linux-kernel - Re: [PATCH v13 20/35] mtd: rawnand: tegra: Add runtime PM and OPP support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 1 Oct 2021 17:35:20 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
Cc:     Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Viresh Kumar <vireshk@...nel.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Peter De Schrijver <pdeschrijver@...dia.com>,
        Mikko Perttunen <mperttunen@...dia.com>,
        Peter Chen <peter.chen@...nel.org>,
        Lee Jones <lee.jones@...aro.org>,
        Uwe Kleine-König <u.kleine-koenig@...gutronix.de>,
        Nishanth Menon <nm@...com>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Michael Turquette <mturquette@...libre.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        linux-tegra <linux-tegra@...r.kernel.org>,
        Linux PM <linux-pm@...r.kernel.org>,
        Linux USB List <linux-usb@...r.kernel.org>,
        linux-staging@...ts.linux.dev, linux-pwm@...r.kernel.org,
        linux-mmc <linux-mmc@...r.kernel.org>,
        dri-devel <dri-devel@...ts.freedesktop.org>,
        DTML <devicetree@...r.kernel.org>,
        linux-clk <linux-clk@...r.kernel.org>,
        Mark Brown <broonie@...nel.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        Richard Weinberger <richard@....at>,
        Miquel Raynal <miquel.raynal@...tlin.com>,
        Lucas Stach <dev@...xeye.de>, Stefan Agner <stefan@...er.ch>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        David Heidelberg <david@...t.cz>
Subject: Re: [PATCH v13 20/35] mtd: rawnand: tegra: Add runtime PM and OPP
 support

01.10.2021 17:24, Ulf Hansson пишет:
> On Mon, 27 Sept 2021 at 00:42, Dmitry Osipenko <digetx@...il.com> wrote:
>>
>> The NAND on Tegra belongs to the core power domain and we're going to
>> enable GENPD support for the core domain. Now NAND must be resumed using
>> runtime PM API in order to initialize the NAND power state. Add runtime PM
>> and OPP support to the NAND driver.
>>
>> Acked-by: Miquel Raynal <miquel.raynal@...tlin.com>
>> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
>> ---
>>  drivers/mtd/nand/raw/tegra_nand.c | 55 ++++++++++++++++++++++++++-----
>>  1 file changed, 47 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
>> index 32431bbe69b8..098fcc9cb9df 100644
>> --- a/drivers/mtd/nand/raw/tegra_nand.c
>> +++ b/drivers/mtd/nand/raw/tegra_nand.c
>> @@ -17,8 +17,11 @@
>>  #include <linux/mtd/rawnand.h>
>>  #include <linux/of.h>
>>  #include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>>  #include <linux/reset.h>
>>
>> +#include <soc/tegra/common.h>
>> +
>>  #define COMMAND                                        0x00
>>  #define   COMMAND_GO                           BIT(31)
>>  #define   COMMAND_CLE                          BIT(30)
>> @@ -1151,6 +1154,7 @@ static int tegra_nand_probe(struct platform_device *pdev)
>>                 return -ENOMEM;
>>
>>         ctrl->dev = &pdev->dev;
>> +       platform_set_drvdata(pdev, ctrl);
>>         nand_controller_init(&ctrl->controller);
>>         ctrl->controller.ops = &tegra_nand_controller_ops;
>>
>> @@ -1166,14 +1170,22 @@ static int tegra_nand_probe(struct platform_device *pdev)
>>         if (IS_ERR(ctrl->clk))
>>                 return PTR_ERR(ctrl->clk);
>>
>> -       err = clk_prepare_enable(ctrl->clk);
>> +       err = devm_pm_runtime_enable(&pdev->dev);
>> +       if (err)
>> +               return err;
>> +
>> +       err = devm_tegra_core_dev_init_opp_table_common(&pdev->dev);
>> +       if (err)
>> +               return err;
>> +
>> +       err = pm_runtime_resume_and_get(&pdev->dev);
>>         if (err)
>>                 return err;
>>
>>         err = reset_control_reset(rst);
>>         if (err) {
>>                 dev_err(ctrl->dev, "Failed to reset HW: %d\n", err);
>> -               goto err_disable_clk;
>> +               goto err_put_pm;
>>         }
>>
>>         writel_relaxed(HWSTATUS_CMD_DEFAULT, ctrl->regs + HWSTATUS_CMD);
>> @@ -1188,21 +1200,19 @@ static int tegra_nand_probe(struct platform_device *pdev)
>>                                dev_name(&pdev->dev), ctrl);
>>         if (err) {
>>                 dev_err(ctrl->dev, "Failed to get IRQ: %d\n", err);
>> -               goto err_disable_clk;
>> +               goto err_put_pm;
>>         }
>>
>>         writel_relaxed(DMA_MST_CTRL_IS_DONE, ctrl->regs + DMA_MST_CTRL);
>>
>>         err = tegra_nand_chips_init(ctrl->dev, ctrl);
>>         if (err)
>> -               goto err_disable_clk;
>> -
>> -       platform_set_drvdata(pdev, ctrl);
>> +               goto err_put_pm;
>>
> 
> There is no corresponding call pm_runtime_put() here. Is it
> intentional to always leave the device runtime resumed after ->probe()
> has succeeded?
> 
> I noticed you included some comments about this for some other
> drivers, as those needed more tweaks. Is that also the case for this
> driver?

Could you please clarify? There is pm_runtime_put() in both probe-error
and remove() code paths here.

I assume you're meaning pm_runtime_disable(), but this patch uses
resource-managed devm_pm_runtime_enable(), and thus, explicit disable
isn't needed.

>>         return 0;
>>
>> -err_disable_clk:
>> -       clk_disable_unprepare(ctrl->clk);
>> +err_put_pm:
>> +       pm_runtime_put(ctrl->dev);
>>         return err;
>>  }
>>
> 
> [...]
> 
> Kind regards
> Uffe
>