| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2a3d7205-ffee-f0b1-8c98-3702882441a0@oracle.com>
Date: Thu, 30 Sep 2021 13:22:19 -0500
From: john.p.donnelly@...cle.com
To: Don Brace <don.brace@...rochip.com>, hch@...radead.org,
martin.petersen@...cle.com, jejb@...ux.vnet.ibm.com,
linux-scsi@...r.kernel.org
Cc: Kevin.Barnett@...rochip.com, scott.teel@...rochip.com,
Justin.Lindley@...rochip.com, scott.benesh@...rochip.com,
gerry.morong@...rochip.com, mahesh.rajashekhara@...rochip.com,
mike.mcgowen@...rochip.com, murthy.bhat@...rochip.com,
balsundar.p@...rochip.com, joseph.szczypek@....com,
jeff@...onical.com, POSWALD@...e.com, mwilck@...e.com,
pmenzel@...gen.mpg.de, linux-kernel@...r.kernel.org
Subject: Re: [smartpqi updates PATCH V2 03/11] smartpqi: capture controller
reason codes
On 9/28/21 6:54 PM, Don Brace wrote:
> From: Murthy Bhat <Murthy.Bhat@...rochip.com>
>
> Store controller reason codes in a controller register for
> debugging purposes.
>
> In some rare cases, the driver can halt the controller.
> - Add in a reason code on why the controller was halted.
> - Store this reason code in a controller register to aid
> in debugging the issue.
>
> Reviewed-by: Scott Benesh <scott.benesh@...rochip.com>
> Reviewed-by: Scott Teel <scott.teel@...rochip.com>
> Reviewed-by: Mike McGowen <mike.mcgowen@...rochip.com>
> Signed-off-by: Murthy Bhat <Murthy.Bhat@...rochip.com>
> Signed-off-by: Don Brace <don.brace@...rochip.com>
Acked-by: John Donnelly <john.p.donnelly@...cle.com>
> ---
> drivers/scsi/smartpqi/smartpqi.h | 25 +++++++++++++++--
> drivers/scsi/smartpqi/smartpqi_init.c | 40 ++++++++++++++++++---------
> drivers/scsi/smartpqi/smartpqi_sis.c | 9 ++++--
> drivers/scsi/smartpqi/smartpqi_sis.h | 3 +-
> 4 files changed, 57 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
> index 70eca203d72f..d66863f8d1cf 100644
> --- a/drivers/scsi/smartpqi/smartpqi.h
> +++ b/drivers/scsi/smartpqi/smartpqi.h
> @@ -82,9 +82,11 @@ struct pqi_ctrl_registers {
> __le32 sis_product_identifier; /* B4h */
> u8 reserved5[0xbc - (0xb4 + sizeof(__le32))];
> __le32 sis_firmware_status; /* BCh */
> - u8 reserved6[0x1000 - (0xbc + sizeof(__le32))];
> + u8 reserved6[0xcc - (0xbc + sizeof(__le32))];
> + __le32 sis_ctrl_shutdown_reason_code; /* CCh */
> + u8 reserved7[0x1000 - (0xcc + sizeof(__le32))];
> __le32 sis_mailbox[8]; /* 1000h */
> - u8 reserved7[0x4000 - (0x1000 + (sizeof(__le32) * 8))];
> + u8 reserved8[0x4000 - (0x1000 + (sizeof(__le32) * 8))];
> /*
> * The PQI spec states that the PQI registers should be at
> * offset 0 from the PCIe BAR 0. However, we can't map
> @@ -102,6 +104,21 @@ struct pqi_ctrl_registers {
>
> #define PQI_DEVICE_REGISTERS_OFFSET 0x4000
>
> +/* shutdown reasons for taking the controller offline */
> +enum pqi_ctrl_shutdown_reason {
> + PQI_IQ_NOT_DRAINED_TIMEOUT = 1,
> + PQI_LUN_RESET_TIMEOUT = 2,
> + PQI_IO_PENDING_POST_LUN_RESET_TIMEOUT = 3,
> + PQI_NO_HEARTBEAT = 4,
> + PQI_FIRMWARE_KERNEL_NOT_UP = 5,
> + PQI_OFA_RESPONSE_TIMEOUT = 6,
> + PQI_INVALID_REQ_ID = 7,
> + PQI_UNMATCHED_REQ_ID = 8,
> + PQI_IO_PI_OUT_OF_RANGE = 9,
> + PQI_EVENT_PI_OUT_OF_RANGE = 10,
> + PQI_UNEXPECTED_IU_TYPE = 11
> +};
> +
> enum pqi_io_path {
> RAID_PATH = 0,
> AIO_PATH = 1
> @@ -850,7 +867,8 @@ struct pqi_config_table_firmware_features {
> #define PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT 14
> #define PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME 15
> #define PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN 16
> -#define PQI_FIRMWARE_FEATURE_MAXIMUM 16
> +#define PQI_FIRMWARE_FEATURE_FW_TRIAGE 17
> +#define PQI_FIRMWARE_FEATURE_MAXIMUM 17
>
> struct pqi_config_table_debug {
> struct pqi_config_table_section_header header;
> @@ -1297,6 +1315,7 @@ struct pqi_ctrl_info {
> u8 raid_iu_timeout_supported : 1;
> u8 tmf_iu_timeout_supported : 1;
> u8 unique_wwid_in_report_phys_lun_supported : 1;
> + u8 firmware_triage_supported : 1;
> u8 enable_r1_writes : 1;
> u8 enable_r5_writes : 1;
> u8 enable_r6_writes : 1;
> diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
> index 5655d240f7a7..b6ac4d607664 100644
> --- a/drivers/scsi/smartpqi/smartpqi_init.c
> +++ b/drivers/scsi/smartpqi/smartpqi_init.c
> @@ -54,7 +54,8 @@ MODULE_DESCRIPTION("Driver for Microchip Smart Family Controller version "
> MODULE_VERSION(DRIVER_VERSION);
> MODULE_LICENSE("GPL");
>
> -static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info);
> +static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info,
> + enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason);
> static void pqi_ctrl_offline_worker(struct work_struct *work);
> static int pqi_scan_scsi_devices(struct pqi_ctrl_info *ctrl_info);
> static void pqi_scan_start(struct Scsi_Host *shost);
> @@ -226,7 +227,7 @@ static inline void pqi_check_ctrl_health(struct pqi_ctrl_info *ctrl_info)
> {
> if (ctrl_info->controller_online)
> if (!sis_is_firmware_running(ctrl_info))
> - pqi_take_ctrl_offline(ctrl_info);
> + pqi_take_ctrl_offline(ctrl_info, PQI_FIRMWARE_KERNEL_NOT_UP);
> }
>
> static inline bool pqi_is_hba_lunid(u8 *scsi3addr)
> @@ -3180,9 +3181,10 @@ static int pqi_interpret_task_management_response(struct pqi_ctrl_info *ctrl_inf
> return rc;
> }
>
> -static inline void pqi_invalid_response(struct pqi_ctrl_info *ctrl_info)
> +static inline void pqi_invalid_response(struct pqi_ctrl_info *ctrl_info,
> + enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
> {
> - pqi_take_ctrl_offline(ctrl_info);
> + pqi_take_ctrl_offline(ctrl_info, ctrl_shutdown_reason);
> }
>
> static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue_group *queue_group)
> @@ -3200,7 +3202,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue
> while (1) {
> oq_pi = readl(queue_group->oq_pi);
> if (oq_pi >= ctrl_info->num_elements_per_oq) {
> - pqi_invalid_response(ctrl_info);
> + pqi_invalid_response(ctrl_info, PQI_IO_PI_OUT_OF_RANGE);
> dev_err(&ctrl_info->pci_dev->dev,
> "I/O interrupt: producer index (%u) out of range (0-%u): consumer index: %u\n",
> oq_pi, ctrl_info->num_elements_per_oq - 1, oq_ci);
> @@ -3215,7 +3217,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue
>
> request_id = get_unaligned_le16(&response->request_id);
> if (request_id >= ctrl_info->max_io_slots) {
> - pqi_invalid_response(ctrl_info);
> + pqi_invalid_response(ctrl_info, PQI_INVALID_REQ_ID);
> dev_err(&ctrl_info->pci_dev->dev,
> "request ID in response (%u) out of range (0-%u): producer index: %u consumer index: %u\n",
> request_id, ctrl_info->max_io_slots - 1, oq_pi, oq_ci);
> @@ -3224,7 +3226,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue
>
> io_request = &ctrl_info->io_request_pool[request_id];
> if (atomic_read(&io_request->refcount) == 0) {
> - pqi_invalid_response(ctrl_info);
> + pqi_invalid_response(ctrl_info, PQI_UNMATCHED_REQ_ID);
> dev_err(&ctrl_info->pci_dev->dev,
> "request ID in response (%u) does not match an outstanding I/O request: producer index: %u consumer index: %u\n",
> request_id, oq_pi, oq_ci);
> @@ -3260,7 +3262,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue
> pqi_process_io_error(response->header.iu_type, io_request);
> break;
> default:
> - pqi_invalid_response(ctrl_info);
> + pqi_invalid_response(ctrl_info, PQI_UNEXPECTED_IU_TYPE);
> dev_err(&ctrl_info->pci_dev->dev,
> "unexpected IU type: 0x%x: producer index: %u consumer index: %u\n",
> response->header.iu_type, oq_pi, oq_ci);
> @@ -3442,7 +3444,7 @@ static void pqi_process_soft_reset(struct pqi_ctrl_info *ctrl_info)
> pqi_ofa_free_host_buffer(ctrl_info);
> pqi_ctrl_ofa_done(ctrl_info);
> pqi_ofa_ctrl_unquiesce(ctrl_info);
> - pqi_take_ctrl_offline(ctrl_info);
> + pqi_take_ctrl_offline(ctrl_info, PQI_OFA_RESPONSE_TIMEOUT);
> break;
> }
> }
> @@ -3567,7 +3569,7 @@ static void pqi_heartbeat_timer_handler(struct timer_list *t)
> dev_err(&ctrl_info->pci_dev->dev,
> "no heartbeat detected - last heartbeat count: %u\n",
> heartbeat_count);
> - pqi_take_ctrl_offline(ctrl_info);
> + pqi_take_ctrl_offline(ctrl_info, PQI_NO_HEARTBEAT);
> return;
> }
> } else {
> @@ -3631,7 +3633,7 @@ static int pqi_process_event_intr(struct pqi_ctrl_info *ctrl_info)
> while (1) {
> oq_pi = readl(event_queue->oq_pi);
> if (oq_pi >= PQI_NUM_EVENT_QUEUE_ELEMENTS) {
> - pqi_invalid_response(ctrl_info);
> + pqi_invalid_response(ctrl_info, PQI_EVENT_PI_OUT_OF_RANGE);
> dev_err(&ctrl_info->pci_dev->dev,
> "event interrupt: producer index (%u) out of range (0-%u): consumer index: %u\n",
> oq_pi, PQI_NUM_EVENT_QUEUE_ELEMENTS - 1, oq_ci);
> @@ -7323,7 +7325,10 @@ static void pqi_ctrl_update_feature_flags(struct pqi_ctrl_info *ctrl_info,
> ctrl_info->unique_wwid_in_report_phys_lun_supported =
> firmware_feature->enabled;
> break;
> + case PQI_FIRMWARE_FEATURE_FW_TRIAGE:
> + ctrl_info->firmware_triage_supported = firmware_feature->enabled;
> pqi_save_fw_triage_setting(ctrl_info, firmware_feature->enabled);
> + break;
> }
>
> pqi_firmware_feature_status(ctrl_info, firmware_feature);
> @@ -7419,6 +7424,11 @@ static struct pqi_firmware_feature pqi_firmware_features[] = {
> .feature_bit = PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN,
> .feature_status = pqi_ctrl_update_feature_flags,
> },
> + {
> + .feature_name = "Firmware Triage",
> + .feature_bit = PQI_FIRMWARE_FEATURE_FW_TRIAGE,
> + .feature_status = pqi_ctrl_update_feature_flags,
> + },
> };
>
> static void pqi_process_firmware_features(
> @@ -7519,6 +7529,7 @@ static void pqi_ctrl_reset_config(struct pqi_ctrl_info *ctrl_info)
> ctrl_info->raid_iu_timeout_supported = false;
> ctrl_info->tmf_iu_timeout_supported = false;
> ctrl_info->unique_wwid_in_report_phys_lun_supported = false;
> + ctrl_info->firmware_triage_supported = false;
> }
>
> static int pqi_process_config_table(struct pqi_ctrl_info *ctrl_info)
> @@ -8459,7 +8470,8 @@ static void pqi_ctrl_offline_worker(struct work_struct *work)
> pqi_take_ctrl_offline_deferred(ctrl_info);
> }
>
> -static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info)
> +static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info,
> + enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
> {
> if (!ctrl_info->controller_online)
> return;
> @@ -8468,7 +8480,7 @@ static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info)
> ctrl_info->pqi_mode_enabled = false;
> pqi_ctrl_block_requests(ctrl_info);
> if (!pqi_disable_ctrl_shutdown)
> - sis_shutdown_ctrl(ctrl_info);
> + sis_shutdown_ctrl(ctrl_info, ctrl_shutdown_reason);
> pci_disable_device(ctrl_info->pci_dev);
> dev_err(&ctrl_info->pci_dev->dev, "controller offline\n");
> schedule_work(&ctrl_info->ctrl_offline_work);
> @@ -9303,6 +9315,8 @@ static void __attribute__((unused)) verify_structures(void)
> sis_product_identifier) != 0xb4);
> BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
> sis_firmware_status) != 0xbc);
> + BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
> + sis_ctrl_shutdown_reason_code) != 0xcc);
> BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
> sis_mailbox) != 0x1000);
> BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
> diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c
> index 8acd3a80f582..d66eb8ea161c 100644
> --- a/drivers/scsi/smartpqi/smartpqi_sis.c
> +++ b/drivers/scsi/smartpqi/smartpqi_sis.c
> @@ -397,14 +397,17 @@ void sis_enable_intx(struct pqi_ctrl_info *ctrl_info)
> sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_INTX);
> }
>
> -void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info)
> +void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info,
> + enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
> {
> if (readl(&ctrl_info->registers->sis_firmware_status) &
> SIS_CTRL_KERNEL_PANIC)
> return;
>
> - writel(SIS_TRIGGER_SHUTDOWN,
> - &ctrl_info->registers->sis_host_to_ctrl_doorbell);
> + if (ctrl_info->firmware_triage_supported)
> + writel(ctrl_shutdown_reason, &ctrl_info->registers->sis_ctrl_shutdown_reason_code);
> +
> + writel(SIS_TRIGGER_SHUTDOWN, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
> }
>
> int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info)
> diff --git a/drivers/scsi/smartpqi/smartpqi_sis.h b/drivers/scsi/smartpqi/smartpqi_sis.h
> index c1db93054c86..bd92ff49f385 100644
> --- a/drivers/scsi/smartpqi/smartpqi_sis.h
> +++ b/drivers/scsi/smartpqi/smartpqi_sis.h
> @@ -21,7 +21,8 @@ int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info);
> int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info);
> void sis_enable_msix(struct pqi_ctrl_info *ctrl_info);
> void sis_enable_intx(struct pqi_ctrl_info *ctrl_info);
> -void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info);
> +void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info,
> + enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason);
> int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info);
> int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);
> void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value);
>
Powered by blists - more mailing lists