lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211008002225.2426-10-ansuelsmth@gmail.com>
Date:   Fri,  8 Oct 2021 02:22:19 +0200
From:   Ansuel Smith <ansuelsmth@...il.com>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Vladimir Oltean <olteanv@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Russell King <linux@...linux.org.uk>,
        Ansuel Smith <ansuelsmth@...il.com>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [net-next PATCH v2 09/15] net: dsa: qca8k: move rgmii delay detection to phylink mac_config

Future proof commit. This switch have 2 CPU port and one valid
configuration is first CPU port set to sgmii and second CPU port set to
regmii-id. The current implementation detects delay only for CPU port
zero set to rgmii and doesn't count any delay set in a secondary CPU
port. Drop the current delay scan function and move it to the phylink
mac_config to generilize and implicitly add support for secondary CPU
port set to rgmii-id.

Signed-off-by: Ansuel Smith <ansuelsmth@...il.com>
---
 drivers/net/dsa/qca8k.c | 122 +++++++++++++++-------------------------
 drivers/net/dsa/qca8k.h |   2 -
 2 files changed, 45 insertions(+), 79 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 3a040a3ed58e..05ecec4ebc01 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -888,68 +888,6 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
 	return 0;
 }
 
-static int
-qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv)
-{
-	struct device_node *port_dn;
-	phy_interface_t mode;
-	struct dsa_port *dp;
-	u32 val;
-
-	/* CPU port is already checked */
-	dp = dsa_to_port(priv->ds, 0);
-
-	port_dn = dp->dn;
-
-	/* Check if port 0 is set to the correct type */
-	of_get_phy_mode(port_dn, &mode);
-	if (mode != PHY_INTERFACE_MODE_RGMII_ID &&
-	    mode != PHY_INTERFACE_MODE_RGMII_RXID &&
-	    mode != PHY_INTERFACE_MODE_RGMII_TXID) {
-		return 0;
-	}
-
-	switch (mode) {
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-		if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val))
-			val = 2;
-		else
-			/* Switch regs accept value in ns, convert ps to ns */
-			val = val / 1000;
-
-		if (val > QCA8K_MAX_DELAY) {
-			dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
-			val = 3;
-		}
-
-		priv->rgmii_rx_delay = val;
-		/* Stop here if we need to check only for rx delay */
-		if (mode != PHY_INTERFACE_MODE_RGMII_ID)
-			break;
-
-		fallthrough;
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val))
-			val = 1;
-		else
-			/* Switch regs accept value in ns, convert ps to ns */
-			val = val / 1000;
-
-		if (val > QCA8K_MAX_DELAY) {
-			dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
-			val = 3;
-		}
-
-		priv->rgmii_tx_delay = val;
-		break;
-	default:
-		return 0;
-	}
-
-	return 0;
-}
-
 static int
 qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
 {
@@ -1026,10 +964,6 @@ qca8k_setup(struct dsa_switch *ds)
 	if (ret)
 		return ret;
 
-	ret = qca8k_setup_of_rgmii_delay(priv);
-	if (ret)
-		return ret;
-
 	ret = qca8k_setup_mac_pwr_sel(priv);
 	if (ret)
 		return ret;
@@ -1201,7 +1135,8 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 			 const struct phylink_link_state *state)
 {
 	struct qca8k_priv *priv = ds->priv;
-	u32 reg, val;
+	struct dsa_port *dp;
+	u32 reg, val, delay;
 	int ret;
 
 	switch (port) {
@@ -1252,17 +1187,50 @@ qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
-		/* RGMII_ID needs internal delay. This is enabled through
-		 * PORT5_PAD_CTRL for all ports, rather than individual port
-		 * registers
+		dp = dsa_to_port(ds, port);
+		val = QCA8K_PORT_PAD_RGMII_EN;
+
+		if (state->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+		    state->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+			if (of_property_read_u32(dp->dn, "tx-internal-delay-ps", &delay))
+				delay = 1;
+			else
+				/* Switch regs accept value in ns, convert ps to ns */
+				delay = delay / 1000;
+
+			if (delay > QCA8K_MAX_DELAY) {
+				dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
+				delay = 3;
+			}
+
+			val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+			       QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+		}
+
+		if (state->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+		    state->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+			if (of_property_read_u32(dp->dn, "rx-internal-delay-ps", &delay))
+				delay = 2;
+			else
+				/* Switch regs accept value in ns, convert ps to ns */
+				delay = delay / 1000;
+
+			if (delay > QCA8K_MAX_DELAY) {
+				dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
+				delay = 3;
+			}
+
+			val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+			       QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+		}
+
+		/* Set RGMII delay based on the selected values */
+		qca8k_write(priv, reg, val);
+
+		/* QCA8337 requires to set rgmii rx delay for all ports.
+		 * This is enabled through PORT5_PAD_CTRL for all ports,
+		 * rather than individual port registers.
 		 */
-		qca8k_write(priv, reg,
-			    QCA8K_PORT_PAD_RGMII_EN |
-			    QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) |
-			    QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) |
-			    QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
-			    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
-		/* QCA8337 requires to set rgmii rx delay */
 		if (priv->switch_id == QCA8K_ID_QCA8337)
 			qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
 				    QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 3fded69a6839..a36ef43e3847 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -261,8 +261,6 @@ struct qca8k_match_data {
 struct qca8k_priv {
 	u8 switch_id;
 	u8 switch_revision;
-	u8 rgmii_tx_delay;
-	u8 rgmii_rx_delay;
 	bool legacy_phy_port_mapping;
 	struct regmap *regmap;
 	struct mii_bus *bus;
-- 
2.32.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ