[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <06b98a5d-5a16-2210-027c-358d45b2887f@fi.rohmeurope.com>
Date: Thu, 30 Sep 2021 09:41:10 +0000
From: "Vaittinen, Matti" <Matti.Vaittinen@...rohmeurope.com>
To: Tony Lindgren <tony@...mide.com>,
Robert Nelson <robertcnelson@...il.com>
CC: "H. Nikolaus Schaller" <hns@...delico.com>,
Matti Vaittinen <mazziesaccount@...il.com>,
Grygorii Strashko <grygorii.strashko@...com>,
Paul Barker <paul.barker@...cloud.com>,
Peter Ujfalusi <peter.ujfalusi@...il.com>,
BenoƮt Cousson <bcousson@...libre.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Suman Anna <s-anna@...com>,
"linux-omap@...r.kernel.org" <linux-omap@...r.kernel.org>
Subject: Re: beaglebone black boot failure Linux v5.15.rc1
Hi dee Ho peeps.
On 9/30/21 11:10, Tony Lindgren wrote:
> * Robert Nelson <robertcnelson@...il.com> [210924 18:41]:
>> On Wed, Sep 22, 2021 at 4:28 AM Vaittinen, Matti
>> <Matti.Vaittinen@...rohmeurope.com> wrote:
>>> Maybe a stupid question - how to find out the exact revision?
>>
>> Run:
>>
>> hexdump -e '8/1 "%c"' /sys/bus/i2c/devices/0-0050/eeprom -n 28 | cut -b 5-28
>>
>> Then lookup:
>>
>> https://github.com/beagleboard/image-builder/blob/master/readme.md
Thanks!
What I read out was:
A335BNLT00C03614BBBK9018
which I assume means the Rev C. (Two of the boards have element 14
printed on PCB, one has beagleboard.)
>
> So do I need some kernel module for this with the mainline kernel
> loaded? I don't have eeprom listed under 0-0050. >
> I also see eeprom only for am335x-pocketbeagle.dts and
> am57xx-beagle-x15-common.dtsi so maybe it should be justd added?
I did have the eeprom driver load and eeprom accessible - and I don't
think I have any DTS modifications. Perhaps you just don't have the
correct eeprom driver enabled at config?
Best Regards
-- Matti
Powered by blists - more mailing lists