| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211008113931.134847-6-krzysztof.kozlowski@canonical.com>
Date: Fri, 8 Oct 2021 13:39:31 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Lee Jones <lee.jones@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org
Cc: Sam Protsenko <semen.protsenko@...aro.org>,
Rob Herring <robh@...nel.org>
Subject: [PATCH v4 09/10] dt-bindings: mfd: samsung,s5m8767: convert to dtschema
Convert the MFD part of Samsung S5M8767 PMIC to DT schema format.
Previously the bindings were mostly in mfd/samsung,sec-core.txt.
Since all of bindings for Samsung S2M and S5M family of PMICs were
converted from mfd/samsung,sec-core.txt to respective dtschema file,
remove the former one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../bindings/mfd/samsung,s5m8767.yaml | 269 ++++++++++++++++++
.../bindings/mfd/samsung,sec-core.txt | 86 ------
MAINTAINERS | 2 +-
3 files changed, 270 insertions(+), 87 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..b2529a48c890
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
+
+description: |
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ The Samsung S5M8767 is a Power Management IC which includes voltage
+ and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+ compatible:
+ const: samsung,s5m8767-pmic
+
+ clocks:
+ $ref: ../clock/samsung,s2mps11.yaml
+ description:
+ Child node describing clock provider.
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ $ref: ../regulator/samsung,s5m8767.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ s5m8767,pmic-buck2-dvs-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+ description: |
+ A set of 8 voltage values in micro-volt (uV) units for buck2 when
+ changing voltage using gpio dvs.
+
+ s5m8767,pmic-buck3-dvs-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+ description: |
+ A set of 8 voltage values in micro-volt (uV) units for buck3 when
+ changing voltage using gpio dvs.
+
+ s5m8767,pmic-buck4-dvs-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+ description: |
+ A set of 8 voltage values in micro-volt (uV) units for buck4 when
+ changing voltage using gpio dvs.
+
+ s5m8767,pmic-buck-ds-gpios:
+ minItems: 3
+ maxItems: 3
+ description: |
+ GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
+ It is one-to-one mapped to dvs gpio lines.
+
+ s5m8767,pmic-buck2-uses-gpio-dvs:
+ type: boolean
+ description: buck2 can be controlled by gpio dvs.
+
+ s5m8767,pmic-buck3-uses-gpio-dvs:
+ type: boolean
+ description: buck3 can be controlled by gpio dvs.
+
+ s5m8767,pmic-buck4-uses-gpio-dvs:
+ type: boolean
+ description: buck4 can be controlled by gpio dvs.
+
+ s5m8767,pmic-buck-default-dvs-idx:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minimum: 0
+ maximum: 7
+ default: 0
+ description: |
+ Default voltage setting selected from the possible 8 options selectable
+ by the dvs gpios. The value of this property should be between 0 and 7.
+ If not specified or if out of range, the default value of this property
+ is set to 0.
+
+ s5m8767,pmic-buck-dvs-gpios:
+ minItems: 3
+ maxItems: 3
+ description: |
+ GPIO specifiers for three host gpio's used for dvs.
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - reg
+ - regulators
+ - s5m8767,pmic-buck-ds-gpios
+
+dependencies:
+ s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+ s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+ s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+ s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
+ s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
+ s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
+
+additionalProperties: false
+
+allOf:
+ - if:
+ required:
+ - s5m8767,pmic-buck2-uses-gpio-dvs
+ then:
+ properties:
+ s5m8767,pmic-buck3-uses-gpio-dvs: false
+ s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+ - if:
+ required:
+ - s5m8767,pmic-buck3-uses-gpio-dvs
+ then:
+ properties:
+ s5m8767,pmic-buck2-uses-gpio-dvs: false
+ s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+ - if:
+ required:
+ - s5m8767,pmic-buck4-uses-gpio-dvs
+ then:
+ properties:
+ s5m8767,pmic-buck2-uses-gpio-dvs: false
+ s5m8767,pmic-buck3-uses-gpio-dvs: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
+ <&gpd1 1 GPIO_ACTIVE_LOW>,
+ <&gpd1 2 GPIO_ACTIVE_LOW>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+ <&gpx2 4 GPIO_ACTIVE_LOW>,
+ <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ // ...
+
+ BUCK1 {
+ regulator-name = "VDD_MIF";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ BUCK2 {
+ regulator-name = "VDD_ARM";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ // ...
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+ <&gpx2 4 GPIO_ACTIVE_LOW>,
+ <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+ };
+
+ regulators {
+ LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ // ...
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
deleted file mode 100644
index c68cdd365153..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Binding for Samsung S2M and S5M family multi-function device
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-
-The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
-of multi-function devices which include voltage and current regulators, RTC,
-charger controller, clock outputs and other sub-blocks. It is interfaced
-to the host controller using an I2C interface. Each sub-block is usually
-addressed by the host system using different I2C slave addresses.
-
-
-This document describes bindings for main device node. Optional sub-blocks
-must be a sub-nodes to it. Bindings for them can be found in:
- - bindings/regulator/samsung,s2mpa01.txt
- - bindings/regulator/samsung,s2mps11.txt
- - bindings/regulator/samsung,s5m8767.txt
- - bindings/clock/samsung,s2mps11.txt
-
-
-Required properties:
- - compatible: Should be one of the following
- - "samsung,s2mpa01-pmic",
- - "samsung,s2mps11-pmic",
- - "samsung,s2mps13-pmic",
- - "samsung,s2mps14-pmic",
- - "samsung,s2mps15-pmic",
- - "samsung,s2mpu02-pmic",
- - "samsung,s5m8767-pmic".
- - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
- - interrupts: Interrupt specifiers for interrupt sources.
- - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
- down. When the system is suspended it will always go down thus triggerring
- unwanted buck warm reset (setting buck voltages to default values).
- - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
- connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
- register to turn off the power. Usually the ACOKB is pulled up to VBATT so
- when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Example:
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
-
- s2m_osc: clocks {
- compatible = "samsung,s2mps11-clk";
- #clock-cells = <1>;
- clock-output-names = "xx", "yy", "zz";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index dc931242a7f9..e086102e8340 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16638,7 +16638,7 @@ L: linux-samsung-soc@...r.kernel.org
S: Supported
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
F: Documentation/devicetree/bindings/mfd/samsung,s2m*.yaml
-F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+F: Documentation/devicetree/bindings/mfd/samsung,s5m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
F: drivers/clk/clk-s2mps11.c
--
2.30.2
Powered by blists - more mailing lists