Message-ID: <AS8PR04MB86736BFE2CEEF2FBEB6D7985E0AE9@AS8PR04MB8673.eurprd04.prod.outlook.com>
Date:   Mon, 4 Oct 2021 10:53:01 +0000
From:   Kuldeep Singh <kuldeep.singh@....com>
To:     Vladimir Oltean <vladimir.oltean@....com>,
        Michael Walle <michael@...le.cc>
CC:     "linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Ashish Kumar <ashish.kumar@....com>,
        Yogesh Gaur <yogeshgaur.83@...il.com>,
        Mark Brown <broonie@...nel.org>
Subject: RE: [PATCH] spi: spi-nxp-fspi: don't depend on a specific node name
 erratum workaround

Hi Vladimir and Michael,

> -----Original Message-----
> From: Vladimir Oltean <vladimir.oltean@....com>
> Sent: Saturday, October 2, 2021 2:53 PM
> To: Michael Walle <michael@...le.cc>
> Cc: linux-spi@...r.kernel.org; linux-kernel@...r.kernel.org; Ashish Kumar
> <ashish.kumar@....com>; Yogesh Gaur <yogeshgaur.83@...il.com>; Mark
> Brown <broonie@...nel.org>; Kuldeep Singh <kuldeep.singh@....com>
> Subject: Re: [PATCH] spi: spi-nxp-fspi: don't depend on a specific node name
> erratum workaround
> 
> On Sat, Oct 02, 2021 at 10:58:31AM +0200, Michael Walle wrote:
> > Am 2021-10-02 03:37, schrieb Vladimir Oltean:
> > > On Fri, Oct 01, 2021 at 11:27:26PM +0200, Michael Walle wrote:
> >
> > > > Make the workaround more reliable and just drop the unneeded
> > > > sysclk lookup.
> > > >
> > > > For reference, the error during the bootup is the following:
> > > > [    4.898400] nxp-fspi 20c0000.spi: Errata cannot be executed. Read
> > > > via IP bus may not work
> > >
> > > Well, in Kuldeep's defence, at least this part is sane, right? I
> > > mean we cannot prove an issue => we don't disable reads via the AHB.
> > > So it's just the error message (which I didn't notice TBH, sorry).
> >
> > Its just an error message in case the platform clock is 400Mhz. But if
> > you have a 300MHz platform clock the workaround wouldn't be applied.
> 
> Understood, that's why I asked...
> 
> > The reference is just there if someone stumbles over this error and
> > searches for it on google.
> >
> > > On the other hand, is anyone using LS1028A with a platform clock of
> > > 300 MHz? :)
> 
> ...this.

I didn't receive emails in proper order not sure why.
Anyway, I will try to pitch in details which I have.

There was one customer(cannot recall name) using LS1028A with 300Mhz.
They reported AHB failure issue and later on it turns out to be an errata.
I didn't hear anything from them whether they pursued with 300Mhz or fallback to 400Mhz.

> 
> > > > Fixes: 82ce7d0e74b6 ("spi: spi-nxp-fspi: Implement errata
> > > > workaround for LS1028A")
> > > > Cc: Vladimir Oltean <vladimir.oltean@....com>
> > > > Signed-off-by: Michael Walle <michael@...le.cc>
> > > > ---
> > > >  drivers/spi/spi-nxp-fspi.c | 26 +++++++-------------------
> > > >  1 file changed, 7 insertions(+), 19 deletions(-)
> > > >
> > > > diff --git a/drivers/spi/spi-nxp-fspi.c
> > > > b/drivers/spi/spi-nxp-fspi.c index a66fa97046ee..2b0301fc971c
> > > > 100644
> > > > --- a/drivers/spi/spi-nxp-fspi.c
> > > > +++ b/drivers/spi/spi-nxp-fspi.c
> > > > @@ -33,6 +33,7 @@
> > > >
> > > >  #include <linux/acpi.h>
> > > >  #include <linux/bitops.h>
> > > > +#include <linux/bitfield.h>
> > > >  #include <linux/clk.h>
> > > >  #include <linux/completion.h>
> > > >  #include <linux/delay.h>
> > > > @@ -315,6 +316,7 @@
> > > >  #define NXP_FSPI_MIN_IOMAP	SZ_4M
> > > >
> > > >  #define DCFG_RCWSR1		0x100
> > > > +#define SYS_PLL_RAT		GENMASK(6, 2)
> > >
> > > Ugh. So your solution still makes a raw read of the platform PLL
> > > value from the DCFG, now it just adds a nice definition for it. Not nice.
> >
> > Keep in mind that this is intended to be a fixes commit. I agree with
> > you that having a new clock in the device tree and checking that would
> > have been better. Feel free to change the workaround after this fix is
> > applied (without a fixes tag), but I don't think introducing a new
> > clock (and you forgot to update the bindings) will qualify as a fixes
> > commit. Esp. when you change the compatible string.

dt-bindings are updated to json schema and already posted upstream awaiting Mark's feedback.

Moreover, using third optional clock seems a viable solution.
Since this is the first time we have stumbled such issue and isn't a frequent one,
We can keep current changes as is and if face similar issue later, can switch to new proposed solution.

Similar changes are also done for u-boot[1] in an absurd manner as I couldn't find simpler way to do it.
I'll be glad to receive feedback on those patches.

Regards
Kuldeep
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=256398

> 
> I think it could be justified as a fixes commit to Shawn Guo - the LS1028A is
> not "compatible" with LX2160A in the sense that it has software-visible errata
> which LX2160A doesn't have.
> 
> > > >  /* Access flash memory using IP bus only */
> > > >  #define FSPI_QUIRK_USE_IP_ONLY	BIT(0)
> > > > @@ -926,9 +928,8 @@ static void erratum_err050568(struct nxp_fspi
> *f)
> > > >  		{ .family = "QorIQ LS1028A" },
> > > >  		{ /* sentinel */ }
> > > >  	};
> > > > -	struct device_node *np;
> > > >  	struct regmap *map;
> > > > -	u32 val = 0, sysclk = 0;
> > > > +	u32 val, sys_pll_ratio;
> > > >  	int ret;
> > > >
> > > >  	/* Check for LS1028A family */
> > > > @@ -937,7 +938,6 @@ static void erratum_err050568(struct nxp_fspi
> *f)
> > > >  		return;
> > > >  	}
> > > >
> > > > -	/* Compute system clock frequency multiplier ratio */
> > > >  	map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg");
> > > >  	if (IS_ERR(map)) {
> > > >  		dev_err(f->dev, "No syscon regmap\n"); @@ -948,23 +948,11
> @@
> > > > static void erratum_err050568(struct nxp_fspi
> > > > *f)
> > > >  	if (ret < 0)
> > > >  		goto err;
> > > >
> > > > -	/* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier
> > > > ratio */
> > > > -	val = (val >> 2) & 0x1F;
> > > > -	WARN(val == 0, "Strapping is zero: Cannot determine ratio");
> > > > +	sys_pll_ratio = FIELD_GET(SYS_PLL_RAT, val);
> > > > +	dev_dbg(f->dev, "val: 0x%08x, sys_pll_ratio: %d\n", val,
> > > > sys_pll_ratio);
> > >
> > > Do we really feel that this dev_dbg is valuable?
> >
> > No, I just briefly looked at it to see it prints 4 ;)
> >
> > > > -	/* Compute system clock frequency */
> > > > -	np = of_find_node_by_name(NULL, "clock-sysclk");
> > > > -	if (!np)
> > > > -		goto err;
> > > > -
> > > > -	if (of_property_read_u32(np, "clock-frequency", &sysclk))
> > > > -		goto err;
> > > > -
> > > > -	sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */
> > > > -	dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk);
> > > > -
> > > > -	/* Use IP bus only if PLL is 300MHz */
> > > > -	if (sysclk == 300)
> > > > +	/* Use IP bus only if platform clock is 300MHz */
> > > > +	if (sys_pll_ratio == 3)
> > > >  		f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY;
> > > >
> > > >  	return;
> > > > --
> > > > 2.30.2
> > > >
> > >
> > > How about:
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > index 343ecf0e8973..ffe820c22719 100644
> > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> > > @@ -326,15 +326,17 @@ i2c7: i2c@...0000 {
> > >  		};
> > >
> > >  		fspi: spi@...0000 {
> > > -			compatible = "nxp,lx2160a-fspi";
> > > +			compatible = "nxp,ls1028a-fspi";
> >
> > Why not
> >   compatible = "nxp,ls1028a-fspi", "nxp,lx2160a-fspi"; to keep at
> > least some compatibility.
> 
> Of course that would be even better. I just wanted to rush to get here before
> Mark, and it looks like I still didn't make it in time.
> 
> Worst case, new (cleaned up to not calculate the platform clock on its own)
> driver will still probe with old device tree, but not apply the ERR workaround
> for 300 MHz systems.
> 
> I may be ignorant here, but I just don't know how many systems use 300
> MHz platform in practice. Anyway, it's always difficult to fix up something
> that came to depend on DT bindings in a certain way.
> 
> > >  			#address-cells = <1>;
> > >  			#size-cells = <0>;
> > >  			reg = <0x0 0x20c0000 0x0 0x10000>,
> > >  			      <0x0 0x20000000 0x0 0x10000000>;
> > >  			reg-names = "fspi_base", "fspi_mmap";
> > >  			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > > -			clocks = <&fspi_clk>, <&fspi_clk>;
> > > -			clock-names = "fspi_en", "fspi";
> > > +			clocks = <&fspi_clk>, <&fspi_clk>,
> > > +				 <&clockgen QORIQ_CLK_PLATFORM_PLL
> > > +					    QORIQ_CLK_PLL_DIV(2)>;
> > > +			clock-names = "fspi_en", "fspi", "base";
> > >  			status = "disabled";
> > >  		};
> > >
> > > diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
> > > index a66fa97046ee..f2815e6cae2c 100644
> > > --- a/drivers/spi/spi-nxp-fspi.c
> > > +++ b/drivers/spi/spi-nxp-fspi.c
> > > @@ -314,8 +314,6 @@
> > >  #define NXP_FSPI_MAX_CHIPSELECT		4
> > >  #define NXP_FSPI_MIN_IOMAP	SZ_4M
> > >
> > > -#define DCFG_RCWSR1		0x100
> > > -
> > >  /* Access flash memory using IP bus only */
> > >  #define FSPI_QUIRK_USE_IP_ONLY	BIT(0)
> > >
> > > @@ -922,55 +920,18 @@ static int nxp_fspi_adjust_op_size(struct
> > > spi_mem *mem, struct spi_mem_op *op)
> > >
> > >  static void erratum_err050568(struct nxp_fspi *f)  {
> > > -	const struct soc_device_attribute ls1028a_soc_attr[] = {
> > > -		{ .family = "QorIQ LS1028A" },
> > > -		{ /* sentinel */ }
> > > -	};
> >
> > Mh, I see how you came to the conclusion to rename the compatible
> > string. But normally, this also contains a revision check, which is
> > missing here IMHO. It might as well be fixed in the next revision
> > (though we both know, this is highly unlikely; its still wrong). So
> > while you could rename the compatible (oh no!) you'd still have to do
> > the rev 1.0 check here.
> 
> So you want a compatible string a la "fsl,ls1021a-v1.0-dspi", right?
> I don't know, no strong opinion, as you said, we both know that no LS1028A
> rev 2 seems to be planned.
> 
> > > -	struct device_node *np;
> > > -	struct regmap *map;
> > > -	u32 val = 0, sysclk = 0;
> > > -	int ret;
> > > +	struct clk *clk_base;
> > >
> > > -	/* Check for LS1028A family */
> > > -	if (!soc_device_match(ls1028a_soc_attr)) {
> > > -		dev_dbg(f->dev, "Errata applicable only for LS1028A\n");
> > > +	clk_base = clk_get(f->dev, "base");
> > > +	if (IS_ERR(clk_base)) {
> > > +		dev_err(f->dev, "Errata cannot be executed. Read via IP bus
> may
> > > +not
> > > work\n");
> > >  		return;
> > >  	}
> > >
> > > -	/* Compute system clock frequency multiplier ratio */
> > > -	map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg");
> > > -	if (IS_ERR(map)) {
> > > -		dev_err(f->dev, "No syscon regmap\n");
> > > -		goto err;
> > > -	}
> > > -
> > > -	ret = regmap_read(map, DCFG_RCWSR1, &val);
> > > -	if (ret < 0)
> > > -		goto err;
> > > -
> > > -	/* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier ratio */
> > > -	val = (val >> 2) & 0x1F;
> > > -	WARN(val == 0, "Strapping is zero: Cannot determine ratio");
> > > -
> > > -	/* Compute system clock frequency */
> > > -	np = of_find_node_by_name(NULL, "clock-sysclk");
> > > -	if (!np)
> > > -		goto err;
> > > -
> > > -	if (of_property_read_u32(np, "clock-frequency", &sysclk))
> > > -		goto err;
> > > -
> > > -	sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */
> > > -	dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk);
> > > -
> > > -	/* Use IP bus only if PLL is 300MHz */
> > > -	if (sysclk == 300)
> > > +	/* Use IP bus only if platform PLL is configured for 300 MHz,
> > > +hence
> > > we get 150 MHz */
> > > +	if (clk_get_rate(clk_base) == 150000000)
> > >  		f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY;
> > > -
> > > -	return;
> > > -
> > > -err:
> > > -	dev_err(f->dev, "Errata cannot be executed. Read via IP bus may not
> > > work\n");
> > > +	clk_put(clk_base);
> > >  }
> > >
> > >  static int nxp_fspi_default_setup(struct nxp_fspi *f) @@ -994,10
> > > +955,8 @@ static int nxp_fspi_default_setup(struct nxp_fspi
> > > *f)
> > >  	/*
> > >  	 * ERR050568: Flash access by FlexSPI AHB command may not work
> with
> > >  	 * platform frequency equal to 300 MHz on LS1028A.
> > > -	 * LS1028A reuses LX2160A compatible entry. Make errata applicable
> for
> > > -	 * Layerscape LS1028A platform.
> > >  	 */
> > > -	if (of_device_is_compatible(f->dev->of_node, "nxp,lx2160a-fspi"))
> > > +	if (of_device_is_compatible(f->dev->of_node, "nxp,ls1028a-fspi"))
> > >  		erratum_err050568(f);
> > >
> > >  	/* Reset the module */
> >
> > --
> > -michael

Powered by blists - more mailing lists