[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YVb5RXvh9agIS7MG@ninjato>
Date: Fri, 1 Oct 2021 14:04:21 +0200
From: Wolfram Sang <wsa+renesas@...g-engineering.com>
To: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Rob Herring <robh+dt@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Vignesh Raghavendra <vigneshr@...com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Mark Brown <broonie@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Sergei Shtylyov <sergei.shtylyov@...il.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, linux-mtd@...ts.infradead.org,
linux-spi <linux-spi@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Biju Das <biju.das.jz@...renesas.com>
Subject: Re: [PATCH 6/6] memory: renesas-rpc-if: Add support for RZ/G2L
Hi Prabhakar,
I checked the G2L datasheet and reconsidered. It is better if your patch
goes in first. That means...
> > > > Is RPCIF_CMNCR_IO3FV and RPCIF_CMNCR_IO2FV actually documented in your
> > > > datasheets? I am asking because I have a patch pending to remove writing
> > > > to undocumented locations. So, I was aboout to remove the IO3FV and
> > > > IO2FV macros.
> > > >
> > > Yes they are documented, you should be able to download the HW manual from [1]
> >
> > Great, then I will keep them!
... that you could change the comments here from "undocumented" to
"documened for G2L" or similar.
> > > > > + regmap_read(rpc->regmap, RPCIF_PHYCNT, &dummy);
> > > > > + dummy &= ~RPCIF_PHYCNT_PHYMEM_MASK;
> > > > > + dummy |= RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260;
> > > > > + regmap_write(rpc->regmap, RPCIF_PHYCNT, dummy);
> > > >
> > > > regmap_update_bits?
> > > >
> > > Im a bit hesitant to use regmap_update_bits() here as some of the bits
> > > are not documented.
Here you can keep your code as is. I will change it afterwards if needed
once I clarified all undocumented locations.
Thanks and have a nice weekend,
Wolfram
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists