linux-kernel - [PATCH 2/9] mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210928222258.199726-3-miquel.raynal@bootlin.com>
Date:   Wed, 29 Sep 2021 00:22:41 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Richard Weinberger <richard@....at>,
        Vignesh Raghavendra <vigneshr@...com>,
        Tudor Ambarus <Tudor.Ambarus@...rochip.com>
Cc:     <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        stable@...r.kernel.org
Subject: [PATCH 2/9] mtd: rawnand: au1550nd: Keep the driver compatible with on-die ECC engines

Following the introduction of the generic ECC engine infrastructure, it
was necessary to reorganize the code and move the ECC configuration in
the ->attach_chip() hook. Failing to do that properly lead to a first
series of fixes supposed to stabilize the situation. Unfortunately, this
only fixed the use of software ECC engines, preventing any other kind of
engine to be used, including on-die ones.

It is now time to (finally) fix the situation by ensuring that we still
provide a default (eg. software ECC) but will still support different
ECC engines such as on-die ECC engines if properly described in the
device tree.

There are no changes needed on the core side in order to do this, but we
just need to leverage the logic there which allows:
1- a subsystem default (set to Host engines in the raw NAND world)
2- a driver specific default (here set to software ECC engines)
3- any type of engine requested by the user (ie. described in the DT)

As the raw NAND subsystem has not yet been fully converted to the ECC
engine infrastructure, in order to provide a default ECC engine for this
driver we need to set chip->ecc.engine_type *before* calling
nand_scan(). During the initialization step, the core will consider this
entry as the default engine for this driver. This value may of course
be overloaded by the user if the usual DT properties are provided.

Fixes: dbffc8ccdf3a ("mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()")
Cc: stable@...r.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
 drivers/mtd/nand/raw/au1550nd.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index 99116896cfd6..5aa3a06d740c 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -239,9 +239,8 @@ static int au1550nd_exec_op(struct nand_chip *this,

 static int au1550nd_attach_chip(struct nand_chip *chip)
 {
-	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-
-	if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+	    chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
 		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;

 	return 0;
@@ -310,6 +309,13 @@ static int au1550nd_probe(struct platform_device *pdev)
 	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;

+	/*
+	 * This driver assumes that the default ECC engine should be TYPE_SOFT.
+	 * Set ->engine_type before registering the NAND devices in order to
+	 * provide a driver specific default value.
+	 */
+	this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+
 	ret = nand_scan(this, 1);
 	if (ret) {
 		dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
-- 
2.27.0