[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210928022002.26286-1-shawn.guo@linaro.org>
Date: Tue, 28 Sep 2021 10:19:59 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: Vinod Koul <vkoul@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Jeffrey Hugo <jeffrey.l.hugo@...il.com>,
Jami Kettunen <jamipkettunen@...il.com>,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
Shawn Guo <shawn.guo@...aro.org>
Subject: [PATCH v2 0/3] Add missing vdd-supply for QUSB2 PHY
The series adds missing vdd-supply for QUSB2 PHY which is required for
digital circuit. The driver works right now likely because firmware
already sets it up. Add it to bindings, driver and DTS that miss the
supply.
It should not cause problem for existing DTBs:
- SC7180, SDM630, SDM845 based platforms already specified vdd-supply
in the DTBs.
- MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
will ensure QUSB2 PHY driver works as before on these platforms.
Changes for v2:
- Correct copy & paste error on vdd-supply name in bindings doc.
Shawn Guo (3):
dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
phy: qcom-qusb2: Add missing vdd supply
arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY
Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 ++++++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 1 +
arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi | 1 +
drivers/phy/qualcomm/phy-qcom-qusb2.c | 2 +-
6 files changed, 12 insertions(+), 1 deletion(-)
--
2.17.1
Powered by blists - more mailing lists