref: panel/panel-common.yaml#
Is it a panel though?
> +properties:
> + compatible:
> + items:
> + - const: ingenic,jz4780-dw-hdmi
This can just be a const, there's no need for the items
> +
> + reg:
> + maxItems: 1
> + description: the address & size of the LCD controller registers
There's no need for that description, it's obvious enough
> + reg-io-width:
> + const: 4
If it's fixed, why do you need it in the first place?
> + interrupts:
> + maxItems: 1
> + description: Specifies the interrupt provided by parent
There's no need for that description, it's obvious enough
> + clocks:
> + maxItems: 2
> + description: Clock specifiers for isrf and iahb clocks
This can be defined as
clocks:
items:
- description: isrf
- description: iahb
A better description about what these clocks are would be nice as well
> + clock-names:
> + items:
> + - const: isfr
Is it isfr or isrf?
> + - const: iahb
> +
> + hdmi-regulator: true
> + description: Optional regulator to provide +5V at the connector
regulators need to be suffixed by -supply
You also can just provide the description, you don't need the true there
> + ddc-i2c-bus: true
ditto
> + description: An I2C interface if the internal DDC I2C driver is not to be used
> + ports: true
If there's a single port, you don't need ports
You should also include /schemas/graph.yaml#/$defs/port-base
Maxime
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists