| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210929160439.6601-9-andrzej.p@collabora.com>
Date: Wed, 29 Sep 2021 18:04:36 +0200
From: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
To: linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-staging@...ts.linux.dev
Cc: Andrzej Pietrasiewicz <andrzej.p@...labora.com>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Boris Brezillon <boris.brezillon@...labora.com>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Fabio Estevam <festevam@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Heiko Stuebner <heiko@...ech.de>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Nicolas Dufresne <nicolas.dufresne@...labora.com>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Philipp Zabel <p.zabel@...gutronix.de>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, kernel@...labora.com
Subject: [PATCH v7 08/11] media: hantro: Rename registers
Add more consistency in the way registers are named.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
---
.../staging/media/hantro/hantro_g2_hevc_dec.c | 38 +++++++++----------
drivers/staging/media/hantro/hantro_g2_regs.h | 28 +++++++-------
2 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
index 340efb57fd18..97da719a9844 100644
--- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
+++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
@@ -448,9 +448,9 @@ static int set_ref(struct hantro_ctx *ctx)
if (dpb[i].rps == V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR)
dpb_longterm_e |= BIT(V4L2_HEVC_DPB_ENTRIES_NUM_MAX - 1 - i);
- hantro_write_addr(vpu, G2_REG_ADDR_REF(i), luma_addr);
- hantro_write_addr(vpu, G2_REG_CHR_REF(i), chroma_addr);
- hantro_write_addr(vpu, G2_REG_DMV_REF(i), mv_addr);
+ hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), luma_addr);
+ hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), chroma_addr);
+ hantro_write_addr(vpu, G2_REF_MV_ADDR(i), mv_addr);
}
luma_addr = hantro_hevc_get_ref_buf(ctx, decode_params->pic_order_cnt_val);
@@ -460,20 +460,20 @@ static int set_ref(struct hantro_ctx *ctx)
chroma_addr = luma_addr + cr_offset;
mv_addr = luma_addr + mv_offset;
- hantro_write_addr(vpu, G2_REG_ADDR_REF(i), luma_addr);
- hantro_write_addr(vpu, G2_REG_CHR_REF(i), chroma_addr);
- hantro_write_addr(vpu, G2_REG_DMV_REF(i++), mv_addr);
+ hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), luma_addr);
+ hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), chroma_addr);
+ hantro_write_addr(vpu, G2_REF_MV_ADDR(i++), mv_addr);
- hantro_write_addr(vpu, G2_ADDR_DST, luma_addr);
- hantro_write_addr(vpu, G2_ADDR_DST_CHR, chroma_addr);
- hantro_write_addr(vpu, G2_ADDR_DST_MV, mv_addr);
+ hantro_write_addr(vpu, G2_OUT_LUMA_ADDR, luma_addr);
+ hantro_write_addr(vpu, G2_OUT_CHROMA_ADDR, chroma_addr);
+ hantro_write_addr(vpu, G2_OUT_MV_ADDR, mv_addr);
hantro_hevc_ref_remove_unused(ctx);
for (; i < V4L2_HEVC_DPB_ENTRIES_NUM_MAX; i++) {
- hantro_write_addr(vpu, G2_REG_ADDR_REF(i), 0);
- hantro_write_addr(vpu, G2_REG_CHR_REF(i), 0);
- hantro_write_addr(vpu, G2_REG_DMV_REF(i), 0);
+ hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), 0);
+ hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), 0);
+ hantro_write_addr(vpu, G2_REF_MV_ADDR(i), 0);
}
hantro_reg_write(vpu, &g2_refer_lterm_e, dpb_longterm_e);
@@ -499,7 +499,7 @@ static void set_buffers(struct hantro_ctx *ctx)
src_len = vb2_get_plane_payload(&src_buf->vb2_buf, 0);
src_buf_len = vb2_plane_size(&src_buf->vb2_buf, 0);
- hantro_write_addr(vpu, G2_ADDR_STR, src_dma);
+ hantro_write_addr(vpu, G2_STREAM_ADDR, src_dma);
hantro_reg_write(vpu, &g2_stream_len, src_len);
hantro_reg_write(vpu, &g2_strm_buffer_len, src_buf_len);
hantro_reg_write(vpu, &g2_strm_start_offset, 0);
@@ -508,12 +508,12 @@ static void set_buffers(struct hantro_ctx *ctx)
/* Destination (decoded frame) buffer. */
dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
- hantro_write_addr(vpu, G2_RASTER_SCAN, dst_dma);
- hantro_write_addr(vpu, G2_RASTER_SCAN_CHR, dst_dma + cr_offset);
- hantro_write_addr(vpu, G2_ADDR_TILE_SIZE, ctx->hevc_dec.tile_sizes.dma);
- hantro_write_addr(vpu, G2_TILE_FILTER, ctx->hevc_dec.tile_filter.dma);
- hantro_write_addr(vpu, G2_TILE_SAO, ctx->hevc_dec.tile_sao.dma);
- hantro_write_addr(vpu, G2_TILE_BSD, ctx->hevc_dec.tile_bsd.dma);
+ hantro_write_addr(vpu, G2_RS_OUT_LUMA_ADDR, dst_dma);
+ hantro_write_addr(vpu, G2_RS_OUT_CHROMA_ADDR, dst_dma + cr_offset);
+ hantro_write_addr(vpu, G2_TILE_SIZES_ADDR, ctx->hevc_dec.tile_sizes.dma);
+ hantro_write_addr(vpu, G2_TILE_FILTER_ADDR, ctx->hevc_dec.tile_filter.dma);
+ hantro_write_addr(vpu, G2_TILE_SAO_ADDR, ctx->hevc_dec.tile_sao.dma);
+ hantro_write_addr(vpu, G2_TILE_BSD_ADDR, ctx->hevc_dec.tile_bsd.dma);
}
static void hantro_g2_check_idle(struct hantro_dev *vpu)
diff --git a/drivers/staging/media/hantro/hantro_g2_regs.h b/drivers/staging/media/hantro/hantro_g2_regs.h
index bb22fa921914..24b18f839ff8 100644
--- a/drivers/staging/media/hantro/hantro_g2_regs.h
+++ b/drivers/staging/media/hantro/hantro_g2_regs.h
@@ -177,20 +177,20 @@
#define G2_REG_CONFIG_DEC_CLK_GATE_E BIT(16)
#define G2_REG_CONFIG_DEC_CLK_GATE_IDLE_E BIT(17)
-#define G2_ADDR_DST (G2_SWREG(65))
-#define G2_REG_ADDR_REF(i) (G2_SWREG(67) + ((i) * 0x8))
-#define G2_ADDR_DST_CHR (G2_SWREG(99))
-#define G2_REG_CHR_REF(i) (G2_SWREG(101) + ((i) * 0x8))
-#define G2_ADDR_DST_MV (G2_SWREG(133))
-#define G2_REG_DMV_REF(i) (G2_SWREG(135) + ((i) * 0x8))
-#define G2_ADDR_TILE_SIZE (G2_SWREG(167))
-#define G2_ADDR_STR (G2_SWREG(169))
-#define HEVC_SCALING_LIST (G2_SWREG(171))
-#define G2_RASTER_SCAN (G2_SWREG(175))
-#define G2_RASTER_SCAN_CHR (G2_SWREG(177))
-#define G2_TILE_FILTER (G2_SWREG(179))
-#define G2_TILE_SAO (G2_SWREG(181))
-#define G2_TILE_BSD (G2_SWREG(183))
+#define G2_OUT_LUMA_ADDR (G2_SWREG(65))
+#define G2_REF_LUMA_ADDR(i) (G2_SWREG(67) + ((i) * 0x8))
+#define G2_OUT_CHROMA_ADDR (G2_SWREG(99))
+#define G2_REF_CHROMA_ADDR(i) (G2_SWREG(101) + ((i) * 0x8))
+#define G2_OUT_MV_ADDR (G2_SWREG(133))
+#define G2_REF_MV_ADDR(i) (G2_SWREG(135) + ((i) * 0x8))
+#define G2_TILE_SIZES_ADDR (G2_SWREG(167))
+#define G2_STREAM_ADDR (G2_SWREG(169))
+#define G2_HEVC_SCALING_LIST_ADDR (G2_SWREG(171))
+#define G2_RS_OUT_LUMA_ADDR (G2_SWREG(175))
+#define G2_RS_OUT_CHROMA_ADDR (G2_SWREG(177))
+#define G2_TILE_FILTER_ADDR (G2_SWREG(179))
+#define G2_TILE_SAO_ADDR (G2_SWREG(181))
+#define G2_TILE_BSD_ADDR (G2_SWREG(183))
#define g2_strm_buffer_len G2_DEC_REG(258, 0, 0xffffffff)
#define g2_strm_start_offset G2_DEC_REG(259, 0, 0xffffffff)
--
2.17.1
Powered by blists - more mailing lists