[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211001152153.4604-1-dafna.hirschfeld@collabora.com>
Date: Fri, 1 Oct 2021 17:21:53 +0200
From: Dafna Hirschfeld <dafna.hirschfeld@...labora.com>
To: broonie@...nel.org
Cc: Dafna Hirschfeld <dafna.hirschfeld@...labora.com>,
kernel@...labora.com, linux-spi@...r.kernel.org,
enric.balletbo@...labora.com, dafna3@...il.com,
Mason Zhang <Mason.Zhang@...iatek.com>,
Laxman Dewangan <ldewangan@...dia.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, wsd_upstream@...iatek.com,
Matthias Brugger <matthias.bgg@...il.com>
Subject: [PATCH v2] spi: mediatek: skip delays if they are 0
In the function 'mtk_spi_set_hw_cs_timing'
the 'setup', 'hold' and 'inactive' delays are configured.
In case those values are 0 it causes errors on mt8173:
cros-ec-i2c-tunnel 1100a000.spi:ec@0:i2c-tunnel0:
Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.
This patch fixes that issues by setting only the values
that are not 0.
Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@...labora.com>
---
Changes since v1: v1 was a revert of the commits
04e6bb0d6bb1 ("spi: modify set_cs_timing parameter")
5c842e51ac63 ("spi: mediatek: fix build warnning in set cs timing")
this version fixes the erros instead of reverting
drivers/spi/spi-mt65xx.c | 64 ++++++++++++++++++++++------------------
1 file changed, 36 insertions(+), 28 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 386e8c84be0a..a15de10ee286 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -233,36 +233,44 @@ static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
return delay;
inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
- setup = setup ? setup : 1;
- hold = hold ? hold : 1;
- inactive = inactive ? inactive : 1;
-
- reg_val = readl(mdata->base + SPI_CFG0_REG);
- if (mdata->dev_comp->enhance_timing) {
- hold = min_t(u32, hold, 0x10000);
- setup = min_t(u32, setup, 0x10000);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- } else {
- hold = min_t(u32, hold, 0x100);
- setup = min_t(u32, setup, 0x100);
- reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup - 1) & 0xff)
- << SPI_CFG0_CS_SETUP_OFFSET);
+ if (hold || setup) {
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
+ if (mdata->dev_comp->enhance_timing) {
+ if (hold) {
+ hold = min_t(u32, hold, 0x10000);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ }
+ if (setup) {
+ setup = min_t(u32, setup, 0x10000);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ }
+ } else {
+ if (hold) {
+ hold = min_t(u32, hold, 0x100);
+ reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+ }
+ if (setup) {
+ setup = min_t(u32, setup, 0x100);
+ reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xff)
+ << SPI_CFG0_CS_SETUP_OFFSET);
+ }
+ }
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
}
- writel(reg_val, mdata->base + SPI_CFG0_REG);
- inactive = min_t(u32, inactive, 0x100);
- reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
- reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
- writel(reg_val, mdata->base + SPI_CFG1_REG);
+ if (inactive) {
+ inactive = min_t(u32, inactive, 0x100);
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+ reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+ }
return 0;
}
--
2.17.1
Powered by blists - more mailing lists