linux-kernel - Re: RISC-V: patched kexec-tools on github for review/testing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <d75edc49681473bf8b88e474ae61b524@mailhost.ics.forth.gr>
Date:   Sat, 09 Oct 2021 16:25:05 +0300
From:   Nick Kossifidis <mick@....forth.gr>
To:     Alexandre Ghiti <alexandre.ghiti@...onical.com>
Cc:     Nick Kossifidis <mick@....forth.gr>, ebiederm@...ssion.com,
        kexec@...ts.infradead.org,
        linux-riscv <linux-riscv@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org List" <linux-kernel@...r.kernel.org>,
        Alexandre ghiti <alex@...ti.fr>, rppt@...nel.org,
        geert+renesas@...der.be,
        Stephano Cetola <scetola@...uxfoundation.org>,
        Philipp Tomsich <philipp.tomsich@...ll.eu>,
        Palmer Dabbelt <palmer@...belt.com>,
        Anup Patel <anup.patel@....com>,
        Atish Patra <atish.patra@....com>
Subject: Re: RISC-V: patched kexec-tools on github for review/testing

Στις 2021-10-06 14:10, Alexandre Ghiti έγραψε:
> 
> So I followed the instructions here:
> https://documentation.suse.com/fr-fr/sles/12-SP3/html/SLES-all/cha-tuning-kexec.html#cha-tuning-kexec-basic-usage,
> below the output on an Unmatched board using a vmlinux stored on a sd
> card:
> 
> ubuntu@...ntu:~$ sudo sbin/kexec -l vmlinux --append="$(cat
> /proc/cmdline)" --initrd=/boot/initrd.img
> Warning: No cmdline provided, using append string as cmdline
> Warning: No dtb provided, using /sys/firmware/fdt
> [ 1813.472671] INFO: task kworker/1:0:988 blocked for more than 120 
> seconds.
> [ 1813.478751]       Not tainted 5.15.0-rc1+ #15
> [ 1813.483110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> Could not find a free area of memory of 0x3000 bytes...
> locate_hole failed
> 
> I used the Ubuntu kernel, so this is pretty large:
> -rwxrwxr-x 1 ubuntu ubuntu 277M Oct  5 15:47 vmlinux
> -rw-r--r-- 1 root root 98M Sep 21 03:25 /boot/initrd.img
> 

ACK, I haven't tested initrd much TBH, I usually don't use an initrd, 
and when I do it's a small busybox-based rootfs.

> Then if I don't load the initrd (I sometimes have the same warning as
> above) I can at least kexec the new kernel but it fails to boot:
> 
> ubuntu@...ntu:~$ sudo ./sbin/kexec -e
> Warning: No cmdline or append string provided
> Warning: No dtb provided, using /sys/firmware/fdt
> [...]
> [    0.000000] SBI v0.2 HSM extension detected
> [    0.000000] CPU with hartid=0 is not available
> [    0.000000] ------------[ cut here ]------------
> [    0.000000] kernel BUG at arch/riscv/kernel/smpboot.c:107!
> [    0.000000] Kernel BUG [#1]
> [    0.000000] Modules linked in:
> [    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc1+ #15
> [    0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT)
> [    0.000000] epc : setup_smp+0xcc/0x142
> [    0.000000]  ra : setup_smp+0xc4/0x142
> [    0.000000] epc : ffffffff80a04080 ra : ffffffff80a04078 sp :
> ffffffff81803ec0
> [    0.000000]  gp : ffffffff81a23220 tp : ffffffff81810500 t0 :
> ffffffff81a3551f
> [    0.000000]  t1 : ffffffffffffffff t2 : 0000000000000000 s0 :
> ffffffff81803f00
> [    0.000000]  s1 : 0000000000000000 a0 : 0000000000000000 a1 :
> 0000000000000000
> [    0.000000]  a2 : 0000000000000000 a3 : 0000000000000001 a4 :
> 0000000000000000
> [    0.000000]  a5 : ffffffff80c64500 a6 : 0000000000000004 a7 :
> 000000000000ff00
> [    0.000000]  s2 : 0000000000000005 s3 : 0000000000000000 s4 :
> ffffffff8118f9a8
> [    0.000000]  s5 : 0000000000000007 s6 : ffffffff80c0b790 s7 :
> 0000000080000200
> [    0.000000]  s8 : 0000000000000fff s9 : 0000000081000200 s10:
> 0000000000000018
> [    0.000000]  s11: 000000000000000b t3 : 0000000000ff0000 t4 :
> ffffffffffffffff
> [    0.000000]  t5 : ffffffff80c0b7a0 t6 : ffffffff81803bd8
> [    0.000000] status: 0000000200000100 badaddr: 0000000000000000
> cause: 0000000000000003
> [    0.000000] [<ffffffff80a04080>] setup_smp+0xcc/0x142
> [    0.000000] [<ffffffff80a03d88>] setup_arch+0x56a/0x590
> [    0.000000] [<ffffffff80a00aa2>] start_kernel+0xaa/0xa5c
> [    0.000000] random: get_random_bytes called from
> oops_exit+0x44/0x70 with crng_init=0
> [    0.000000] ---[ end trace 0000000000000000 ]---
> [    0.000000] Kernel panic - not syncing: Attempted to kill the idle 
> task!
> [    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill
> the idle task! ]---
> 
> This reliably fails here.
> 

This looks weird, I'll check it out (we have an unmatched here so I'll 
try to get my hands on it sometime next week).

Did you try kdump ? Do you get the same error ?

BTW this is what I use for testing most of the time:

For kexec:
kexec -l /mnt/shared/vmlinux --reuse-cmdline
kexec -e

For kdump:
kexec -p /mnt/shared/vmlinux
echo c > /proc/sysrq-trigger

Thanks a lot for your time !

Regards,
Nick