| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211001094106.52412-7-krzysztof.kozlowski@canonical.com>
Date: Fri, 1 Oct 2021 11:41:02 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Subject: [PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema
Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
---
.../bindings/regulator/samsung,s5m8767.txt | 140 ------------------
.../bindings/regulator/samsung,s5m8767.yaml | 83 +++++++++++
MAINTAINERS | 2 +-
3 files changed, 84 insertions(+), 141 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
deleted file mode 100644
index 6cd83d920155..000000000000
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Binding for Samsung S5M8767 regulator block
-===========================================
-
-This is a part of device tree bindings for S5M family multi-function devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S5M8767 device provide buck and LDO regulators.
-
-To register these with regulator framework instantiate under main device node
-a sub-node named "regulators" with more sub-nodes for each regulator using the
-common regulator binding documented in:
- - Documentation/devicetree/bindings/regulator/regulator.txt
-
-
-Required properties of the main device node (the parent!):
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
- for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, then all the eight voltage values for the
- 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
- - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
- units for buck2 when changing voltage using gpio dvs. Refer to [1] below
- for additional information.
-
- - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
- units for buck3 when changing voltage using gpio dvs. Refer to [1] below
- for additional information.
-
- - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
- units for buck4 when changing voltage using gpio dvs. Refer to [1] below
- for additional information.
-
- - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
- - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
- - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
-
-Additional properties required if either of the optional properties are used:
-
- - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
- the possible 8 options selectable by the dvs gpios. The value of this
- property should be between 0 and 7. If not specified or if out of range, the
- default value of this property is set to 0.
-
- - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
- for dvs. The format of the gpio specifier depends in the gpio controller.
-
-
-Names of regulators supported by S5M8767 device:
- - LDOn
- - valid values for n are 1 to 28
- - Example: LDO1, LDO2, LDO28
- - BUCKn
- - valid values for n are 1 to 9.
- - Example: BUCK1, BUCK2, BUCK9
-Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of device.
-
-
-Optional properties of the nodes under "regulators" sub-node:
- - op_mode: describes the different operating modes of the LDO's with
- power mode change in SOC. The different possible values are,
- 0 - always off mode
- 1 - on in normal mode
- 2 - low power mode
- 3 - suspend mode
- - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
- GPIO controlling this regulator
- (enable/disable); This is valid only
- for buck9.
-
-Example:
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
-
- s5m8767,pmic-buck2-uses-gpio-dvs;
- s5m8767,pmic-buck3-uses-gpio-dvs;
- s5m8767,pmic-buck4-uses-gpio-dvs;
-
- s5m8767,pmic-buck-default-dvs-idx = <0>;
-
- s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
- <&gpx0 1 0>, /* DVS2 */
- <&gpx0 2 0>; /* DVS3 */
-
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
- <&gpx2 4 0>, /* SET2 */
- <&gpx2 5 0>; /* SET3 */
-
- s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
- <1250000>, <1200000>,
- <1150000>, <1100000>,
- <1000000>, <950000>;
-
- s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
- <1100000>, <1100000>,
- <1000000>, <1000000>,
- <1000000>, <1000000>;
-
- s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VDD_MIF_1.2V";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vemmc_reg: BUCK9 {
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <3>; /* Standby Mode */
- s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..3192a06b5ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC regulators
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The S5M8767 provides buck and LDO regulators.
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
+ additional information and example.
+
+patternProperties:
+ # 28 LDOs
+ "^LDO([1-9]|1[0-9]|2[0-8])$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name: true
+
+ op_mode:
+ enum: [0, 1, 2, 3]
+ default: 1
+ description: |
+ Describes the different operating modes of the LDO's with power mode
+ change in SOC. The different possible values are:
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 8 bucks
+ "^BUCK[1-8]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+ # 9 buck
+ "^BUCK9$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name: true
+
+ s5m8767,pmic-ext-control-gpios:
+ maxItems: 1
+ description: |
+ GPIO specifier for one GPIO controlling this regulator on/off.
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index ee486357cf45..5a7cb990b182 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16602,7 +16602,7 @@ S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
-F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
+F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
F: drivers/clk/clk-s2mps11.c
F: drivers/mfd/sec*.c
F: drivers/regulator/s2m*.c
--
2.30.2
Powered by blists - more mailing lists