| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a01be64e31fbeb910b237ce8b8031fe20f245c7e.camel@puri.sm>
Date: Thu, 30 Sep 2021 10:03:46 +0200
From: Martin Kepplinger <martin.kepplinger@...i.sm>
To: Abel Vesa <abel.vesa@....com>
Cc: a.fatoum@...gutronix.de, adrian.hunter@...el.com,
aisheng.dong@....com, catalin.marinas@....com,
cw00.choi@...sung.com, devicetree@...r.kernel.org,
djakov@...nel.org, festevam@...il.com, kernel@...gutronix.de,
kyungmin.park@...sung.com, linux-arm-kernel@...ts.infradead.org,
linux-imx@....com, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-serial@...r.kernel.org,
myungjoo.ham@...sung.com, robh@...nel.org, s.hauer@...gutronix.de,
shawnguo@...nel.org, ulf.hansson@...aro.org, will.deacon@....com
Subject: Re: [RFC 00/19] Add interconnect and devfreq support for i.MX8MQ
Am Mittwoch, dem 29.09.2021 um 14:44 +0300 schrieb Abel Vesa:
> On 21-09-24 12:20:26, Martin Kepplinger wrote:
> > hi Abel,
> >
> > thank you for the update (this is actually v2 of this RFC right?)!
> >
> > all in all this runs fine on the imx8mq (Librem 5 and devkit) I
> > use. For all
> > the pl301 nodes I'm not yet sure what I can actually test / switch
> > frequencies.
> >
>
> You can start by looking into each of the following:
>
> $ ls -1d /sys/devices/platform/soc@.../devfreq/*/trans_stat
>
> and look if the transitions happen when a specific driver that is a
> icc user suspends.
>
> You can also look at:
>
> /sys/kernel/debug/interconnect/interconnect_summary
>
> and:
>
> /sys/kernel/debug/interconnect/interconnect_graph
>
> > But I still have one problem: lcdif/mxfb already has the
> > interconnect dram
> > DT property and I use the following call to request bandwidth:
> > https://source.puri.sm/martin.kepplinger/linux-next/-/commit/d690e4c021293f938eb2253607f92f5a64f15688
> > (mainlining this is on our todo list).
> >
> > With your patchset, I get:
> >
> > [ 0.792960] genirq: Flags mismatch irq 30. 00000004 (mxsfb-drm)
> > vs. 00000004 (mxsfb-drm)
> > [ 0.801143] mxsfb 30320000.lcd-controller: Failed to install IRQ
> > handler
> > [ 0.808058] mxsfb: probe of 30320000.lcd-controller failed with
> > error -16
> >
> > so the main devfreq user (mxsfb) is not there :) why?
> >
>
> OK, I admit, this patchset doesn't provide support for all the icc
> consumer drivers.
> But that should come at a later stage. I only provided example like
> fec and usdhc, to show
> how it all fits together.
>
> > and when I remove the interconnect property from the lcdif DT node,
> > mxsfb
> > probes again, but of course it doesn't lower dram freq as needed.
> >
> > Do I do the icc calls wrong in mxsfb despite it working without
> > your
> > patchset, or may there be something wrong on your side that breaks
> > the mxsfb IRQ?
> >
>
> Do you have the following changes into your tree?
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 00dd8e39a595..c43a84622af5
> 100644
>
> ---
> a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>
> +++
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
>
> @@ -524,7 +524,7 @@ lcdif: lcd-controller@...20000
> {
> <&clk
> IMX8MQ_VIDEO_PLL1>,
> <&clk
> IMX8MQ_VIDEO_PLL1_OUT>;
> assigned-clock-rates = <0>, <0>, <0>,
> <594000000>;
> - interconnects = <&noc
> IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
> + interconnects = <&icc
> IMX8MQ_ICM_LCDIF &icc IMX8MQ_ICS_DRAM>;
> interconnect-names =
> "dram";
> status =
> "disabled";
>
>
>
> @@ -1117,7 +1117,7 @@ mipi_csi1: csi@...70000
> {
> <&src
> IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
> <&src
> IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
> fsl,mipi-phy-gpr = <&iomuxc_gpr
> 0x88>;
> - interconnects = <&noc IMX8MQ_ICM_CSI1
> &noc IMX8MQ_ICS_DRAM>;
> + interconnects = <&icc IMX8MQ_ICM_CSI1
> &icc IMX8MQ_ICS_DRAM>;
> interconnect-names =
> "dram";
> status =
> "disabled";
>
>
>
> @@ -1169,7 +1169,7 @@ mipi_csi2: csi@...60000
> {
> <&src
> IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
> <&src
> IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
> fsl,mipi-phy-gpr = <&iomuxc_gpr
> 0xa4>;
> - interconnects = <&noc IMX8MQ_ICM_CSI2
> &noc IMX8MQ_ICS_DRAM>;
> + interconnects = <&icc IMX8MQ_ICM_CSI2
> &icc IMX8MQ_ICS_DRAM>;
> interconnect-names =
> "dram";
> status =
> "disabled";
>
>
> I forgot to update these in the current version of the patchset. Will
> do in the next version.
>
> Also, would help a lot if you could give me a link to a tree you're
> testing with.
> That way I can look exactly at what's going on.
>
>
thanks Abel, with the above fix of existing interconnects properties my
system runs as expected and here's the output of
for each in `ls -1d /sys/devices/platform/soc@.../devfreq/*`; do echo
$each; cat $each/trans_stat; done
for mxsfb requesting (max) bandwith (display on):
/sys/devices/platform/soc@...2700000.noc/devfreq/32700000.noc
From : To
: 133333333 400000000 800000000 time(ms)
133333333: 0 1 0 624
400000000: 0 0 1 28
* 800000000: 1 0 0 30624
Total transition : 3
/sys/devices/platform/soc@...d400000.memory-
controller/devfreq/3d400000.memory-controller
From : To
: 25000000 100000000 800000000 time(ms)
25000000: 0 0 1 620
100000000: 0 0 0 0
* 800000000: 1 0 0 30652
Total transition : 2
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@0
From : To
: 25000000 133333333 333333333 time(ms)
25000000: 0 0 1 616
133333333: 0 0 0 0
* 333333333: 1 0 0 30668
Total transition : 2
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@1
From : To
: 25000000 266666666 time(ms)
* 25000000: 0 0 31284
266666666: 0 0 0
Total transition : 0
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@2
From : To
: 25000000 800000000 time(ms)
* 25000000: 0 0 31288
800000000: 1 0 0
Total transition : 1
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@3
From : To
: 25000000 800000000 time(ms)
* 25000000: 0 0 31292
800000000: 1 0 0
Total transition : 1
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@4
From : To
: 25000000 333333333 time(ms)
25000000: 0 1 648
* 333333333: 0 0 30652
Total transition : 1
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@5
From : To
: 25000000 500000000 time(ms)
* 25000000: 0 0 31304
500000000: 1 0 0
Total transition : 1
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@6
From : To
: 25000000 500000000 time(ms)
* 25000000: 0 0 31308
500000000: 0 0 0
Total transition : 0
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@7
From : To
: 25000000 128000000 500000000 time(ms)
* 25000000: 0 0 0 31312
128000000: 0 0 0 0
500000000: 1 0 0 0
Total transition : 1
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@8
From : To
: 25000000 133333333 time(ms)
* 25000000: 0 0 31316
133333333: 0 0 0
Total transition : 0
/sys/devices/platform/soc@...oc@0:pl301@...evfreq/soc@0:pl301@9
From : To
: 25000000 133333333 266666666 time(ms)
25000000: 0 0 5 1052
133333333: 0 0 0 0
* 266666666: 5 0 0 30268
Total transition : 10
but with display off (mxsfb not requesting anything), I get the same
fast freqs for noc and memory-controller. They should use the lowest
freqs. Only pl301@4 switches to 25mhz in that case. That's odd.
said (still) out-of-tree mxsfb request is
https://source.puri.sm/martin.kepplinger/linux-next/-/commit/ee7b1453295932da1e292b734afa7a03651ad9ba
and the exact tree I'm running for the above is
https://source.puri.sm/martin.kepplinger/linux-next/-/commits/5.15-rc3/librem5__integration_byzantium_test_new_devfreq_interconnect
thanks,
martin
Powered by blists - more mailing lists