| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFqqQvKusZ2gzHh69LNrncvi9_o04_xFKDpAkDbS-8Zecg@mail.gmail.com>
Date: Fri, 1 Oct 2021 15:24:21 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Dmitry Osipenko <digetx@...il.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Viresh Kumar <vireshk@...nel.org>,
Stephen Boyd <sboyd@...nel.org>,
Peter De Schrijver <pdeschrijver@...dia.com>,
Mikko Perttunen <mperttunen@...dia.com>,
Peter Chen <peter.chen@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Nishanth Menon <nm@...com>,
Adrian Hunter <adrian.hunter@...el.com>,
Michael Turquette <mturquette@...libre.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-tegra <linux-tegra@...r.kernel.org>,
Linux PM <linux-pm@...r.kernel.org>,
Linux USB List <linux-usb@...r.kernel.org>,
linux-staging@...ts.linux.dev, linux-pwm@...r.kernel.org,
linux-mmc <linux-mmc@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
DTML <devicetree@...r.kernel.org>,
linux-clk <linux-clk@...r.kernel.org>,
Mark Brown <broonie@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
Richard Weinberger <richard@....at>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Lucas Stach <dev@...xeye.de>, Stefan Agner <stefan@...er.ch>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
David Heidelberg <david@...t.cz>
Subject: Re: [PATCH v13 09/35] gpu: host1x: Add runtime PM and OPP support
On Mon, 27 Sept 2021 at 00:42, Dmitry Osipenko <digetx@...il.com> wrote:
>
> Add runtime PM and OPP support to the Host1x driver. For the starter we
> will keep host1x always-on because dynamic power management require a major
> refactoring of the driver code since lot's of code paths are missing the
> RPM handling and we're going to remove some of these paths in the future.
>
> Tested-by: Peter Geis <pgwipeout@...il.com> # Ouya T30
> Tested-by: Paul Fertser <fercerpav@...il.com> # PAZ00 T20
> Tested-by: Nicolas Chauvet <kwizart@...il.com> # PAZ00 T20 and TK1 T124
> Tested-by: Matt Merhar <mattmerhar@...tonmail.com> # Ouya T30
> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
> ---
[...]
> --- a/drivers/gpu/host1x/dev.c
> +++ b/drivers/gpu/host1x/dev.c
> @@ -6,14 +6,18 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/delay.h>
> #include <linux/dma-mapping.h>
> #include <linux/io.h>
> #include <linux/list.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> #include <linux/of.h>
> +#include <linux/pm_runtime.h>
> #include <linux/slab.h>
>
> +#include <soc/tegra/common.h>
> +
> #define CREATE_TRACE_POINTS
> #include <trace/events/host1x.h>
> #undef CREATE_TRACE_POINTS
> @@ -190,6 +194,9 @@ static void host1x_setup_sid_table(struct host1x *host)
> const struct host1x_info *info = host->info;
> unsigned int i;
>
> + if (!info->has_hypervisor)
> + return;
> +
> for (i = 0; i < info->num_sid_entries; i++) {
> const struct host1x_sid_entry *entry = &info->sid_table[i];
>
> @@ -347,6 +354,27 @@ static void host1x_iommu_exit(struct host1x *host)
> }
> }
>
> +static int host1x_get_resets(struct host1x *host)
> +{
> + int err;
> +
> + host->resets[0].id = "mc";
> + host->resets[1].id = "host1x";
> + host->nresets = ARRAY_SIZE(host->resets);
> +
> + err = devm_reset_control_bulk_get_optional_exclusive_released(
> + host->dev, host->nresets, host->resets);
> + if (err) {
> + dev_err(host->dev, "failed to get reset: %d\n", err);
> + return err;
> + }
> +
> + if (WARN_ON(!host->resets[1].rstc))
> + return -ENOENT;
> +
> + return 0;
> +}
> +
> static int host1x_probe(struct platform_device *pdev)
> {
> struct host1x *host;
> @@ -423,12 +451,9 @@ static int host1x_probe(struct platform_device *pdev)
> return err;
> }
>
> - host->rst = devm_reset_control_get(&pdev->dev, "host1x");
> - if (IS_ERR(host->rst)) {
> - err = PTR_ERR(host->rst);
> - dev_err(&pdev->dev, "failed to get reset: %d\n", err);
> + err = host1x_get_resets(host);
> + if (err)
> return err;
> - }
>
> err = host1x_iommu_init(host);
> if (err < 0) {
> @@ -443,22 +468,10 @@ static int host1x_probe(struct platform_device *pdev)
> goto iommu_exit;
> }
>
> - err = clk_prepare_enable(host->clk);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to enable clock\n");
> - goto free_channels;
> - }
> -
> - err = reset_control_deassert(host->rst);
> - if (err < 0) {
> - dev_err(&pdev->dev, "failed to deassert reset: %d\n", err);
> - goto unprepare_disable;
> - }
> -
> err = host1x_syncpt_init(host);
> if (err) {
> dev_err(&pdev->dev, "failed to initialize syncpts\n");
> - goto reset_assert;
> + goto free_channels;
> }
>
> err = host1x_intr_init(host, syncpt_irq);
> @@ -467,10 +480,18 @@ static int host1x_probe(struct platform_device *pdev)
> goto deinit_syncpt;
> }
>
> - host1x_debug_init(host);
> + pm_runtime_enable(&pdev->dev);
> +
> + err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
> + if (err)
> + goto pm_disable;
>
> - if (host->info->has_hypervisor)
> - host1x_setup_sid_table(host);
> + /* the driver's code isn't ready yet for the dynamic RPM */
> + err = pm_runtime_resume_and_get(&pdev->dev);
> + if (err)
> + goto pm_disable;
> +
> + host1x_debug_init(host);
>
> err = host1x_register(host);
> if (err < 0)
> @@ -486,13 +507,14 @@ static int host1x_probe(struct platform_device *pdev)
> host1x_unregister(host);
> deinit_debugfs:
> host1x_debug_deinit(host);
> +
> + pm_runtime_put(&pdev->dev);
pm_runtime_put() is asynchronous, so it may not actually succeed to
trigger the ->runtime_suspend() callback to be invoked. Thus, this
could end up that we leave clocks prepared/enabled when ->probe()
fails, for example.
I guess pm_runtime_put_sync_suspend() is slightly better.
Another option is to call pm_runtime_force_suspend(), but then you
must skip the call pm_runtime_disable() afterwards, as that has
already been done inside that function.
> +pm_disable:
> + pm_runtime_disable(&pdev->dev);
> +
> host1x_intr_deinit(host);
> deinit_syncpt:
> host1x_syncpt_deinit(host);
> -reset_assert:
> - reset_control_assert(host->rst);
> -unprepare_disable:
> - clk_disable_unprepare(host->clk);
> free_channels:
> host1x_channel_list_free(&host->channel_list);
> iommu_exit:
> @@ -507,19 +529,94 @@ static int host1x_remove(struct platform_device *pdev)
>
> host1x_unregister(host);
> host1x_debug_deinit(host);
> +
> + pm_runtime_put(&pdev->dev);
Similar comment as in ->probe().
> + pm_runtime_disable(&pdev->dev);
> +
> host1x_intr_deinit(host);
> host1x_syncpt_deinit(host);
> - reset_control_assert(host->rst);
> - clk_disable_unprepare(host->clk);
> host1x_iommu_exit(host);
>
> return 0;
> }
>
> +
> + host1x_setup_sid_table(host);
> + host1x_syncpt_restore(host);
> + host1x_intr_start(host);
> +
> + return 0;
> +
> +disable_clk:
> + clk_disable_unprepare(host->clk);
> +release_reset:
> + reset_control_bulk_release(host->nresets, host->resets);
> +
> + return err;
> +}
> +
> +static const struct dev_pm_ops host1x_pm = {
> + SET_RUNTIME_PM_OPS(host1x_runtime_suspend, host1x_runtime_resume,
> + NULL)
> + /* TODO: add system suspend-resume once driver will be ready for that */
> +};
[...]
Kind regards
Uffe
Powered by blists - more mailing lists