| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 9 Oct 2021 14:52:57 -0400
From: Oskar Senft <osk@...gle.com>
To: Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Rob Herring <robh+dt@...nel.org>, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Cc: Oskar Senft <osk@...gle.com>
Subject: [PATCH v5 2/2] hwmon: (nct7802) Make temperature/voltage sensors configurable
This change allows LTD and RTD inputs to be configured via
device tree bindings. If the DT bindings are not present or
invalid, the input configuration is not modified and left at
HW defaults.
Signed-off-by: Oskar Senft <osk@...gle.com>
---
drivers/hwmon/nct7802.c | 133 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 129 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index 604af2f6103a..e28f8eaf9f0f 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -51,6 +51,23 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
#define REG_CHIP_ID 0xfe
#define REG_VERSION_ID 0xff
+/*
+ * Resistance temperature detector (RTD) modes according to 7.2.32 Mode
+ * Selection Register
+ */
+#define RTD_MODE_CURRENT 0x1
+#define RTD_MODE_THERMISTOR 0x2
+#define RTD_MODE_VOLTAGE 0x3
+
+#define MODE_RTD_MASK 0x3
+#define MODE_LTD_EN 0x40
+
+/*
+ * Bit offset for sensors modes in REG_MODE.
+ * Valid for index 0..2, indicating RTD1..3.
+ */
+#define MODE_BIT_OFFSET_RTD(index) ((index) * 2)
+
/*
* Data structures and manipulation thereof
*/
@@ -1038,7 +1055,116 @@ static const struct regmap_config nct7802_regmap_config = {
.volatile_reg = nct7802_regmap_is_volatile,
};
-static int nct7802_init_chip(struct nct7802_data *data)
+static int nct7802_get_channel_config(struct device *dev,
+ struct device_node *node, u8 *mode_mask,
+ u8 *mode_val)
+{
+ u32 reg;
+ const char *type_str, *md_str;
+ u8 md;
+
+ if (!node->name || of_node_cmp(node->name, "channel"))
+ return 0;
+
+ if (of_property_read_u32(node, "reg", ®)) {
+ dev_err(dev, "Could not read reg value for '%s'\n",
+ node->full_name);
+ return -EINVAL;
+ }
+
+ if (reg > 3) {
+ dev_err(dev, "Invalid reg (%u) in '%s'\n", reg,
+ node->full_name);
+ return -EINVAL;
+ }
+
+ if (reg == 0) {
+ if (!of_device_is_available(node))
+ *mode_val &= ~MODE_LTD_EN;
+ else
+ *mode_val |= MODE_LTD_EN;
+ *mode_mask |= MODE_LTD_EN;
+ return 0;
+ }
+
+ /* At this point we have reg >= 1 && reg <= 3 */
+
+ if (!of_device_is_available(node)) {
+ *mode_val &= ~(MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1));
+ *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
+ return 0;
+ }
+
+ if (of_property_read_string(node, "sensor-type", &type_str)) {
+ dev_err(dev, "No type for '%s'\n", node->full_name);
+ return -EINVAL;
+ }
+
+ if (!strcmp(type_str, "voltage")) {
+ *mode_val |= (RTD_MODE_VOLTAGE & MODE_RTD_MASK)
+ << MODE_BIT_OFFSET_RTD(reg - 1);
+ *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
+ return 0;
+ }
+
+ if (strcmp(type_str, "temperature")) {
+ dev_err(dev, "Invalid type '%s' for '%s'\n", type_str,
+ node->full_name);
+ return -EINVAL;
+ }
+
+ if (reg == 3) {
+ /* RTD3 only supports thermistor mode */
+ md = RTD_MODE_THERMISTOR;
+ } else {
+ if (of_property_read_string(node, "temperature-mode",
+ &md_str)) {
+ dev_err(dev, "No mode for '%s'\n", node->full_name);
+ return -EINVAL;
+ }
+
+ if (!strcmp(md_str, "thermal-diode"))
+ md = RTD_MODE_CURRENT;
+ else if (!strcmp(md_str, "thermistor"))
+ md = RTD_MODE_THERMISTOR;
+ else {
+ dev_err(dev, "Invalid mode '%s' for '%s'\n", md_str,
+ node->full_name);
+ return -EINVAL;
+ }
+ }
+
+ *mode_val |= (md & MODE_RTD_MASK) << MODE_BIT_OFFSET_RTD(reg - 1);
+ *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1);
+
+ return 0;
+}
+
+static int nct7802_configure_channels(struct device *dev,
+ struct nct7802_data *data)
+{
+ bool found_channel_config = false;
+ u8 mode_mask = 0, mode_val = 0;
+ struct device_node *node;
+ int err;
+
+ /* Enable local temperature sensor by default */
+ mode_val |= MODE_LTD_EN;
+ mode_mask |= MODE_LTD_EN;
+
+ if (dev->of_node) {
+ for_each_child_of_node(dev->of_node, node) {
+ err = nct7802_get_channel_config(dev, node, &mode_mask,
+ &mode_val);
+ if (err)
+ return err;
+ }
+ }
+
+ return regmap_update_bits(data->regmap, REG_MODE, mode_mask, mode_val);
+}
+
+static int nct7802_init_chip(struct device *dev, struct nct7802_data *data)
{
int err;
@@ -1047,8 +1173,7 @@ static int nct7802_init_chip(struct nct7802_data *data)
if (err)
return err;
- /* Enable local temperature sensor */
- err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40);
+ err = nct7802_configure_channels(dev, data);
if (err)
return err;
@@ -1074,7 +1199,7 @@ static int nct7802_probe(struct i2c_client *client)
mutex_init(&data->access_lock);
mutex_init(&data->in_alarm_lock);
- ret = nct7802_init_chip(data);
+ ret = nct7802_init_chip(dev, data);
if (ret < 0)
return ret;
--
2.33.0.882.g93a45727a2-goog
Powered by blists - more mailing lists