[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210930044421.1309538-1-vee.khee.wong@linux.intel.com>
Date: Thu, 30 Sep 2021 12:44:21 +0800
From: Wong Vee Khee <vee.khee.wong@...ux.intel.com>
To: "David S . Miller" <davem@...emloft.net>,
Jose Abreu <Jose.Abreu@...opsys.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Jakub Kicinski <kuba@...nel.org>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Vladimir Oltean <vladimir.oltean@....com>,
Wong Vee Khee <veekhee@...il.com>
Subject: [PATCH net v3 1/1] net: pcs: xpcs: fix incorrect CL37 AN sequence
According to Synopsys DesignWare Cores Ethernet PCS databook, it is
required to disable Clause 37 auto-negotiation by programming bit-12
(AN_ENABLE) to 0 if it is already enabled, before programming various
fields of VR_MII_AN_CTRL registers.
After all these programming are done, it is then required to enable
Clause 37 auto-negotiation by programming bit-12 (AN_ENABLE) to 1.
Fixes: b97b5331b8ab ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Cc: Vladimir Oltean <vladimir.oltean@....com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@...ux.intel.com>
---
v2 -> v3:
- Added error handling after xpcs_write().
- Added 'changed' flag.
- Added fixes tag.
v1 -> v2:
- Removed use of xpcs_modify() helper function.
- Add conditional check on inband auto-negotiation.
---
drivers/net/pcs/pcs-xpcs.c | 41 +++++++++++++++++++++++++++++++++-----
1 file changed, 36 insertions(+), 5 deletions(-)
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index fb0a83dc09ac..d2126f5d5016 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -697,14 +697,18 @@ EXPORT_SYMBOL_GPL(xpcs_config_eee);
static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
{
- int ret;
+ int ret, reg_val;
+ int changed = 0;
/* For AN for C37 SGMII mode, the settings are :-
- * 1) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
- * 2) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
+ * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
+ it is already enabled)
+ * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
+ * 3) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
* DW xPCS used with DW EQoS MAC is always MAC side SGMII.
- * 3) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
+ * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
* speed/duplex mode change by HW after SGMII AN complete)
+ * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN)
*
* Note: Since it is MAC side SGMII, there is no need to set
* SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from
@@ -712,6 +716,19 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
* between PHY and Link Partner. There is also no need to
* trigger AN restart for MAC-side SGMII.
*/
+ ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+ if (ret < 0)
+ return ret;
+
+ if (ret & AN_CL37_EN) {
+ changed = 1;
+ reg_val = ret & ~AN_CL37_EN;
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ reg_val);
+ if (ret < 0)
+ return ret;
+ }
+
ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
if (ret < 0)
return ret;
@@ -736,7 +753,21 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
else
ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
- return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+ if (ret < 0)
+ return ret;
+
+ if (changed) {
+ if (phylink_autoneg_inband(mode))
+ reg_val |= AN_CL37_EN;
+ else
+ reg_val &= ~AN_CL37_EN;
+
+ return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ reg_val);
+ }
+
+ return ret;
}
static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
--
2.25.1
Powered by blists - more mailing lists