[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210928143413.v3.2.I4e9d93aadb00b1ffc7d506e3186a25492bf0b732@changeid>
Date: Tue, 28 Sep 2021 14:35:50 -0700
From: Brian Norris <briannorris@...omium.org>
To: Heiko Stübner <heiko@...ech.de>
Cc: linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-rockchip@...ts.infradead.org,
Sandy Huang <hjc@...k-chips.com>,
Chen-Yu Tsai <wenst@...omium.org>,
Thomas Hebb <tommyhebb@...il.com>,
Brian Norris <briannorris@...omium.org>, stable@...r.kernel.org
Subject: [PATCH v3 2/4] drm/rockchip: dsi: Reconfigure hardware on resume()
Since commit 43c2de1002d2, we perform most HW configuration in the
bind() function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).
Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <stable@...r.kernel.org>
Signed-off-by: Brian Norris <briannorris@...omium.org>
---
Changes in v3:
- New patch, to fix related PM issue discovered after patch 1
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 45676b23c019..21c67343cc6c 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -268,6 +268,8 @@ struct dw_mipi_dsi_rockchip {
struct dw_mipi_dsi *dmd;
const struct rockchip_dw_dsi_chip_data *cdata;
struct dw_mipi_dsi_plat_data pdata;
+
+ bool dsi_bound;
};
struct dphy_pll_parameter_map {
@@ -964,6 +966,8 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
goto out_pm_runtime;
}
+ dsi->dsi_bound = true;
+
return 0;
out_pm_runtime:
@@ -983,6 +987,8 @@ static void dw_mipi_dsi_rockchip_unbind(struct device *dev,
if (dsi->is_slave)
return;
+ dsi->dsi_bound = false;
+
dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk);
@@ -1277,6 +1283,36 @@ static const struct phy_ops dw_mipi_dsi_dphy_ops = {
.exit = dw_mipi_dsi_dphy_exit,
};
+static int __maybe_unused dw_mipi_dsi_rockchip_resume(struct device *dev)
+{
+ struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
+ int ret;
+
+ /*
+ * Re-configure DSI state, if we were previously initialized. We need
+ * to do this before rockchip_drm_drv tries to re-enable() any panels.
+ */
+ if (dsi->dsi_bound) {
+ ret = clk_prepare_enable(dsi->grf_clk);
+ if (ret) {
+ DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
+ return ret;
+ }
+
+ dw_mipi_dsi_rockchip_config(dsi);
+ if (dsi->slave)
+ dw_mipi_dsi_rockchip_config(dsi->slave);
+
+ clk_disable_unprepare(dsi->grf_clk);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops dw_mipi_dsi_rockchip_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_mipi_dsi_rockchip_resume)
+};
+
static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1594,6 +1630,7 @@ struct platform_driver dw_mipi_dsi_rockchip_driver = {
.remove = dw_mipi_dsi_rockchip_remove,
.driver = {
.of_match_table = dw_mipi_dsi_rockchip_dt_ids,
+ .pm = &dw_mipi_dsi_rockchip_pm_ops,
.name = "dw-mipi-dsi-rockchip",
},
};
--
2.33.0.685.g46640cef36-goog
Powered by blists - more mailing lists