[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210928133143.157329-32-miquel.raynal@bootlin.com>
Date: Tue, 28 Sep 2021 15:31:26 +0200
From: Miquel Raynal <miquel.raynal@...tlin.com>
To: Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Lee Jones <lee.jones@...aro.org>
Cc: Peter Meerwald-Stadler <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
bcousson@...libre.com, Tony Lindgren <tony@...mide.com>,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-omap@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Vignesh Raghavendra <vigneshr@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Tero Kristo <kristo@...nel.org>,
Ryan Barnett <ryan.barnett@...lins.com>,
Grygorii Strashko <grygorii.strashko@...com>,
Jason Reeder <jreeder@...com>, <linux-kernel@...r.kernel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: [PATCH v4 31/48] mfd: ti_am335x_tscadc: Add TSC prefix in certain macros
While the register list (and names) between ADC0 and ADC1 are pretty
close, the bits inside changed a little bit. To avoid any future
confusion, let's add the TSC prefix when some bits are in a register
that is common to both revisions of the ADC, but are specific to the
am33xx hardware.
Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
---
drivers/mfd/ti_am335x_tscadc.c | 10 +++++-----
include/linux/mfd/ti_am335x_tscadc.h | 14 +++++++-------
2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index a34ca378e82c..ffd52e021c2c 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -222,13 +222,13 @@ static int ti_tscadc_probe(struct platform_device *pdev)
* of the CTRL register but not the subsystem enable bit which must be
* added manually when timely.
*/
- tscadc->ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID;
+ tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
if (tsc_wires > 0) {
- tscadc->ctrl |= CNTRLREG_TSCENB;
+ tscadc->ctrl |= CNTRLREG_TSC_ENB;
if (tsc_wires == 5)
- tscadc->ctrl |= CNTRLREG_5WIRE;
+ tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
else
- tscadc->ctrl |= CNTRLREG_4WIRE;
+ tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
}
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
@@ -328,7 +328,7 @@ static const struct ti_tscadc_data tscdata = {
.adc_feature_compatible = "ti,am3359-adc",
.secondary_feature_name = "TI-am335x-tsc",
.secondary_feature_compatible = "ti,am3359-tsc",
- .target_clk_rate = ADC_CLK,
+ .target_clk_rate = TSC_ADC_CLK,
};
static const struct of_device_id ti_tscadc_dt_ids[] = {
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 860289ae8516..cc6de9258455 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -98,13 +98,13 @@
/* Control register */
#define CNTRLREG_SSENB BIT(0)
#define CNTRLREG_STEPID BIT(1)
-#define CNTRLREG_STEPCONFIGWRT BIT(2)
+#define CNTRLREG_TSC_STEPCONFIGWRT BIT(2)
#define CNTRLREG_POWERDOWN BIT(4)
-#define CNTRLREG_AFE_CTRL(val) FIELD_PREP(GENMASK(6, 5), (val))
-#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1)
-#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2)
-#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3)
-#define CNTRLREG_TSCENB BIT(7)
+#define CNTRLREG_TSC_AFE_CTRL(val) FIELD_PREP(GENMASK(6, 5), (val))
+#define CNTRLREG_TSC_4WIRE CNTRLREG_TSC_AFE_CTRL(1)
+#define CNTRLREG_TSC_5WIRE CNTRLREG_TSC_AFE_CTRL(2)
+#define CNTRLREG_TSC_8WIRE CNTRLREG_TSC_AFE_CTRL(3)
+#define CNTRLREG_TSC_ENB BIT(7)
/* FIFO READ Register */
#define FIFOREAD_DATA_MASK GENMASK(11, 0)
@@ -118,7 +118,7 @@
#define SEQ_STATUS BIT(5)
#define CHARGE_STEP 0x11
-#define ADC_CLK (3 * HZ_PER_MHZ)
+#define TSC_ADC_CLK (3 * HZ_PER_MHZ)
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
#define FIFO1_THRESHOLD 19
--
2.27.0
Powered by blists - more mailing lists