| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210927184858.1.Ib7e63ae17e827ce0636a09d5dec9796043e4f80a@changeid>
Date: Mon, 27 Sep 2021 18:49:39 -0700
From: Philip Chen <philipchen@...omium.org>
To: LKML <linux-kernel@...r.kernel.org>
Cc: dianders@...omium.org, swboyd@...omium.org,
Philip Chen <philipchen@...omium.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org
Subject: [PATCH 1/2] arm64: dts: sc7180: Factor out ti-sn65dsi86 support
Factor out ti-sn65dsi86 edp bridge as a separate dts fragment.
This helps us introduce the second source edp bridge later.
Signed-off-by: Philip Chen <philipchen@...omium.org>
---
.../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 1 +
.../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 1 +
.../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 1 +
.../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 1 +
.../dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 87 +++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 81 -----------------
6 files changed, 91 insertions(+), 81 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index a758e4d22612..1d13fba3bd2f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -11,6 +11,7 @@
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/* Deleted nodes from trogdor.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 00535aaa43c9..27b26a782af9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -11,6 +11,7 @@
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
&ap_sar_sensor {
semtech,cs0-ground;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index a246dbd74cc1..e7c7cad14989 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -11,6 +11,7 @@
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/ {
thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2b522f9e0d8f..457c25499863 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -13,6 +13,7 @@
ap_h1_spi: &spi0 {};
#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
/ {
model = "Google Trogdor (rev1+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
new file mode 100644
index 000000000000..7b1034a5a8e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+&dsi0_out {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&edp_brij_i2c {
+ sn65dsi86_bridge: bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&pp1800_edp_vpll>;
+ vccio-supply = <&pp1800_brij_vccio>;
+ vcca-supply = <&pp1200_brij>;
+ vcc-supply = <&pp1200_brij>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+ clock-names = "refclk";
+
+ no-hpd;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sn65dsi86_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ data-lanes = <0 1>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel: panel {
+ /* Compatible will be filled in per-board */
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&tlmm {
+ edp_brij_irq: edp-brij-irq {
+ pinmux {
+ pins = "gpio11";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio11";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 0f2b3c00e434..5ad3f15652d5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -602,15 +602,6 @@ &camcc {
&dsi0 {
status = "okay";
vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&sn65dsi86_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
};
&dsi_phy {
@@ -621,65 +612,6 @@ &dsi_phy {
edp_brij_i2c: &i2c2 {
status = "okay";
clock-frequency = <400000>;
-
- sn65dsi86_bridge: bridge@2d {
- compatible = "ti,sn65dsi86";
- reg = <0x2d>;
- pinctrl-names = "default";
- pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-
- enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
-
- vpll-supply = <&pp1800_edp_vpll>;
- vccio-supply = <&pp1800_brij_vccio>;
- vcca-supply = <&pp1200_brij>;
- vcc-supply = <&pp1200_brij>;
-
- clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
- clock-names = "refclk";
-
- no-hpd;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- sn65dsi86_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- sn65dsi86_out: endpoint {
- data-lanes = <0 1>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-
- aux-bus {
- panel: panel {
- /* Compatible will be filled in per-board */
- power-supply = <&pp3300_dx_edp>;
- backlight = <&backlight>;
- hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
-
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&sn65dsi86_out>;
- };
- };
- };
- };
- };
};
ap_sar_sensor_i2c: &i2c5 {
@@ -1245,19 +1177,6 @@ pinconf {
};
};
- edp_brij_irq: edp-brij-irq {
- pinmux {
- pins = "gpio11";
- function = "gpio";
- };
-
- pinconf {
- pins = "gpio11";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
en_pp3300_codec: en-pp3300-codec {
pinmux {
pins = "gpio83";
--
2.33.0.685.g46640cef36-goog
Powered by blists - more mailing lists