Message-ID: <20211007201722.51e0407a@penguin.lxd>
Date:   Thu, 7 Oct 2021 20:17:22 +0300
From:   Denis Pauk <pauk.denis@...il.com>
To:     Guenter Roeck <linux@...ck-us.net>
Cc:     andy.shevchenko@...il.com,
        Eugene Shalygin <eugene.shalygin@...il.com>,
        Jean Delvare <jdelvare@...e.com>, linux-kernel@...r.kernel.org,
        linux-hwmon@...r.kernel.org
Subject: Re: [PATCH v2 2/3] hwmon: (asus_wmi_ec_sensors) Support B550 Asus
 WMI.

On Thu, 7 Oct 2021 09:41:30 -0700
Guenter Roeck <linux@...ck-us.net> wrote:

> On 10/6/21 3:25 PM, Denis Pauk wrote:
> > Linux HWMON sensors driver for ASUS motherboards to read
> > sensors from the embedded controller.
> > 
> > Many ASUS motherboards do not publish all the available
> > sensors via the Super I/O chip but the missing ones are
> > available through the embedded controller (EC) registers.
> > 
> > This driver implements reading those sensor data via the
> > WMI method BREC, which is known to be present in all ASUS
> > motherboards based on the AMD 500 series chipsets (and
> > probably is available in other models too). The driver
> > needs to know exact register addresses for the sensors and
> > thus support for each motherboard has to be added explicitly.
> > 
> > The EC registers do not provide critical values for the
> > sensors and as such they are not published to the HWMON.
> > 
> > Supported motherboards:
> > * ROG CROSSHAIR VIII HERO
> > * ROG CROSSHAIR VIII DARK HERO
> > * ROG CROSSHAIR VIII FORMULA
> > * ROG STRIX X570-E GAMING
> > * ROG STRIX B550-E GAMING
> > 
> > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
> > Signed-off-by: Denis Pauk <pauk.denis@...il.com>
> > Co-developed-by: Eugene Shalygin <eugene.shalygin@...il.com>
> > Signed-off-by: Eugene Shalygin <eugene.shalygin@...il.com>
> > 
> > ---
> > Changes in v2:
> >   - Use utf8s_to_utf16s/utf16s_to_utf8s instead handmade fuctions.
> >   - Use post increment.
> >   - Use get_unaligned* for convert values.
> >   - Use PTR_ERR_OR_ZERO.
> >   - Specify per-board sensors in a declarative way (by Eugene
> > Shalygin). ---
> >   MAINTAINERS                         |   7 +
> >   drivers/hwmon/Kconfig               |  13 +-
> >   drivers/hwmon/Makefile              |   1 +
> >   drivers/hwmon/asus_wmi_ec_sensors.c | 631
> > ++++++++++++++++++++++++++++ 4 files changed, 651 insertions(+), 1
> > deletion(-) create mode 100644 drivers/hwmon/asus_wmi_ec_sensors.c
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index bae3f62f548f..bc2e981a54e2 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -2937,6 +2937,13 @@ W:	http://acpi4asus.sf.net
> >   F:	drivers/platform/x86/asus*.c
> >   F:	drivers/platform/x86/eeepc*.c
> >   
> > +ASUS WMI HARDWARE MONITOR DRIVER
> > +M:	Eugene Shalygin <eugene.shalygin@...il.com>
> > +M:	Denis Pauk <pauk.denis@...il.com>
> > +L:	linux-hwmon@...r.kernel.org
> > +S:	Maintained
> > +F:	drivers/hwmon/asus_wmi_ec_sensors.c
> > +
> >   ASUS WIRELESS RADIO CONTROL DRIVER
> >   M:	João Paulo Rechi Vita <jprvita@...il.com>
> >   L:	platform-driver-x86@...r.kernel.org
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 7fde4c6e1e7f..b7107721a401 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1840,7 +1840,7 @@ config SENSORS_ADS7871
> >   
> >   config SENSORS_AMC6821
> >   	tristate "Texas Instruments AMC6821"
> > -	depends on I2C
> > +	depends on I2C  
> 
> Completely unrelated and unacceptable change.
> 
Yes, I will remove it.

Thank you. 
> >   	help
> >   	  If you say yes here you get support for the Texas
> > Instruments AMC6821 hardware monitoring chips.
> > @@ -2215,6 +2215,17 @@ config SENSORS_ATK0110
> >   	  This driver can also be built as a module. If so, the
> > module will be called asus_atk0110.
> >   
> > +config SENSORS_ASUS_WMI_EC
> > +	tristate "ASUS WMI B550/X570"
> > +	help
> > +	  If you say yes here you get support for the ACPI
> > embedded controller
> > +	  hardware monitoring interface found in B550/X570 ASUS
> > motherboards.
> > +	  This driver will provide readings of fans, voltages and
> > temperatures
> > +	  through the system firmware.
> > +
> > +	  This driver can also be built as a module. If so, the
> > module
> > +	  will be called asus_wmi_sensors_ec.
> > +
> >   endif # ACPI
> >   
> >   endif # HWMON
> > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> > index baee6a8d4dd1..aae2ff5c7335 100644
> > --- a/drivers/hwmon/Makefile
> > +++ b/drivers/hwmon/Makefile
> > @@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID)		+=
> > hwmon-vid.o # APCI drivers
> >   obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o
> >   obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
> > +obj-$(CONFIG_SENSORS_ASUS_WMI_EC)	+= asus_wmi_ec_sensors.o
> >   
> >   # Native drivers
> >   # asb100, then w83781d go first, as they can override other
> > drivers' addresses. diff --git
> > a/drivers/hwmon/asus_wmi_ec_sensors.c
> > b/drivers/hwmon/asus_wmi_ec_sensors.c new file mode 100644 index
> > 000000000000..553d9ee8656d --- /dev/null
> > +++ b/drivers/hwmon/asus_wmi_ec_sensors.c
> > @@ -0,0 +1,631 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * HWMON driver for ASUS B550/X570 motherboards that publish sensor
> > + * values via the embedded controller registers.
> > + *
> > + * Copyright (C) 2021 Eugene Shalygin <eugene.shalygin@...il.com>
> > + * Copyright (C) 2018-2019 Ed Brindley <kernel@...davale.org>
> > + *
> > + * EC provided:
> > + * Chipset temperature,
> > + * CPU temperature,
> > + * Motherboard temperature,
> > + * T_Sensor temperature,
> > + * VRM  temperature,
> > + * Water In temperature,
> > + * Water Out temperature,
> > + * CPU Optional Fan,
> > + * Chipset fan,
> > + * Water Flow fan,
> > + * CPU current.
> > + *
> > + */
> > +#include <asm/unaligned.h>
> > +#include <linux/acpi.h>
> > +#include <linux/dmi.h>
> > +#include <linux/hwmon.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/init.h>
> > +#include <linux/jiffies.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/nls.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/units.h>
> > +#include <linux/wmi.h>
> > +
> > +#define ASUSWMI_MONITORING_GUID
> > "466747A0-70EC-11DE-8A39-0800200C9A66" +#define
> > ASUSWMI_METHODID_BLOCK_READ_EC		0x42524543 /* BREC */
> > + +#define ASUS_WMI_BLOCK_READ_REGISTERS_MAX 0x10 /* from the ASUS
> > DSDT source */ +/* from the ASUS_WMI_BLOCK_READ_REGISTERS_MAX value
> > */ +#define ASUS_WMI_MAX_BUF_LEN 0x80
> > +#define MAX_SENSOR_LABEL_LENGTH 0x10
> > +
> > +enum asus_wmi_ec_board {
> > +	BOARD_PW_X570_A, /* Pro WS X570-ACE */
> > +	BOARD_R_C8H, /* ROG Crosshair VIII Hero */
> > +	BOARD_R_C8DH, /* ROG Crosshair VIII Dark Hero */
> > +	BOARD_R_C8F, /* ROG Crosshair VIII Formula */
> > +	BOARD_RS_B550_E_G, /* ROG STRIX B550-E GAMING */
> > +	BOARD_RS_X570_E_G, /* ROG STRIX X570-E GAMING */
> > +	BOARD_MAX
> > +};
> > +
> > +/* boards with EC support */
> > +static const char *const asus_wmi_ec_boards_names[] = {
> > +	[BOARD_PW_X570_A] = "Pro WS X570-ACE",
> > +	[BOARD_R_C8H] = "ROG CROSSHAIR VIII HERO",
> > +	[BOARD_R_C8DH] = "ROG CROSSHAIR VIII DARK HERO",
> > +	[BOARD_R_C8F] = "ROG CROSSHAIR VIII FORMULA",
> > +	[BOARD_RS_B550_E_G] = "ROG STRIX B550-E GAMING",
> > +	[BOARD_RS_X570_E_G] = "ROG STRIX X570-E GAMING",
> > +};
> > +
> > +static u32 hwmon_attributes[] = {
> > +	[hwmon_chip] = HWMON_C_REGISTER_TZ,
> > +	[hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
> > +	[hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
> > +	[hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL,
> > +	[hwmon_fan] = HWMON_F_INPUT | HWMON_F_LABEL,
> > +};
> > +
> > +struct asus_wmi_ec_sensor_address {
> > +	u8 index;
> > +	u8 bank;
> > +	u8 size;
> > +};
> > +
> > +#define MAKE_SENSOR_ADDRESS(size_i, bank_i, index_i) \
> > +	{ .size = size_i,\
> > +	   .bank = bank_i,\
> > +	   .index = index_i}
> > +
> > +struct ec_sensor_info {
> > +	char label[MAX_SENSOR_LABEL_LENGTH];
> > +	enum hwmon_sensor_types type;
> > +	struct asus_wmi_ec_sensor_address addr;
> > +};
> > +
> > +#define EC_SENSOR(sensor_label, sensor_type, size, bank, index) \
> > +	{ .label = sensor_label,\
> > +	.type = sensor_type, \
> > +	.addr = MAKE_SENSOR_ADDRESS(size, bank, index) \
> > +	}
> > +
> > +enum known_ec_sensor {
> > +	SENSOR_TEMP_CHIPSET,
> > +	SENSOR_TEMP_CPU,
> > +	SENSOR_TEMP_MB,
> > +	SENSOR_TEMP_T_SENSOR,
> > +	SENSOR_TEMP_VRM,
> > +	SENSOR_FAN_CPU_OPT,
> > +	SENSOR_FAN_CHIPSET,
> > +	SENSOR_FAN_WATER_FLOW,
> > +	SENSOR_CURR_CPU,
> > +	SENSOR_TEMP_WATER_IN,
> > +	SENSOR_TEMP_WATER_OUT,
> > +	SENSOR_MAX
> > +};
> > +
> > +/*
> > + * Array of the all known sensors for ASUS EC controllers
> > + */
> > +static const struct ec_sensor_info known_ec_sensors[] = {
> > +	[SENSOR_TEMP_CHIPSET] = EC_SENSOR("Chipset", hwmon_temp,
> > 1, 0x00, 0x3a),
> > +	[SENSOR_TEMP_CPU] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00,
> > 0x3b),
> > +	[SENSOR_TEMP_MB] = EC_SENSOR("Motherboard", hwmon_temp, 1,
> > 0x00, 0x3c),
> > +	[SENSOR_TEMP_T_SENSOR] = EC_SENSOR("T_Sensor", hwmon_temp,
> > 1, 0x00, 0x3d),
> > +	[SENSOR_TEMP_VRM] = EC_SENSOR("VRM", hwmon_temp, 1, 0x00,
> > 0x3e),
> > +	[SENSOR_FAN_CPU_OPT] = EC_SENSOR("CPU_Opt", hwmon_fan, 2,
> > 0x00, 0xb0),
> > +	[SENSOR_FAN_CHIPSET] = EC_SENSOR("Chipset", hwmon_fan, 2,
> > 0x00, 0xb4),
> > +	[SENSOR_FAN_WATER_FLOW] = EC_SENSOR("Water_Flow",
> > hwmon_fan, 2, 0x00, 0xbc),
> > +	[SENSOR_CURR_CPU] = EC_SENSOR("CPU", hwmon_curr, 1, 0x00,
> > 0xf4),
> > +	[SENSOR_TEMP_WATER_IN] = EC_SENSOR("Water_In", hwmon_temp,
> > 1, 0x01, 0x00),
> > +	[SENSOR_TEMP_WATER_OUT] = EC_SENSOR("Water_Out",
> > hwmon_temp, 1, 0x01, 0x01), +};
> > +
> > +static const enum known_ec_sensor
> > known_board_sensors[BOARD_MAX][SENSOR_MAX + 1] = {
> > +	[BOARD_PW_X570_A] = {
> > +		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU,
> > SENSOR_TEMP_MB, SENSOR_TEMP_VRM,
> > +		SENSOR_FAN_CHIPSET,
> > +		SENSOR_MAX
> > +	},
> > +	[BOARD_R_C8H] = {
> > +		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU,
> > SENSOR_TEMP_MB,
> > +		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> > +		SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
> > +		SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET,
> > SENSOR_FAN_WATER_FLOW,
> > +		SENSOR_CURR_CPU,
> > +		SENSOR_MAX
> > +	},
> > +	[BOARD_R_C8DH] = { /* Same as Hero but without chipset fan
> > */
> > +		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU,
> > SENSOR_TEMP_MB,
> > +		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> > +		SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
> > +		SENSOR_FAN_CPU_OPT, SENSOR_FAN_WATER_FLOW,
> > +		SENSOR_CURR_CPU,
> > +		SENSOR_MAX
> > +	},
> > +	[BOARD_R_C8F] = { /* Same as Hero but without water */
> > +		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU,
> > SENSOR_TEMP_MB,
> > +		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> > +		SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET,
> > +		SENSOR_CURR_CPU,
> > +		SENSOR_MAX
> > +	},
> > +	[BOARD_RS_B550_E_G] = {
> > +		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU,
> > SENSOR_TEMP_MB,
> > +		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> > +		SENSOR_FAN_CPU_OPT,
> > +		SENSOR_CURR_CPU,
> > +		SENSOR_MAX
> > +	},
> > +	[BOARD_RS_X570_E_G] = {
> > +		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU,
> > SENSOR_TEMP_MB,
> > +		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
> > +		SENSOR_FAN_CHIPSET,
> > +		SENSOR_MAX
> > +	},
> > +};
> > +
> > +struct ec_sensor {
> > +	enum known_ec_sensor info_index;
> > +	u32 cached_value;
> > +};
> > +
> > +/**
> > + * struct asus_wmi_ec_info - sensor info.
> > + * @sensors: list of sensors.
> > + * @read_arg: UTF-16 string to pass to BRxx() WMI function.
> > + * @read_buffer: WMI function output.
> > + * @nr_sensors: number of board EC sensors.
> > + * @nr_registers: number of EC registers to read (sensor might
> > span more than
> > + *                         1 register).
> > + * @last_updated: in jiffies.
> > + */
> > +struct asus_wmi_ec_info {
> > +	struct ec_sensor sensors[SENSOR_MAX];
> > +	char read_arg[((ASUS_WMI_BLOCK_READ_REGISTERS_MAX * 4) +
> > 1) * 2];
> > +	u8 read_buffer[ASUS_WMI_BLOCK_READ_REGISTERS_MAX];
> > +	unsigned int nr_sensors;
> > +	unsigned int nr_registers;
> > +	unsigned long last_updated;
> > +};
> > +
> > +struct asus_wmi_sensors {
> > +	/* lock access to instrnal cache */
> > +	struct mutex lock;
> > +	struct asus_wmi_ec_info ec;
> > +
> > +	int ec_board;
> > +};
> > +
> > +struct asus_wmi_data {
> > +	int ec_board;
> > +};
> > +
> > +static void asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info
> > *ec, int board) +{
> > +	const enum known_ec_sensor *bsi =
> > known_board_sensors[board];
> > +	struct ec_sensor *s = ec->sensors;
> > +	int i;
> > +
> > +	ec->nr_sensors = 0;
> > +	ec->nr_registers = 0;
> > +
> > +	for (i = 0; i < SENSOR_MAX && bsi[i] != SENSOR_MAX; i++) {
> > +		s[i].info_index = bsi[i];
> > +		s[i].cached_value = 0;
> > +		ec->nr_sensors++;
> > +		ec->nr_registers +=
> > known_ec_sensors[bsi[i]].addr.size;
> > +	}
> > +}
> > +
> > +/*
> > + * The next four functions converts to/from BRxx string argument
> > format
> > + * The format of the string is as follows:
> > + * The string consists of two-byte UTF-16 characters
> > + * The value of the very first byte int the string is equal to the
> > total length
> > + * of the next string in bytes, thus excluding the first two-byte
> > character
> > + * The rest of the string encodes pairs of (bank, index) pairs,
> > where both
> > + * values are byte-long (0x00 to 0xFF)
> > + * Numbers are encoded as UTF-16 hex values
> > + */
> > +static void asus_wmi_ec_decode_reply_buffer(const u8 *inp, u8 *out)
> > +{
> > +	unsigned int len = ACPI_MIN(ASUS_WMI_MAX_BUF_LEN, inp[0] /
> > 4);
> > +	char buffer[ASUS_WMI_MAX_BUF_LEN * 2];
> > +	const char *pos = buffer;
> > +	const u8 *data = inp + 2;
> > +	unsigned int i;
> > +
> > +	utf16s_to_utf8s((wchar_t *)data, len * 2,
> > UTF16_LITTLE_ENDIAN, buffer, len * 2); +
> > +	for (i = 0; i < len; i++, pos += 2)
> > +		out[i] = (hex_to_bin(pos[0]) << 4) +
> > hex_to_bin(pos[1]); +}
> > +
> > +static void asus_wmi_ec_encode_registers(u16 *registers, u8 len,
> > char *out) +{
> > +	char buffer[ASUS_WMI_MAX_BUF_LEN * 2];
> > +	char *pos = buffer;
> > +	unsigned int i;
> > +	u8 byte;
> > +
> > +	*out++ = len * 8;
> > +	*out++ = 0;
> > +
> > +	for (i = 0; i < len; i++) {
> > +		byte = registers[i] >> 8;
> > +		*pos = hex_asc_hi(byte);
> > +		pos++;
> > +		*pos = hex_asc_lo(byte);
> > +		pos++;
> > +		byte = registers[i];
> > +		*pos = hex_asc_hi(byte);
> > +		pos++;
> > +		*pos = hex_asc_lo(byte);
> > +		pos++;
> > +	}
> > +
> > +	utf8s_to_utf16s(buffer, len * 4, UTF16_LITTLE_ENDIAN,
> > (wchar_t *)out, len * 4); +}
> > +
> > +static void asus_wmi_ec_make_block_read_query(struct
> > asus_wmi_ec_info *ec) +{
> > +	u16 registers[ASUS_WMI_BLOCK_READ_REGISTERS_MAX];
> > +	const struct ec_sensor_info *si;
> > +	long i, j, register_idx = 0;
> > +
> > +	/*
> > +	 * if we can get values for all the registers in a single
> > query,
> > +	 * the query will not change from call to call
> > +	 */
> > +	if (ec->nr_registers <= ASUS_WMI_BLOCK_READ_REGISTERS_MAX
> > &&
> > +	    ec->read_arg[0] > 0) {
> > +		/* no need to update */
> > +		return;
> > +	}
> > +
> > +	for (i = 0; i < ec->nr_sensors; i++) {
> > +		si = &known_ec_sensors[ec->sensors[i].info_index];
> > +		for (j = 0; j < si->addr.size;
> > +		     j++, register_idx++) {
> > +			registers[register_idx] = (si->addr.bank
> > << 8) + si->addr.index + j;
> > +		}
> > +	}
> > +
> > +	asus_wmi_ec_encode_registers(registers, ec->nr_registers,
> > ec->read_arg); +}
> > +
> > +static int asus_wmi_ec_block_read(u32 method_id, char *query, u8
> > *out) +{
> > +	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER,
> > +				      NULL };
> > +	struct acpi_buffer input;
> > +	union acpi_object *obj;
> > +	acpi_status status;
> > +
> > +	/* the first byte of the BRxx() argument string has to be
> > the string size */
> > +	input.length = (acpi_size)query[0] + 2;
> > +	input.pointer = query;
> > +	status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
> > method_id, &input,
> > +				     &output);
> > +	if (ACPI_FAILURE(status))
> > +		return -EIO;
> > +
> > +	obj = output.pointer;
> > +	if (!obj || obj->type != ACPI_TYPE_BUFFER) {
> > +		if (!obj)
> > +			acpi_os_free(output.pointer);
> > +
> > +		return -EIO;
> > +	}
> > +	asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, out);
> > +	acpi_os_free(output.pointer);
> > +	return 0;
> > +}
> > +
> > +static int asus_wmi_ec_update_ec_sensors(struct asus_wmi_ec_info
> > *ec) +{
> > +	const struct ec_sensor_info *si;
> > +	struct ec_sensor *s;
> > +
> > +	u32 value;
> > +	int status;
> > +	u8 i_sensor, read_reg_ct;
> > +
> > +	asus_wmi_ec_make_block_read_query(ec);
> > +	status =
> > asus_wmi_ec_block_read(ASUSWMI_METHODID_BLOCK_READ_EC,
> > +					ec->read_arg,
> > +					ec->read_buffer);
> > +	if (status)
> > +		return status;
> > +
> > +	read_reg_ct = 0;
> > +	for (i_sensor = 0; i_sensor < ec->nr_sensors; i_sensor++) {
> > +		s = &ec->sensors[i_sensor];
> > +		si = &known_ec_sensors[s->info_index];
> > +
> > +		if (si->addr.size == 1)
> > +			value = ec->read_buffer[read_reg_ct];
> > +		else if (si->addr.size == 2)
> > +			value =
> > get_unaligned_le16(&ec->read_buffer[read_reg_ct]);
> > +		else if (si->addr.size == 4)
> > +			value =
> > get_unaligned_le32(&ec->read_buffer[read_reg_ct]); +
> > +		read_reg_ct += si->addr.size;
> > +		s->cached_value = value;
> > +	}
> > +	return 0;
> > +}
> > +
> > +static int asus_wmi_ec_scale_sensor_value(u32 value, int data_type)
> > +{
> > +	switch (data_type) {
> > +	case hwmon_curr:
> > +	case hwmon_temp:
> > +	case hwmon_in:
> > +		return value * KILO;
> > +	default:
> > +		return value;
> > +	}
> > +}
> > +
> > +static int asus_wmi_ec_find_sensor_index(const struct
> > asus_wmi_ec_info *ec,
> > +					 enum hwmon_sensor_types
> > type, int channel) +{
> > +	int i;
> > +
> > +	for (i = 0; i < ec->nr_sensors; i++) {
> > +		if
> > (known_ec_sensors[ec->sensors[i].info_index].type == type) {
> > +			if (channel == 0)
> > +				return i;
> > +
> > +			channel--;
> > +		}
> > +	}
> > +	return -EINVAL;
> > +}
> > +
> > +static int asus_wmi_ec_get_cached_value_or_update(int sensor_index,
> > +						  struct
> > asus_wmi_sensors *state,
> > +						  u32 *value)
> > +{
> > +	int ret;
> > +
> > +	if (time_after(jiffies, state->ec.last_updated + HZ)) {
> > +		ret = asus_wmi_ec_update_ec_sensors(&state->ec);
> > +		if (ret)
> > +			return ret;
> > +
> > +		state->ec.last_updated = jiffies;
> > +	}
> > +
> > +	*value = state->ec.sensors[sensor_index].cached_value;
> > +	return 0;
> > +}
> > +
> > +/*
> > + * Now follow the functions that implement the hwmon interface
> > + */
> > +
> > +static int asus_wmi_ec_hwmon_read(struct device *dev, enum
> > hwmon_sensor_types type,
> > +				  u32 attr, int channel, long *val)
> > +{
> > +	struct asus_wmi_sensors *sensor_data =
> > dev_get_drvdata(dev);
> > +	int ret, sidx, info_index;
> > +	u32 value = 0;
> > +
> > +	sidx = asus_wmi_ec_find_sensor_index(&sensor_data->ec,
> > type, channel);
> > +	if (sidx < 0)
> > +		return sidx;
> > +
> > +	mutex_lock(&sensor_data->lock);
> > +	ret = asus_wmi_ec_get_cached_value_or_update(sidx,
> > sensor_data, &value);
> > +	mutex_unlock(&sensor_data->lock);
> > +	if (ret)
> > +		return ret;
> > +
> > +	info_index = sensor_data->ec.sensors[sidx].info_index;
> > +	*val = asus_wmi_ec_scale_sensor_value(value,
> > +
> > known_ec_sensors[info_index].type); +
> > +	return ret;
> > +}
> > +
> > +static int asus_wmi_ec_hwmon_read_string(struct device *dev,
> > +					 enum hwmon_sensor_types
> > type, u32 attr,
> > +					 int channel, const char
> > **str) +{
> > +	struct asus_wmi_sensors *sensor_data =
> > dev_get_drvdata(dev);
> > +	int sensor_index;
> > +
> > +	sensor_index =
> > asus_wmi_ec_find_sensor_index(&sensor_data->ec, type, channel);
> > +	*str =
> > known_ec_sensors[sensor_data->ec.sensors[sensor_index].info_index].label;
> > +
> > +	return 0;
> > +}
> > +
> > +static umode_t asus_wmi_ec_hwmon_is_visible(const void *drvdata,
> > +					    enum
> > hwmon_sensor_types type, u32 attr,
> > +					    int channel)
> > +{
> > +	int index;
> > +	const struct asus_wmi_sensors *sensor_data = drvdata;
> > +
> > +	index = asus_wmi_ec_find_sensor_index(&sensor_data->ec,
> > type, channel); +
> > +	return index == 0xff ? 0 : 0444;
> > +}
> > +
> > +static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info
> > *asus_wmi_hwmon_chan,
> > +					struct device *dev, int
> > num,
> > +					enum hwmon_sensor_types
> > type, u32 config) +{
> > +	u32 *cfg;
> > +
> > +	cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL);
> > +	if (!cfg)
> > +		return -ENOMEM;
> > +
> > +	asus_wmi_hwmon_chan->type = type;
> > +	asus_wmi_hwmon_chan->config = cfg;
> > +	memset32(cfg, config, num);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct hwmon_ops asus_wmi_ec_hwmon_ops = {
> > +	.is_visible = asus_wmi_ec_hwmon_is_visible,
> > +	.read = asus_wmi_ec_hwmon_read,
> > +	.read_string = asus_wmi_ec_hwmon_read_string,
> > +};
> > +
> > +static struct hwmon_chip_info asus_wmi_ec_chip_info = {
> > +	.ops = &asus_wmi_ec_hwmon_ops,
> > +};
> > +
> > +static int asus_wmi_ec_configure_sensor_setup(struct
> > platform_device *pdev,
> > +					      struct
> > asus_wmi_sensors *sensor_data) +{
> > +	struct hwmon_channel_info *asus_wmi_hwmon_chan;
> > +	const struct hwmon_channel_info **ptr_asus_wmi_ci;
> > +	int nr_count[hwmon_max] = { 0 }, nr_types = 0;
> > +	const struct hwmon_chip_info *chip_info;
> > +	struct device *dev = &pdev->dev;
> > +	const struct ec_sensor_info *si;
> > +	enum hwmon_sensor_types type;
> > +	struct device *hwdev;
> > +	int i;
> > +
> > +	asus_wmi_ec_fill_board_sensors(&sensor_data->ec,
> > sensor_data->ec_board); +
> > +	if (!sensor_data->ec.nr_sensors)
> > +		return -ENODEV;
> > +
> > +	for (i = 0; i < sensor_data->ec.nr_sensors; i++) {
> > +		si =
> > &known_ec_sensors[sensor_data->ec.sensors[i].info_index];
> > +		if (!nr_count[si->type])
> > +			nr_types++;
> > +		nr_count[si->type]++;
> > +	}
> > +
> > +	if (nr_count[hwmon_temp]) {
> > +		nr_count[hwmon_chip]++;
> > +		nr_types++;
> > +	}
> > +
> > +	asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types,
> > +
> > sizeof(*asus_wmi_hwmon_chan),
> > +					   GFP_KERNEL);
> > +	if (!asus_wmi_hwmon_chan)
> > +		return -ENOMEM;
> > +
> > +	ptr_asus_wmi_ci = devm_kcalloc(dev, nr_types + 1,
> > +				       sizeof(*ptr_asus_wmi_ci),
> > GFP_KERNEL);
> > +	if (!ptr_asus_wmi_ci)
> > +		return -ENOMEM;
> > +
> > +	asus_wmi_ec_chip_info.info = ptr_asus_wmi_ci;
> > +	chip_info = &asus_wmi_ec_chip_info;
> > +
> > +	for (type = 0; type < hwmon_max; type++) {
> > +		if (!nr_count[type])
> > +			continue;
> > +
> > +		asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan,
> > dev,
> > +					     nr_count[type], type,
> > +
> > hwmon_attributes[type]);
> > +		*ptr_asus_wmi_ci++ = asus_wmi_hwmon_chan++;
> > +	}
> > +
> > +	dev_dbg(&pdev->dev, "%s board has %d EC sensors that span
> > %d registers",
> > +		asus_wmi_ec_boards_names[sensor_data->ec_board],
> > +		sensor_data->ec.nr_sensors,
> > +		sensor_data->ec.nr_registers);
> > +
> > +	hwdev = devm_hwmon_device_register_with_info(dev,
> > KBUILD_MODNAME,
> > +						     sensor_data,
> > chip_info, NULL); +
> > +	return PTR_ERR_OR_ZERO(hwdev);
> > +}
> > +
> > +static int asus_wmi_probe(struct platform_device *pdev)
> > +{
> > +	struct asus_wmi_sensors *sensor_data;
> > +	struct device *dev = &pdev->dev;
> > +	struct asus_wmi_data *data;
> > +
> > +	data = dev_get_platdata(dev);
> > +
> > +	sensor_data = devm_kzalloc(dev, sizeof(struct
> > asus_wmi_sensors),
> > +				   GFP_KERNEL);
> > +	if (!sensor_data)
> > +		return -ENOMEM;
> > +
> > +	mutex_init(&sensor_data->lock);
> > +	sensor_data->ec_board = data->ec_board;
> > +
> > +	platform_set_drvdata(pdev, sensor_data);
> > +
> > +	/* ec init */
> > +	return asus_wmi_ec_configure_sensor_setup(pdev,
> > +						  sensor_data);
> > +}
> > +
> > +static struct platform_driver asus_wmi_sensors_platform_driver = {
> > +	.driver = {
> > +		.name	= "asus-wmi-sensors",
> > +	},
> > +	.probe = asus_wmi_probe,
> > +};
> > +
> > +static struct platform_device *sensors_pdev;
> > +
> > +static int __init asus_wmi_init(void)
> > +{
> > +	const char *board_vendor, *board_name;
> > +	struct asus_wmi_data data;
> > +
> > +	data.ec_board = -1;
> > +
> > +	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
> > +	board_name = dmi_get_system_info(DMI_BOARD_NAME);
> > +
> > +	if (board_vendor && board_name &&
> > +	    !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
> > +		if (!wmi_has_guid(ASUSWMI_MONITORING_GUID))
> > +			return -ENODEV;
> > +
> > +		data.ec_board =
> > match_string(asus_wmi_ec_boards_names,
> > +
> > ARRAY_SIZE(asus_wmi_ec_boards_names),
> > +					     board_name);
> > +	}
> > +
> > +	/* Nothing to support */
> > +	if (data.ec_board < 0)
> > +		return -ENODEV;
> > +
> > +	sensors_pdev =
> > platform_create_bundle(&asus_wmi_sensors_platform_driver,
> > +					      asus_wmi_probe,
> > +					      NULL, 0,
> > +					      &data, sizeof(struct
> > asus_wmi_data)); +
> > +	return PTR_ERR_OR_ZERO(sensors_pdev);
> > +}
> > +module_init(asus_wmi_init);
> > +
> > +static void __exit asus_wmi_exit(void)
> > +{
> > +	platform_device_unregister(sensors_pdev);
> > +
> > platform_driver_unregister(&asus_wmi_sensors_platform_driver); +}
> > +module_exit(asus_wmi_exit);
> > +
> > +MODULE_AUTHOR("Ed Brindley <kernel@...davale.org>");
> > +MODULE_AUTHOR("Eugene Shalygin <eugene.shalygin@...il.com>");
> > +MODULE_DESCRIPTION("Asus WMI Sensors Driver");
> > +MODULE_LICENSE("GPL");
> >   
> 

Powered by blists - more mailing lists