[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <YV1QTrMHRX1VGgaP@atomide.com>
Date: Wed, 6 Oct 2021 10:29:18 +0300
From: Tony Lindgren <tony@...mide.com>
To: Drew Fustini <drew@...7.com>
Cc: BenoƮt Cousson <bcousson@...libre.com>,
Rob Herring <robh+dt@...nel.org>, linux-omap@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: am335x-pocketbeagle: switch to pinconf-single
* Drew Fustini <drew@...7.com> [210826 01:20]:
> Switch the compatible for the am33xx_pinmux pin controller node from
> pinctrl-single to pinconf-single. The only change between these two
> compatibles is that PCS_HAS_PINCONF will be true. This then allows
> pinconf properties to be utilized.
>
> The purpose of this change is to allow the PocketBeagle to use:
>
> pinctrl-single,bias-pullup
> pinctrl-single,bias-pulldown
>
> This dts already defines these properites for gpio pins in the default
> pinctrl state but it has no effect unless PCS_HAS_PINCONF is set.
>
> The bias properties can then be modified on the corresponding gpio lines
> through the gpiod uapi. The mapping between the pins and gpio lines is
> defined by gpio-ranges under the gpio controller nodes in am33xx-l4.dtsi
Thanks applying into omap-for-v5.16/dt.
Tony
Powered by blists - more mailing lists