| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <ec40bd7128a30e93b90ba888f3468f394617a010.1633520807.git.cdleonard@gmail.com>
Date: Wed, 6 Oct 2021 14:47:24 +0300
From: Leonard Crestez <cdleonard@...il.com>
To: Jakub Kicinski <kuba@...nel.org>, Shuah Khan <shuah@...nel.org>,
David Ahern <dsahern@...nel.org>
Cc: "David S. Miller" <davem@...emloft.net>,
Ido Schimmel <idosch@...dia.com>,
Seth David Schoen <schoen@...alty.org>,
netdev@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 08/11] selftests: net/fcnal: Replace sleep after server start with -k
The -k switch makes the server fork into the background after the listen
call is succesful, this can be used to replace most of the `sleep 1`
statements in this script.
Change performed with a vim command:
s/nettest \(.*-s.*\) &\n\s*sleep 1\n/nettest \1 -k\r
Signed-off-by: Leonard Crestez <cdleonard@...il.com>
---
tools/testing/selftests/net/fcnal-test.sh | 641 ++++++++--------------
1 file changed, 219 insertions(+), 422 deletions(-)
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index 09cb35e16219..e73aeb3884c5 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -804,63 +804,56 @@ ipv4_tcp_md5_novrf()
# single address
#
# basic use case
log_start
- run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: Single address config"
# client sends MD5, server not configured
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Server no config, client uses password"
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -M ${MD5_PW} -m ${NSB_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
# client from different address
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} &
- sleep 1
+ run_cmd nettest -s -M ${MD5_PW} -m ${NSB_LO_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
#
# MD5 extension - prefix length
#
# client in prefix
log_start
- run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: Prefix config"
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Prefix config, client uses wrong password"
# client outside of prefix
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -M ${MD5_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
#
@@ -872,127 +865,112 @@ ipv4_tcp_md5()
# single address
#
# basic use case
log_start
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
# client sends MD5, server not configured
log_start
show_hint "Should timeout since server does not have MD5 auth"
- run_cmd nettest -s -I ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
#
# MD5 extension - prefix length
#
# client in prefix
log_start
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
# client outside of prefix
log_start
show_hint "Should timeout since client address is outside of prefix"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -c ${NSB_LO_IP} -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
#
# duplicate config between default VRF and a VRF
#
log_start
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} -k
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} -k
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NSB_IP} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} -k
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} -k
run_cmd_nsc nettest -r ${NSA_IP} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} &
- run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET} -k
+ run_cmd nettest -s -M ${MD5_WRONG_PW} -m ${NS_NET} -k
run_cmd_nsb nettest -r ${NSA_IP} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
#
# negative tests
@@ -1015,20 +993,18 @@ ipv4_tcp_novrf()
# server tests
#
for a in ${NSA_IP} ${NSA_LO_IP}
do
log_start
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Global server"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
# verify TCP reset sent and received
for a in ${NSA_IP} ${NSA_LO_IP}
@@ -1043,18 +1019,16 @@ ipv4_tcp_novrf()
# client
#
for a in ${NSB_IP} ${NSB_LO_IP}
do
log_start
- run_cmd_nsb nettest -s &
- sleep 1
+ run_cmd_nsb nettest -s -k
run_cmd nettest -r ${a} -0 ${NSA_IP}
log_test_addr ${a} $? 0 "Client"
log_start
- run_cmd_nsb nettest -s &
- sleep 1
+ run_cmd_nsb nettest -s -k
run_cmd nettest -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 0 "Client, device bind"
log_start
show_hint "Should fail 'Connection refused'"
@@ -1071,54 +1045,48 @@ ipv4_tcp_novrf()
# local address tests
#
for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd nettest -r ${a} -0 ${a} -1 ${a}
log_test_addr ${a} $? 0 "Global server, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -k
run_cmd nettest -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
for a in ${NSA_LO_IP} 127.0.0.1
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -s -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -k
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd nettest -r ${a} -0 ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 0 "Global server, device client, local connection"
for a in ${NSA_LO_IP} 127.0.0.1
do
log_start
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd nettest -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, device client, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
log_start
show_hint "Should fail 'Connection refused'"
@@ -1142,24 +1110,21 @@ ipv4_tcp_vrf()
#
for a in ${NSA_IP} ${VRF_IP}
do
log_start
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 1 "Global server"
log_start
- run_cmd nettest -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
# verify TCP reset received
log_start
@@ -1171,12 +1136,11 @@ ipv4_tcp_vrf()
# local address tests
# (${VRF_IP} and 127.0.0.1 both timeout)
a=${NSA_IP}
log_start
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd nettest -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, local connection"
# run MD5 tests
ipv4_tcp_md5
@@ -1189,19 +1153,17 @@ ipv4_tcp_vrf()
for a in ${NSA_IP} ${VRF_IP}
do
log_start
show_hint "client socket should be bound to VRF"
- run_cmd nettest -s -3 ${VRF} &
- sleep 1
+ run_cmd nettest -s -3 ${VRF} -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
show_hint "client socket should be bound to VRF"
- run_cmd nettest -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "VRF server"
# verify TCP reset received
log_start
@@ -1211,40 +1173,36 @@ ipv4_tcp_vrf()
done
a=${NSA_IP}
log_start
show_hint "client socket should be bound to device"
- run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 0 "Device server"
# local address tests
for a in ${NSA_IP} ${VRF_IP}
do
log_start
show_hint "Should fail 'Connection refused' since client is not bound to VRF"
- run_cmd nettest -s -I ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -k
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "Global server, local connection"
done
#
# client
#
for a in ${NSB_IP} ${NSB_LO_IP}
do
log_start
- run_cmd_nsb nettest -s &
- sleep 1
+ run_cmd_nsb nettest -s -k
run_cmd nettest -r ${a} -d ${VRF}
log_test_addr ${a} $? 0 "Client, VRF bind"
log_start
- run_cmd_nsb nettest -s &
- sleep 1
+ run_cmd_nsb nettest -s -k
run_cmd nettest -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 0 "Client, device bind"
log_start
show_hint "Should fail 'Connection refused'"
@@ -1258,39 +1216,34 @@ ipv4_tcp_vrf()
done
for a in ${NSA_IP} ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} -k
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -3 ${VRF} -k
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
log_start
show_hint "Should fail 'No route to host' since client is out of VRF scope"
- run_cmd nettest -s -I ${VRF} &
- sleep 1
+ run_cmd nettest -s -I ${VRF} -k
run_cmd nettest -r ${a}
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start
- run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
log_start
- run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
}
ipv4_tcp()
@@ -1324,12 +1277,11 @@ ipv4_udp_novrf()
# server tests
#
for a in ${NSA_IP} ${NSA_LO_IP}
do
log_start
- run_cmd nettest -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
show_hint "Should fail 'Connection refused' since there is no server"
@@ -1337,41 +1289,36 @@ ipv4_udp_novrf()
log_test_addr ${a} $? 1 "No server"
done
a=${NSA_IP}
log_start
- run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Device server"
#
# client
#
for a in ${NSB_IP} ${NSB_LO_IP}
do
log_start
- run_cmd_nsb nettest -D -s &
- sleep 1
+ run_cmd_nsb nettest -D -s -k
run_cmd nettest -D -r ${a} -0 ${NSA_IP}
log_test_addr ${a} $? 0 "Client"
log_start
- run_cmd_nsb nettest -D -s &
- sleep 1
+ run_cmd_nsb nettest -D -s -k
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP}
log_test_addr ${a} $? 0 "Client, device bind"
log_start
- run_cmd_nsb nettest -D -s &
- sleep 1
+ run_cmd_nsb nettest -D -s -k
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP}
log_test_addr ${a} $? 0 "Client, device send via cmsg"
log_start
- run_cmd_nsb nettest -D -s &
- sleep 1
+ run_cmd_nsb nettest -D -s -k
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP}
log_test_addr ${a} $? 0 "Client, device bind via IP_UNICAST_IF"
log_start
show_hint "Should fail 'Connection refused'"
@@ -1388,83 +1335,73 @@ ipv4_udp_novrf()
# local address tests
#
for a in ${NSA_IP} ${NSA_LO_IP} 127.0.0.1
do
log_start
- run_cmd nettest -D -s &
- sleep 1
+ run_cmd nettest -D -s -k
run_cmd nettest -D -r ${a} -0 ${a} -1 ${a}
log_test_addr ${a} $? 0 "Global server, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -D -r ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
for a in ${NSA_LO_IP} 127.0.0.1
do
log_start
show_hint "Should fail 'Connection refused' since address is out of device scope"
- run_cmd nettest -s -D -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${NSA_DEV} -k
run_cmd nettest -D -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -D &
- sleep 1
+ run_cmd nettest -s -D -k
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Global server, device client, local connection"
log_start
- run_cmd nettest -s -D &
- sleep 1
+ run_cmd nettest -s -D -k
run_cmd nettest -D -d ${NSA_DEV} -C -r ${a}
log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
log_start
- run_cmd nettest -s -D &
- sleep 1
+ run_cmd nettest -s -D -k
run_cmd nettest -D -d ${NSA_DEV} -S -r ${a}
log_test_addr ${a} $? 0 "Global server, device client via IP_UNICAST_IF, local connection"
# IPv4 with device bind has really weird behavior - it overrides the
# fib lookup, generates an rtable and tries to send the packet. This
# causes failures for local traffic at different places
for a in ${NSA_LO_IP} 127.0.0.1
do
log_start
show_hint "Should fail since addresses on loopback are out of device scope"
- run_cmd nettest -D -s &
- sleep 1
+ run_cmd nettest -D -s -k
run_cmd nettest -D -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 2 "Global server, device client, local connection"
log_start
show_hint "Should fail since addresses on loopback are out of device scope"
- run_cmd nettest -D -s &
- sleep 1
+ run_cmd nettest -D -s -k
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -C
log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
log_start
show_hint "Should fail since addresses on loopback are out of device scope"
- run_cmd nettest -D -s &
- sleep 1
+ run_cmd nettest -D -s -k
run_cmd nettest -D -r ${a} -d ${NSA_DEV} -S
log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
log_start
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
@@ -1484,63 +1421,55 @@ ipv4_udp_vrf()
#
for a in ${NSA_IP} ${VRF_IP}
do
log_start
show_hint "Fails because ingress is in a VRF and global server is disabled"
- run_cmd nettest -D -s &
- sleep 1
+ run_cmd nettest -D -s -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 1 "Global server"
log_start
- run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
log_start
show_hint "Should fail 'Connection refused' since there is no server"
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 1 "No server"
log_start
show_hint "Should fail 'Connection refused' since global server is out of scope"
- run_cmd nettest -D -s &
- sleep 1
+ run_cmd nettest -D -s -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 1 "Global server, VRF client, local connection"
done
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, enslaved device client, local connection"
a=${NSA_IP}
log_start
- run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
# enable global server
log_subsection "Global server enabled"
@@ -1550,24 +1479,21 @@ ipv4_udp_vrf()
# server tests
#
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
log_start
- run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
log_start
show_hint "Should fail 'Connection refused'"
@@ -1577,18 +1503,16 @@ ipv4_udp_vrf()
#
# client tests
#
log_start
- run_cmd_nsb nettest -D -s &
- sleep 1
+ run_cmd_nsb nettest -D -s -k
run_cmd nettest -d ${VRF} -D -r ${NSB_IP} -1 ${NSA_IP}
log_test $? 0 "VRF client"
log_start
- run_cmd_nsb nettest -D -s &
- sleep 1
+ run_cmd_nsb nettest -D -s -k
run_cmd nettest -d ${NSA_DEV} -D -r ${NSB_IP} -1 ${NSA_IP}
log_test $? 0 "Enslaved device client"
# negative test - should fail
log_start
@@ -1604,53 +1528,46 @@ ipv4_udp_vrf()
#
# local address tests
#
a=${NSA_IP}
log_start
- run_cmd nettest -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -D -s -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${VRF} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -s -D -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
for a in ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -D -s -3 ${VRF} &
- sleep 1
+ run_cmd nettest -D -s -3 ${VRF} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
done
for a in ${VRF_IP} 127.0.0.1
do
log_start
- run_cmd nettest -s -D -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -s -D -I ${VRF} -3 ${VRF} -k
run_cmd nettest -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
done
# negative test - should fail
@@ -1807,12 +1724,11 @@ ipv4_rt()
# server tests
#
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -s &
- sleep 1
+ run_cmd nettest ${varg} -s -k
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, global server"
@@ -1821,12 +1737,11 @@ ipv4_rt()
done
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -s -I ${VRF} &
- sleep 1
+ run_cmd nettest ${varg} -s -I ${VRF} -k
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF server"
@@ -1834,12 +1749,11 @@ ipv4_rt()
setup ${with_vrf}
done
a=${NSA_IP}
log_start
- run_cmd nettest ${varg} -s -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest ${varg} -s -I ${NSA_DEV} -k
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, enslaved device server"
@@ -1848,23 +1762,21 @@ ipv4_rt()
#
# client test
#
log_start
- run_cmd_nsb nettest ${varg} -s &
- sleep 1
+ run_cmd_nsb nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF client"
setup ${with_vrf}
log_start
- run_cmd_nsb nettest ${varg} -s &
- sleep 1
+ run_cmd_nsb nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, enslaved device client"
@@ -1875,12 +1787,11 @@ ipv4_rt()
# local address tests
#
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -s &
- sleep 1
+ run_cmd nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, global server, VRF client, local"
@@ -1889,12 +1800,11 @@ ipv4_rt()
done
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${varg} -I ${VRF} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${VRF} -s -k
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF server and client, local"
@@ -1902,34 +1812,31 @@ ipv4_rt()
setup ${with_vrf}
done
a=${NSA_IP}
log_start
- run_cmd nettest ${varg} -s &
- sleep 1
+ run_cmd nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, global server, enslaved device client, local"
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -I ${VRF} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${VRF} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF server, enslaved device client, local"
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -I ${NSA_DEV} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, enslaved device server and client, local"
@@ -2268,63 +2175,56 @@ ipv6_tcp_md5_novrf()
# single address
#
# basic use case
log_start
- run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: Single address config"
# client sends MD5, server not configured
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Server no config, client uses password"
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Client uses wrong password"
# client from different address
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NSB_LO_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Client address does not match address configured with password"
#
# MD5 extension - prefix length
#
# client in prefix
log_start
- run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: Prefix config"
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: Prefix config, client uses wrong password"
# client outside of prefix
log_start
show_hint "Should timeout due to MD5 mismatch"
- run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -M ${MD5_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: Prefix config, client address not in configured prefix"
}
#
@@ -2336,127 +2236,112 @@ ipv6_tcp_md5()
# single address
#
# basic use case
log_start
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config"
# client sends MD5, server not configured
log_start
show_hint "Should timeout since server does not have MD5 auth"
- run_cmd nettest -6 -s -I ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Server no config, client uses password"
# wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Client uses wrong password"
# client from different address
log_start
show_hint "Should timeout since server config differs from client"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_LO_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Client address does not match address configured with password"
#
# MD5 extension - prefix length
#
# client in prefix
log_start
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config"
# client in prefix, wrong password
log_start
show_hint "Should timeout since client uses wrong password"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config, client uses wrong password"
# client outside of prefix
log_start
show_hint "Should timeout since client address is outside of prefix"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -c ${NSB_LO_IP6} -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config, client address not in configured prefix"
#
# duplicate config between default VRF and a VRF
#
log_start
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} -k
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF"
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} -k
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NSB_IP6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NSB_IP6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Single address config in default VRF and VRF, conn in VRF with default VRF pw"
log_start
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF"
log_start
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} -k
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 0 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF"
log_start
show_hint "Should timeout since client in default VRF uses VRF password"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} -k
run_cmd_nsc nettest -6 -r ${NSA_IP6} -X ${MD5_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in default VRF with VRF pw"
log_start
show_hint "Should timeout since client in VRF uses default VRF password"
- run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} &
- run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -M ${MD5_PW} -m ${NS_NET6} -k
+ run_cmd nettest -6 -s -M ${MD5_WRONG_PW} -m ${NS_NET6} -k
run_cmd_nsb nettest -6 -r ${NSA_IP6} -X ${MD5_WRONG_PW}
log_test $? 2 "MD5: VRF: Prefix config in default VRF and VRF, conn in VRF with default VRF pw"
#
# negative tests
@@ -2479,12 +2364,11 @@ ipv6_tcp_novrf()
# server tests
#
for a in ${NSA_IP6} ${NSA_LO_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
done
# verify TCP reset received
@@ -2500,21 +2384,19 @@ ipv6_tcp_novrf()
# client
#
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
do
log_start
- run_cmd_nsb nettest -6 -s &
- sleep 1
+ run_cmd_nsb nettest -6 -s -k
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Client"
done
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
do
log_start
- run_cmd_nsb nettest -6 -s &
- sleep 1
+ run_cmd_nsb nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 0 "Client, device bind"
done
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
@@ -2529,55 +2411,49 @@ ipv6_tcp_novrf()
# local address tests
#
for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
do
log_start
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server, local connection"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -6 -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
for a in ${NSA_LO_IP6} ::1
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -s -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -k
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Device server, unbound client, local connection"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Global server, device client, local connection"
for a in ${NSA_LO_IP6} ::1
do
log_start
show_hint "Should fail 'Connection refused' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, device client, local connection"
done
for a in ${NSA_IP6} ${NSA_LINKIP6}
do
log_start
- run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -6 -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
done
for a in ${NSA_IP6} ${NSA_LINKIP6}
@@ -2605,38 +2481,34 @@ ipv6_tcp_vrf()
#
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Global server"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
done
# link local is always bound to ingress device
a=${NSA_LINKIP6}%${NSB_DEV}
log_start
- run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
for a in ${NSA_IP6} ${VRF_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Device server"
done
# verify TCP reset received
@@ -2650,12 +2522,11 @@ ipv6_tcp_vrf()
# local address tests
a=${NSA_IP6}
log_start
show_hint "Should fail 'Connection refused' since global server with VRF is disabled"
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, local connection"
# run MD5 tests
ipv6_tcp_md5
@@ -2667,44 +2538,39 @@ ipv6_tcp_vrf()
set_sysctl net.ipv4.tcp_l3mdev_accept=1
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -3 ${VRF} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
done
# For LLA, child socket is bound to device
a=${NSA_LINKIP6}%${NSB_DEV}
log_start
- run_cmd nettest -6 -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "VRF server"
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 0 "Device server"
done
# verify TCP reset received
@@ -2719,12 +2585,11 @@ ipv6_tcp_vrf()
# local address tests
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
show_hint "Fails 'Connection refused' since client is not in VRF"
- run_cmd nettest -6 -s -I ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -k
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Global server, local connection"
done
@@ -2732,29 +2597,26 @@ ipv6_tcp_vrf()
# client
#
for a in ${NSB_IP6} ${NSB_LO_IP6}
do
log_start
- run_cmd_nsb nettest -6 -s &
- sleep 1
+ run_cmd_nsb nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${VRF}
log_test_addr ${a} $? 0 "Client, VRF bind"
done
a=${NSB_LINKIP6}
log_start
show_hint "Fails since VRF device does not allow linklocal addresses"
- run_cmd_nsb nettest -6 -s &
- sleep 1
+ run_cmd_nsb nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${VRF}
log_test_addr ${a} $? 1 "Client, VRF bind"
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}
do
log_start
- run_cmd_nsb nettest -6 -s &
- sleep 1
+ run_cmd_nsb nettest -6 -s -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 0 "Client, device bind"
done
for a in ${NSB_IP6} ${NSB_LO_IP6}
@@ -2774,42 +2636,37 @@ ipv6_tcp_vrf()
done
for a in ${NSA_IP6} ${VRF_IP6} ::1
do
log_start
- run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} -k
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local connection"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -3 ${VRF} -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local connection"
a=${NSA_IP6}
log_start
show_hint "Should fail since unbound client is out of VRF scope"
- run_cmd nettest -6 -s -I ${VRF} &
- sleep 1
+ run_cmd nettest -6 -s -I ${VRF} -k
run_cmd nettest -6 -r ${a}
log_test_addr ${a} $? 1 "VRF server, unbound client, local connection"
log_start
- run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -6 -r ${a} -d ${VRF} -0 ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local connection"
for a in ${NSA_IP6} ${NSA_LINKIP6}
do
log_start
- run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -6 -r ${a} -d ${NSA_DEV} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local connection"
done
}
@@ -2844,26 +2701,23 @@ ipv6_udp_novrf()
# server tests
#
for a in ${NSA_IP6} ${NSA_LINKIP6}%${NSB_DEV}
do
log_start
- run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Device server"
done
a=${NSA_LO_IP6}
log_start
- run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
# should fail since loopback address is out of scope for a device
# bound server, but it does not - hence this is more documenting
@@ -2888,30 +2742,26 @@ ipv6_udp_novrf()
# client
#
for a in ${NSB_IP6} ${NSB_LO_IP6} ${NSB_LINKIP6}%${NSA_DEV}
do
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -0 ${NSA_IP6}
log_test_addr ${a} $? 0 "Client"
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -0 ${NSA_IP6}
log_test_addr ${a} $? 0 "Client, device bind"
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C -0 ${NSA_IP6}
log_test_addr ${a} $? 0 "Client, device send via cmsg"
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S -0 ${NSA_IP6}
log_test_addr ${a} $? 0 "Client, device bind via IPV6_UNICAST_IF"
log_start
show_hint "Should fail 'Connection refused'"
@@ -2928,80 +2778,70 @@ ipv6_udp_novrf()
# local address tests
#
for a in ${NSA_IP6} ${NSA_LO_IP6} ::1
do
log_start
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -0 ${a} -1 ${a}
log_test_addr ${a} $? 0 "Global server, local connection"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -D -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Device server, unbound client, local connection"
for a in ${NSA_LO_IP6} ::1
do
log_start
show_hint "Should fail 'Connection refused' since address is out of device scope"
- run_cmd nettest -6 -s -D -I ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -s -D -I ${NSA_DEV} -k
run_cmd nettest -6 -D -r ${a}
log_test_addr ${a} $? 1 "Device server, local connection"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -s -D &
- sleep 1
+ run_cmd nettest -6 -s -D -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Global server, device client, local connection"
log_start
- run_cmd nettest -6 -s -D &
- sleep 1
+ run_cmd nettest -6 -s -D -k
run_cmd nettest -6 -D -d ${NSA_DEV} -C -r ${a}
log_test_addr ${a} $? 0 "Global server, device send via cmsg, local connection"
log_start
- run_cmd nettest -6 -s -D &
- sleep 1
+ run_cmd nettest -6 -s -D -k
run_cmd nettest -6 -D -d ${NSA_DEV} -S -r ${a}
log_test_addr ${a} $? 0 "Global server, device client via IPV6_UNICAST_IF, local connection"
for a in ${NSA_LO_IP6} ::1
do
log_start
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV}
log_test_addr ${a} $? 1 "Global server, device client, local connection"
log_start
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -C
log_test_addr ${a} $? 1 "Global server, device send via cmsg, local connection"
log_start
show_hint "Should fail 'No route to host' since addresses on loopback are out of device scope"
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -r ${a} -d ${NSA_DEV} -S
log_test_addr ${a} $? 1 "Global server, device client via IP_UNICAST_IF, local connection"
done
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -s -I ${NSA_DEV} -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a} -0 ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
log_start
show_hint "Should fail 'Connection refused'"
@@ -3010,12 +2850,11 @@ ipv6_udp_novrf()
# LLA to GUA
run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV}
log_start
- run_cmd nettest -6 -s -D &
- sleep 1
+ run_cmd nettest -6 -s -D -k
run_cmd_nsb nettest -6 -D -r ${NSA_IP6}
log_test $? 0 "UDP in - LLA to GUA"
run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV}
run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV}
@@ -3034,30 +2873,27 @@ ipv6_udp_vrf()
#
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
show_hint "Should fail 'Connection refused' since global server is disabled"
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 1 "Global server"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
done
# negative test - should fail
@@ -3074,48 +2910,42 @@ ipv6_udp_vrf()
#
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
show_hint "Should fail 'Connection refused' since global server is disabled"
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 1 "Global server, VRF client, local conn"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -I ${VRF} -s &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
done
a=${NSA_IP6}
log_start
show_hint "Should fail 'Connection refused' since global server is disabled"
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 1 "Global server, device client, local conn"
log_start
- run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server, device client, local conn"
# disable global server
log_subsection "Global server enabled"
@@ -3125,30 +2955,27 @@ ipv6_udp_vrf()
# server tests
#
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Global server"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "VRF server"
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd_nsb nettest -6 -D -r ${a}
log_test_addr ${a} $? 0 "Enslaved device server"
done
# negative test - should fail
@@ -3161,23 +2988,21 @@ ipv6_udp_vrf()
#
# client tests
#
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6}
log_test $? 0 "VRF client"
# negative test - should fail
log_start
run_cmd nettest -6 -D -d ${VRF} -r ${NSB_IP6}
log_test $? 1 "No server, VRF client"
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_IP6}
log_test $? 0 "Enslaved device client"
# negative test - should fail
log_start
@@ -3187,32 +3012,28 @@ ipv6_udp_vrf()
#
# local address tests
#
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
#log_start
- run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
a=${VRF_IP6}
log_start
- run_cmd nettest -6 -D -s -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -D -s -3 ${VRF} -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Global server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${VRF} -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "VRF server, VRF client, local conn"
# negative test - should fail
for a in ${NSA_IP6} ${VRF_IP6}
@@ -3223,64 +3044,57 @@ ipv6_udp_vrf()
done
# device to global IP
a=${NSA_IP6}
log_start
- run_cmd nettest -6 -D -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Global server, device client, local conn"
log_start
- run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${VRF} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "VRF server, device client, local conn"
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${VRF} -r ${a}
log_test_addr ${a} $? 0 "Device server, VRF client, local conn"
log_start
- run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} &
- sleep 1
+ run_cmd nettest -6 -D -I ${NSA_DEV} -s -3 ${NSA_DEV} -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 0 "Device server, device client, local conn"
log_start
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${a}
log_test_addr ${a} $? 1 "No server, device client, local conn"
# link local addresses
log_start
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6}
log_test $? 0 "Global server, linklocal IP"
log_start
run_cmd_nsb nettest -6 -D -d ${NSB_DEV} -r ${NSA_LINKIP6}
log_test $? 1 "No server, linklocal IP"
log_start
- run_cmd_nsb nettest -6 -D -s &
- sleep 1
+ run_cmd_nsb nettest -6 -D -s -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6}
log_test $? 0 "Enslaved device client, linklocal IP"
log_start
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSB_LINKIP6}
log_test $? 1 "No server, device client, peer linklocal IP"
log_start
- run_cmd nettest -6 -D -s &
- sleep 1
+ run_cmd nettest -6 -D -s -k
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6}
log_test $? 0 "Enslaved device client, local conn - linklocal IP"
log_start
run_cmd nettest -6 -D -d ${NSA_DEV} -r ${NSA_LINKIP6}
@@ -3288,12 +3102,11 @@ ipv6_udp_vrf()
# LLA to GUA
run_cmd_nsb ip -6 addr del ${NSB_IP6}/64 dev ${NSB_DEV}
run_cmd_nsb ip -6 ro add ${NSA_IP6}/128 dev ${NSB_DEV}
log_start
- run_cmd nettest -6 -s -D &
- sleep 1
+ run_cmd nettest -6 -s -D -k
run_cmd_nsb nettest -6 -D -r ${NSA_IP6}
log_test $? 0 "UDP in - LLA to GUA"
run_cmd_nsb ip -6 ro del ${NSA_IP6}/128 dev ${NSB_DEV}
run_cmd_nsb ip -6 addr add ${NSB_IP6}/64 dev ${NSB_DEV}
@@ -3443,12 +3256,11 @@ ipv6_rt()
# server tests
#
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -s &
- sleep 1
+ run_cmd nettest ${varg} -s -k
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, global server"
@@ -3457,12 +3269,11 @@ ipv6_rt()
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -I ${VRF} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${VRF} -s -k
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF server"
@@ -3471,12 +3282,11 @@ ipv6_rt()
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -I ${NSA_DEV} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s -k
run_cmd_nsb nettest ${varg} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, enslaved device server"
@@ -3486,23 +3296,21 @@ ipv6_rt()
#
# client test
#
log_start
- run_cmd_nsb nettest ${varg} -s &
- sleep 1
+ run_cmd_nsb nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${VRF} -r ${NSB_IP6} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test 0 0 "${desc}, VRF client"
setup ${with_vrf}
log_start
- run_cmd_nsb nettest ${varg} -s &
- sleep 1
+ run_cmd_nsb nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${NSB_IP6} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test 0 0 "${desc}, enslaved device client"
@@ -3514,12 +3322,11 @@ ipv6_rt()
# local address tests
#
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -s &
- sleep 1
+ run_cmd nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, global server, VRF client"
@@ -3528,12 +3335,11 @@ ipv6_rt()
done
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest ${varg} -I ${VRF} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${VRF} -s -k
run_cmd nettest ${varg} -d ${VRF} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF server and client"
@@ -3541,34 +3347,31 @@ ipv6_rt()
setup ${with_vrf}
done
a=${NSA_IP6}
log_start
- run_cmd nettest ${varg} -s &
- sleep 1
+ run_cmd nettest ${varg} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, global server, device client"
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -I ${VRF} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${VRF} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, VRF server, device client"
setup ${with_vrf}
log_start
- run_cmd nettest ${varg} -I ${NSA_DEV} -s &
- sleep 1
+ run_cmd nettest ${varg} -I ${NSA_DEV} -s -k
run_cmd nettest ${varg} -d ${NSA_DEV} -r ${a} &
sleep 3
run_cmd ip link del ${VRF}
sleep 1
log_test_addr ${a} 0 0 "${desc}, device server, device client"
@@ -3622,12 +3425,11 @@ netfilter_tcp_reset()
local a
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest -s &
- sleep 1
+ run_cmd nettest -s -k
run_cmd_nsb nettest -r ${a}
log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx"
done
}
@@ -3640,12 +3442,11 @@ netfilter_icmp()
[ "${stype}" = "UDP" ] && arg="-D"
for a in ${NSA_IP} ${VRF_IP}
do
log_start
- run_cmd nettest ${arg} -s &
- sleep 1
+ run_cmd nettest ${arg} -s -k
run_cmd_nsb nettest ${arg} -r ${a}
log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach"
done
}
@@ -3679,12 +3480,11 @@ netfilter_tcp6_reset()
local a
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s &
- sleep 1
+ run_cmd nettest -6 -s -k
run_cmd_nsb nettest -6 -r ${a}
log_test_addr ${a} $? 1 "Global server, reject with TCP-reset on Rx"
done
}
@@ -3697,12 +3497,11 @@ netfilter_icmp6()
[ "${stype}" = "UDP" ] && arg="$arg -D"
for a in ${NSA_IP6} ${VRF_IP6}
do
log_start
- run_cmd nettest -6 -s ${arg} &
- sleep 1
+ run_cmd nettest -6 -s ${arg} -k
run_cmd_nsb nettest -6 ${arg} -r ${a}
log_test_addr ${a} $? 1 "Global ${stype} server, Rx reject icmp-port-unreach"
done
}
@@ -3893,17 +3692,15 @@ use_case_snat_on_vrf()
local port="12345"
run_cmd iptables -t nat -A POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP} -o ${VRF}
run_cmd ip6tables -t nat -A POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP6} -o ${VRF}
- run_cmd_nsb nettest -s -l ${NSB_IP} -p ${port} &
- sleep 1
+ run_cmd_nsb nettest -s -l ${NSB_IP} -p ${port} -k
run_cmd nettest -d ${VRF} -r ${NSB_IP} -p ${port}
log_test $? 0 "IPv4 TCP connection over VRF with SNAT"
- run_cmd_nsb nettest -6 -s -l ${NSB_IP6} -p ${port} &
- sleep 1
+ run_cmd_nsb nettest -6 -s -l ${NSB_IP6} -p ${port} -k
run_cmd nettest -6 -d ${VRF} -r ${NSB_IP6} -p ${port}
log_test $? 0 "IPv6 TCP connection over VRF with SNAT"
# Cleanup
run_cmd iptables -t nat -D POSTROUTING -p tcp -m tcp --dport ${port} -j SNAT --to-source ${NSA_LO_IP} -o ${VRF}
--
2.25.1
Powered by blists - more mailing lists