lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 29 Sep 2021 21:21:45 +0530 From: Prasad Malisetty <pmaliset@...eaurora.org> To: Bjorn Helgaas <helgaas@...nel.org> Cc: agross@...nel.org, bjorn.andersson@...aro.org, bhelgaas@...gle.com, robh+dt@...nel.org, swboyd@...omium.org, lorenzo.pieralisi@....com, svarbanov@...sol.com, devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org, linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org, dianders@...omium.org, mka@...omium.org, vbadigan@...eaurora.org, sallenki@...eaurora.org, manivannan.sadhasivam@...aro.org, linux-pci@...r.kernel.org Subject: Re: [PATCH v9 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 On 2021-09-28 21:51, Bjorn Helgaas wrote: > [+cc linux-pci; please cc drivers/pci changes there] Sure Bjorn, I missed to add the lists. I will cc from next release. > > On Tue, Sep 28, 2021 at 07:25:50PM +0530, Prasad Malisetty wrote: >> On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src >> must be the TCXO while gdsc is enabled. After PHY init successful >> clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. > > This looks good. Ideally the commit log would say what the patch > *does*. I know it's in the subject, but it's nice to have it both > places so the body is complete in itself. > > Again in an ideal world, I would split this into two patches: > > 1) Do the boilerplate conversions to struct qcom_pcie_cfg and > updates of qcom_pcie_match[]. This patch would have no functional > change. > > 2) Add the code to deal with pcie_1_pipe_clk_src, which should be a > much smaller patch. > > This makes it easier to see the important part of dealing with > pcie_1_pipe_clk_src and makes any future bisect much more specific. > Hi Bjorn, Thanks for the suggestion. I will split [Patch v9 4/4] patch into two separate changes and update in next version series. Thanks -Prasad >> Signed-off-by: Prasad Malisetty <pmaliset@...eaurora.org> >> Reviewed-by: Stephen Boyd <swboyd@...omium.org> >> --- >> drivers/pci/controller/dwc/pcie-qcom.c | 94 >> ++++++++++++++++++++++++++++++---- >> 1 file changed, 83 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c >> b/drivers/pci/controller/dwc/pcie-qcom.c >> index 8a7a300..7896a86 100644 >> --- a/drivers/pci/controller/dwc/pcie-qcom.c >> +++ b/drivers/pci/controller/dwc/pcie-qcom.c >> @@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 { >> struct regulator_bulk_data supplies[2]; >> struct reset_control *pci_reset; >> struct clk *pipe_clk; >> + struct clk *pipe_clk_src; >> + struct clk *phy_pipe_clk; >> + struct clk *ref_clk_src; >> }; >> >> union qcom_pcie_resources { >> @@ -189,6 +192,11 @@ struct qcom_pcie_ops { >> int (*config_sid)(struct qcom_pcie *pcie); >> }; >> >> +struct qcom_pcie_cfg { >> + const struct qcom_pcie_ops *ops; >> + unsigned int pipe_clk_need_muxing:1; >> +}; >> + >> struct qcom_pcie { >> struct dw_pcie *pci; >> void __iomem *parf; /* DT parf */ >> @@ -197,6 +205,7 @@ struct qcom_pcie { >> struct phy *phy; >> struct gpio_desc *reset; >> const struct qcom_pcie_ops *ops; >> + unsigned int pipe_clk_need_muxing:1; >> }; >> >> #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) >> @@ -1167,6 +1176,20 @@ static int qcom_pcie_get_resources_2_7_0(struct >> qcom_pcie *pcie) >> if (ret < 0) >> return ret; >> >> + if (pcie->pipe_clk_need_muxing) { >> + res->pipe_clk_src = devm_clk_get(dev, "pipe_mux"); >> + if (IS_ERR(res->pipe_clk_src)) >> + return PTR_ERR(res->pipe_clk_src); >> + >> + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); >> + if (IS_ERR(res->phy_pipe_clk)) >> + return PTR_ERR(res->phy_pipe_clk); >> + >> + res->ref_clk_src = devm_clk_get(dev, "ref"); >> + if (IS_ERR(res->ref_clk_src)) >> + return PTR_ERR(res->ref_clk_src); >> + } >> + >> res->pipe_clk = devm_clk_get(dev, "pipe"); >> return PTR_ERR_OR_ZERO(res->pipe_clk); >> } >> @@ -1185,6 +1208,10 @@ static int qcom_pcie_init_2_7_0(struct >> qcom_pcie *pcie) >> return ret; >> } >> >> + /* Set TCXO as clock source for pcie_pipe_clk_src */ >> + if (pcie->pipe_clk_need_muxing) >> + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); >> + >> ret = clk_bulk_prepare_enable(res->num_clks, res->clks); >> if (ret < 0) >> goto err_disable_regulators; >> @@ -1256,6 +1283,10 @@ static int qcom_pcie_post_init_2_7_0(struct >> qcom_pcie *pcie) >> { >> struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; >> >> + /* Set pipe clock as clock source for pcie_pipe_clk_src */ >> + if (pcie->pipe_clk_need_muxing) >> + clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk); >> + >> return clk_prepare_enable(res->pipe_clk); >> } >> >> @@ -1456,6 +1487,39 @@ static const struct qcom_pcie_ops ops_1_9_0 = { >> .config_sid = qcom_pcie_config_sid_sm8250, >> }; >> >> +static const struct qcom_pcie_cfg apq8084_cfg = { >> + .ops = &ops_1_0_0, >> +}; >> + >> +static const struct qcom_pcie_cfg ipq8064_cfg = { >> + .ops = &ops_2_1_0, >> +}; >> + >> +static const struct qcom_pcie_cfg msm8996_cfg = { >> + .ops = &ops_2_3_2, >> +}; >> + >> +static const struct qcom_pcie_cfg ipq8074_cfg = { >> + .ops = &ops_2_3_3, >> +}; >> + >> +static const struct qcom_pcie_cfg ipq4019_cfg = { >> + .ops = &ops_2_4_0, >> +}; >> + >> +static const struct qcom_pcie_cfg sdm845_cfg = { >> + .ops = &ops_2_7_0, >> +}; >> + >> +static const struct qcom_pcie_cfg sm8250_cfg = { >> + .ops = &ops_1_9_0, >> +}; >> + >> +static const struct qcom_pcie_cfg sc7280_cfg = { >> + .ops = &ops_1_9_0, >> + .pipe_clk_need_muxing = true, >> +}; >> + >> static const struct dw_pcie_ops dw_pcie_ops = { >> .link_up = qcom_pcie_link_up, >> .start_link = qcom_pcie_start_link, >> @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> struct pcie_port *pp; >> struct dw_pcie *pci; >> struct qcom_pcie *pcie; >> + const struct qcom_pcie_cfg *pcie_cfg; >> int ret; >> >> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); >> @@ -1488,7 +1553,13 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> >> pcie->pci = pci; >> >> - pcie->ops = of_device_get_match_data(dev); >> + pcie_cfg = of_device_get_match_data(dev); >> + pcie->ops = pcie_cfg->ops; >> + if (!pcie->ops) { >> + dev_err(dev, "Invalid platform data\n"); >> + return -EINVAL; >> + } >> + pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing; >> >> pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); >> if (IS_ERR(pcie->reset)) { >> @@ -1545,16 +1616,17 @@ static int qcom_pcie_probe(struct >> platform_device *pdev) >> } >> >> static const struct of_device_id qcom_pcie_match[] = { >> - { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, >> - { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, >> - { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, >> - { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, >> - { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, >> - { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, >> - { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, >> - { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, >> - { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, >> - { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, >> + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, >> + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, >> + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, >> + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, >> + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, >> + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, >> + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, >> + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, >> + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, >> + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, >> + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, >> { } >> }; >> >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >>
Powered by blists - more mailing lists