linux-kernel - [PATCH v2 3/4] ASoC: Intel: bytcr_rt5651: use devm_clk_get

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211007170250.27997-4-andriy.shevchenko@linux.intel.com>
Date:   Thu,  7 Oct 2021 20:02:49 +0300
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Mark Brown <broonie@...nel.org>, alsa-devel@...a-project.org,
        linux-kernel@...r.kernel.org
Cc:     Cezary Rojewski <cezary.rojewski@...el.com>,
        Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
        Liam Girdwood <liam.r.girdwood@...ux.intel.com>,
        Jie Yang <yang.jie@...ux.intel.com>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v2 3/4] ASoC: Intel: bytcr_rt5651: use devm_clk_get_optional() for mclk

The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 sound/soc/intel/boards/bytcr_rt5651.c | 69 ++++++++++++---------------
 1 file changed, 30 insertions(+), 39 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 36f63516f0cb..28c561302e69 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -188,13 +188,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 	}
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
-		if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-			ret = clk_prepare_enable(priv->mclk);
-			if (ret < 0) {
-				dev_err(card->dev,
-					"could not configure MCLK state");
-				return ret;
-			}
+		ret = clk_prepare_enable(priv->mclk);
+		if (ret < 0) {
+			dev_err(card->dev, "could not configure MCLK state");
+			return ret;
 		}
 		ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50);
 	} else {
@@ -207,8 +204,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 					     48000 * 512,
 					     SND_SOC_CLOCK_IN);
 		if (!ret)
-			if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN)
-				clk_disable_unprepare(priv->mclk);
+			clk_disable_unprepare(priv->mclk);
 	}
 
 	if (ret < 0) {
@@ -629,29 +625,25 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 		return ret;
 	}
 
-	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		/*
-		 * The firmware might enable the clock at
-		 * boot (this information may or may not
-		 * be reflected in the enable clock register).
-		 * To change the rate we must disable the clock
-		 * first to cover these cases. Due to common
-		 * clock framework restrictions that do not allow
-		 * to disable a clock that has not been enabled,
-		 * we need to enable the clock first.
-		 */
-		ret = clk_prepare_enable(priv->mclk);
-		if (!ret)
-			clk_disable_unprepare(priv->mclk);
+	/*
+	 * The firmware might enable the clock at boot (this information
+	 * may or may not be reflected in the enable clock register).
+	 * To change the rate we must disable the clock first to cover
+	 * these cases. Due to common clock framework restrictions that
+	 * do not allow to disable a clock that has not been enabled,
+	 * we need to enable the clock first.
+	 */
+	ret = clk_prepare_enable(priv->mclk);
+	if (!ret)
+		clk_disable_unprepare(priv->mclk);
 
-		if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
-			ret = clk_set_rate(priv->mclk, 25000000);
-		else
-			ret = clk_set_rate(priv->mclk, 19200000);
+	if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
+		ret = clk_set_rate(priv->mclk, 25000000);
+	else
+		ret = clk_set_rate(priv->mclk, 19200000);
 
-		if (ret)
-			dev_err(card->dev, "unable to set MCLK rate\n");
-	}
+	if (ret)
+		dev_err(card->dev, "unable to set MCLK rate\n");
 
 	report = 0;
 	if (BYT_RT5651_JDSRC(byt_rt5651_quirk))
@@ -1064,21 +1056,20 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
 
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
-		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
+		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
 			ret_val = PTR_ERR(priv->mclk);
 			dev_err(dev,
 				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
 				ret_val);
-			/*
-			 * Fall back to bit clock usage for -ENOENT (clock not
-			 * available likely due to missing dependencies), bail
-			 * for all other errors, including -EPROBE_DEFER
-			 */
-			if (ret_val != -ENOENT)
-				goto err;
-			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
+			goto err;
 		}
+		/*
+		 * Fall back to bit clock usage when clock is not
+		 * available likely due to missing dependencies.
+		 */
+		if (!priv->mclk)
+			byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN;
 	}
 
 	snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),
-- 
2.33.0