linux-kernel - [PATCH net-next 2/2] net: pcs: xpcs: fix incorrect CL37 AN sequence

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 28 Sep 2021 12:19:38 +0800
From:   Wong Vee Khee <vee.khee.wong@...ux.intel.com>
To:     Andrew Lunn <andrew@...n.ch>, Jose Abreu <Jose.Abreu@...opsys.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        Vladimir Oltean <vladimir.oltean@....com>,
        Wong Vee Khee <veekhee@...il.com>
Subject: [PATCH net-next 2/2] net: pcs: xpcs: fix incorrect CL37 AN sequence

According to Synopsys DesignWare Cores Ethernet PCS databook, it is
required to disable Clause 37 auto-negotiation by programming bit-12
(AN_ENABLE) to 0 if it is already enabled, before programming various
fields of VR_MII_AN_CTRL registers.

After all these programming are done, it is then required to enable
Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1.

Cc: Vladimir Oltean <vladimir.oltean@....com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@...ux.intel.com>
---
 drivers/net/pcs/pcs-xpcs.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index da8c81d25edd..eacfb32bb229 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -709,11 +709,14 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
 	int ret;
 
 	/* For AN for C37 SGMII mode, the settings are :-
-	 * 1) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
-	 * 2) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
+	 * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
+	      it is already enabled)
+	 * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
+	 * 3) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
 	 *    DW xPCS used with DW EQoS MAC is always MAC side SGMII.
-	 * 3) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
+	 * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
 	 *    speed/duplex mode change by HW after SGMII AN complete)
+	 * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN)
 	 *
 	 * Note: Since it is MAC side SGMII, there is no need to set
 	 *	 SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from
@@ -721,6 +724,11 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
 	 *	 between PHY and Link Partner. There is also no need to
 	 *	 trigger AN restart for MAC-side SGMII.
 	 */
+	ret = xpcs_modify(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, AN_CL37_EN,
+			  0);
+	if (ret < 0)
+		return ret;
+
 	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
 	if (ret < 0)
 		return ret;
@@ -745,7 +753,15 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
 	else
 		ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
 
-	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+	if (ret < 0)
+		return ret;
+	ret |= AN_CL37_EN;
+	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, ret);
 }
 
 static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
-- 
2.25.1