| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YV4QCY7wpZI7Xta3@robh.at.kernel.org>
Date: Wed, 6 Oct 2021 16:07:21 -0500
From: Rob Herring <robh@...nel.org>
To: Johan Jonker <jbx6244@...il.com>
Cc: heiko@...ech.de, linus.walleij@...aro.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: pinctrl: convert
rockchip,pinctrl.txt to YAML
On Thu, Sep 30, 2021 at 11:52:23AM +0200, Johan Jonker wrote:
> Convert rockchip,pinctrl.txt to YAML
>
> Signed-off-by: Johan Jonker <jbx6244@...il.com>
> ---
>
> Changed V2:
> Add '|' to maintain the paragraphs.
> Change gpio patternProperties.
> Move description to items.
> Remove type array.
> Restyle
> ---
> .../bindings/pinctrl/rockchip,pinctrl.txt | 114 ------------
> .../bindings/pinctrl/rockchip,pinctrl.yaml | 176 ++++++++++++++++++
> 2 files changed, 176 insertions(+), 114 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
> create mode 100644 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
> deleted file mode 100644
> index 84c411129..000000000
> --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
> +++ /dev/null
> @@ -1,114 +0,0 @@
> -* Rockchip Pinmux Controller
> -
> -The Rockchip Pinmux Controller, enables the IC
> -to share one PAD to several functional blocks. The sharing is done by
> -multiplexing the PAD input/output signals. For each PAD there are several
> -muxing options with option 0 being the use as a GPIO.
> -
> -Please refer to pinctrl-bindings.txt in this directory for details of the
> -common pinctrl bindings used by client devices, including the meaning of the
> -phrase "pin configuration node".
> -
> -The Rockchip pin configuration node is a node of a group of pins which can be
> -used for a specific device or function. This node represents both mux and
> -config of the pins in that group. The 'pins' selects the function mode(also
> -named pin mode) this pin can work on and the 'config' configures various pad
> -settings such as pull-up, etc.
> -
> -The pins are grouped into up to 5 individual pin banks which need to be
> -defined as gpio sub-nodes of the pinmux controller.
> -
> -Required properties for iomux controller:
> - - compatible: should be
> - "rockchip,px30-pinctrl": for Rockchip PX30
> - "rockchip,rv1108-pinctrl": for Rockchip RV1108
> - "rockchip,rk2928-pinctrl": for Rockchip RK2928
> - "rockchip,rk3066a-pinctrl": for Rockchip RK3066a
> - "rockchip,rk3066b-pinctrl": for Rockchip RK3066b
> - "rockchip,rk3128-pinctrl": for Rockchip RK3128
> - "rockchip,rk3188-pinctrl": for Rockchip RK3188
> - "rockchip,rk3228-pinctrl": for Rockchip RK3228
> - "rockchip,rk3288-pinctrl": for Rockchip RK3288
> - "rockchip,rk3308-pinctrl": for Rockchip RK3308
> - "rockchip,rk3328-pinctrl": for Rockchip RK3328
> - "rockchip,rk3368-pinctrl": for Rockchip RK3368
> - "rockchip,rk3399-pinctrl": for Rockchip RK3399
> - "rockchip,rk3568-pinctrl": for Rockchip RK3568
> -
> - - rockchip,grf: phandle referencing a syscon providing the
> - "general register files"
> -
> -Optional properties for iomux controller:
> - - rockchip,pmu: phandle referencing a syscon providing the pmu registers
> - as some SoCs carry parts of the iomux controller registers there.
> - Required for at least rk3188 and rk3288. On the rk3368 this should
> - point to the PMUGRF syscon.
> -
> -Deprecated properties for iomux controller:
> - - reg: first element is the general register space of the iomux controller
> - It should be large enough to contain also separate pull registers.
> - second element is the separate pull register space of the rk3188.
> - Use rockchip,grf and rockchip,pmu described above instead.
> -
> -Required properties for gpio sub nodes:
> -See rockchip,gpio-bank.yaml
> -
> -Required properties for pin configuration node:
> - - rockchip,pins: 3 integers array, represents a group of pins mux and config
> - setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
> - The MUX 0 means gpio and MUX 1 to N mean the specific device function.
> - The phandle of a node containing the generic pinconfig options
> - to use, as described in pinctrl-bindings.txt in this directory.
> -
> -Examples:
> -
> -#include <dt-bindings/pinctrl/rockchip.h>
> -
> -...
> -
> -pinctrl@...08000 {
> - compatible = "rockchip,rk3066a-pinctrl";
> - rockchip,grf = <&grf>;
> -
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - gpio0: gpio0@...34000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x20034000 0x100>;
> - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk_gates8 9>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - ...
> -
> - pcfg_pull_default: pcfg_pull_default {
> - bias-pull-pin-default
> - };
> -
> - uart2 {
> - uart2_xfer: uart2-xfer {
> - rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
> - <1 RK_PB1 1 &pcfg_pull_default>;
> - };
> - };
> -};
> -
> -uart2: serial@...64000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x20064000 0x400>;
> - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <1>;
> - clocks = <&mux_uart2>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&uart2_xfer>;
> -};
> diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> new file mode 100644
> index 000000000..01a62245b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
> @@ -0,0 +1,176 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Pinmux Controller
> +
> +maintainers:
> + - Heiko Stuebner <heiko@...ech.de>
> +
> +description: |
> + The Rockchip Pinmux Controller enables the IC to share one PAD
> + to several functional blocks. The sharing is done by multiplexing
> + the PAD input/output signals. For each PAD there are several muxing
> + options with option 0 being used as a GPIO.
> +
> + Please refer to pinctrl-bindings.txt in this directory for details of the
> + common pinctrl bindings used by client devices, including the meaning of the
> + phrase "pin configuration node".
> +
> + The Rockchip pin configuration node is a node of a group of pins which can be
> + used for a specific device or function. This node represents both mux and
> + config of the pins in that group. The 'pins' selects the function mode
> + (also named pin mode) this pin can work on and the 'config' configures
> + various pad settings such as pull-up, etc.
> +
> + The pins are grouped into up to 9 individual pin banks which need to be
> + defined as gpio sub-nodes of the pinmux controller.
> +
> +properties:
> + compatible:
> + enum:
> + - rockchip,px30-pinctrl
> + - rockchip,rk2928-pinctrl
> + - rockchip,rk3066a-pinctrl
> + - rockchip,rk3066b-pinctrl
> + - rockchip,rk3128-pinctrl
> + - rockchip,rk3188-pinctrl
> + - rockchip,rk3228-pinctrl
> + - rockchip,rk3288-pinctrl
> + - rockchip,rk3308-pinctrl
> + - rockchip,rk3328-pinctrl
> + - rockchip,rk3368-pinctrl
> + - rockchip,rk3399-pinctrl
> + - rockchip,rk3568-pinctrl
> + - rockchip,rv1108-pinctrl
> +
> + rockchip,grf:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + The phandle of the syscon node for the GRF registers.
> +
> + rockchip,pmu:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + The phandle of the syscon node for the PMU registers,
> + as some SoCs carry parts of the iomux controller registers there.
> + Required for at least rk3188 and rk3288. On the rk3368 this should
> + point to the PMUGRF syscon.
> +
> + "#address-cells":
> + enum: [1, 2]
> +
> + "#size-cells":
> + enum: [1, 2]
> +
> + ranges: true
> +
> +patternProperties:
> + "gpio@[0-9a-f]+$":
> + type: object
> +
> + $ref: "/schemas/gpio/rockchip,gpio-bank.yaml#"
> +
> + unevaluatedProperties: false
> +
> + "pcfg-[a-z0-9-]+$":
> + type: object
> + properties:
> + bias-disable: true
> +
> + bias-pull-down: true
> +
> + bias-pull-pin-default: true
> +
> + bias-pull-up: true
> +
> + drive-strength:
> + minimum: 0
> + maximum: 20
> +
> + input-enable: true
> +
> + input-schmitt-enable: true
> +
> + output-high: true
> +
> + output-low: true
> +
> + additionalProperties: false
> +
> +additionalProperties:
> + type: object
> + additionalProperties:
> + type: object
> + properties:
> + rockchip,pins:
Needs a type reference (uint32-matrix).
> + minItems: 1
> + items:
> + items:
> + - minimum: 0
> + maximum: 8
> + description:
> + Pin bank.
> + - minimum: 0
> + maximum: 31
> + description:
> + Pin bank index.
> + - minimum: 0
> + maximum: 6
> + description:
> + Mux 0 means gpio and mux 1 to N means
> + the specific device function.
> + - description:
> + The phandle of a node contains the generic pinconfig options
> + to use as described in pinctrl-bindings.txt.
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/pinctrl/rockchip.h>
> +
> + pinctrl: pinctrl {
> + compatible = "rockchip,rk3066a-pinctrl";
> + rockchip,grf = <&grf>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gpio0: gpio@...34000 {
> + compatible = "rockchip,gpio-bank";
> + reg = <0x20034000 0x100>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk_gates8 9>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pcfg_pull_default: pcfg-pull-default {
> + bias-pull-pin-default;
> + };
> +
> + uart2 {
> + uart2_xfer: uart2-xfer {
> + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
> + <1 RK_PB1 1 &pcfg_pull_default>;
> + };
> + };
> + };
> +
> + uart2: serial@...64000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x20064000 0x400>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mux_uart2>;
> + pinctrl-0 = <&uart2_xfer>;
> + pinctrl-names = "default";
> + reg-io-width = <1>;
> + reg-shift = <2>;
> + };
> --
> 2.20.1
>
>
Powered by blists - more mailing lists